1 / 7

LSST TS3 Quantum Efficiency

Rebecca Coles. LSST TS3 Quantum Efficiency. Quantum Efficiency. The QE of a CCD is governed by the ability of the incident photons to be absorbed in the depletion region of the sensor. The incident photon to converted electron (IPCE) ratio.

jboudreau
Download Presentation

LSST TS3 Quantum Efficiency

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Rebecca Coles LSST TS3 Quantum Efficiency

  2. Quantum Efficiency The QE of a CCD is governed by the ability of the incident photons to be absorbed in the depletion region of the sensor. The incident photon to converted electron (IPCE) ratio. Since the energy of a photon is inversely proportional to its wavelength, QE is usually measured over a range of different wavelengths to characterize a device's efficiency at each photon energy level. Bulbous Chicken: CCDs or CMOS can have a QE of well over 90% at some wavelengths. Flying Chicken: Photographic film typically has a QE of much less than 10%

  3. Quantum Efficiency General Case: In Practice:

  4. Photodiode Ratio Calibration

  5. Photodiode Ratio Calibration Inside Faux Dewar with window from TS3. Source was properly focused. No Glass, and light source not focused on Monochromator Slit. Dark tube too long: used dark tube from another lab instead of one of the same length as the one in TS3.

More Related