Microcyn ® Technology

1. MicroSafe ® High – Level Hospital Grade Disinfectant and SanitizerBased On Microcyn ® Technology

2. Microcyn ® Technology 1- Advantages in Food Processing Industry 2- MicroSafe as Revolutionary Disinfectant and Sanitizer 3- Accreditations/Evaluations 4- MicroSafeUsage and basic protocol.

3. MicroSafe® advantages in food processing and produce industry

4. Food Control 19 (2008) 329–345 Eliminate food-borne illnesses MicroSafe®(super oxidized solution) has demonstrated significant effectiveness in sanitizing all types of food surfaces in food processing plants, animal products and fresh produce.

5. Eliminate food-borne illnesses Kills all pathogens that cause food-borne illness on fresh vegetables, fruits, eggs, poultry and seafood without causing discoloration, aging or harm of any kind…

6. Eliminate food-borne illnesses Kills all pathogens that cause food-borne illness on all types of food processing equipments…

7. 3. MicroSafe® as Revolutionary Disinfectant and Sanitizer – Broad Spectrum Antimicrobial

8. United States Federal Drug Administration (FDA) Approved Label Claim Kill time 30 secs • MicroSafe® Demonstrates rapid activity against a broad spectrum of gram-positive, gram-negative and yeast species with the following in vitro time kill method results in solution: • MRSA - Staphylococcus aureus 99.9999 VRE - Enterococcusfaecalis99.9999 • Staphylococcus aureus99.9999 Escherichia coli 99.9997 • Acinetobacterbaumannii99.9999 Bacteroidesfragilis99.9999 • Candida albicans99.9999 Enterobacteraeroge 99.9999 • Enterococcusfaecium99.9999 Haemophilusinfluenzae99.9993 • Klebsiellaoxytoca99.9999 Klebsiellapneumoniae99.9999 • Micrococcus luteus99.9999 Proteus mirabilis 99.9999 • Pseudomonas aeruginosa99.9998 Serratiamarcescens99.9999 • Staphylococcus epidermidis99.9998 Staphylococcus haemolyticus99.9999 • Staphylococcus homins99.9996 Staphylococcus saprophyticus99.9999 • Streptococcus pyogenes99.9999 Source: Bio-Science Labs (slide 13)

9. There is no other Sterilizing Solution in the world that devastates Pathogens of any kind, in a matter of seconds, without any harmful effects to Human beings and environment • MicroSafe®in accordance with U.S EPA Guidelines • Is a; • Tuberculocidal • Virucidal • Sporicidal • Fungicidal Source: Journal of Hospital Infection (slide 13)

10. Safe in and around the eyes, nose and mouth MicroSafe® is the world's only water based (99.97% water), pH-neutral, non-alcohol, non-toxic sanitizing solution.

11. These Test were performed in accordance U.S EPA Guidelines • MicroSafe ®Disinfectant / sanitizing Solution has been determined to have; • Zero Toxicity • Zero Sensitization • Zero Irritation • In all Sub-Categories shown in the graph to the right.

12. MicroSafe® accreditations and evaluations. Approved by numerous regulatory agencies including FDA , EPA and CE.

14. Kindly connect to WIFI to view the attachments

15. MicroSafe® intended uses and basic protocol

16. MicroSafe® intended use: MicroSafe® is the only sanitizing solution designed and recommended to sprayed in the presence of Humans’ – exposing the public to the solution. MicroSafe® is to be used to spray in aerosol format, to areas and environments which are suspected to serve as a breeding ground for the spread of infectious disease, likely to result in epidemics or pandemics. MicroSafe® is ready for use; No special mixing, dilution or activators are required, No need to rinse – may be allowed air dry on hard surfaces – leaves no harmful residue behind. Safe as Water

17. MicroSafe® is the world’s only sanitizing solution designed and recommended to spray in the presence of Human beings. Machine should be placed on “Max” Setting at all times X liters in X minutes will Disinfect X cubic meters 16 liters in 40 minutes for 720 cubic meters 8 liters in 20 minutes for 360 cubic meters 4 liters in 10 minutes for 180 cubic meters 2 liters in 5 minutes for 90 cubic meters 1 liters in 3.5 minutes for 45 cubic meters Important Note *All fumigation should be done post domestic/terminal cleaning in accordance with the institutions' protocol.

18. Fumigation with MicroSafe® is intended to Disinfect Air-Space (Environment) and Sanitize non-electrical hard surfaces – such as walls, ceilings, non-sensitive durable stations and equipments. Guidelines for Machine Fumigation: Hold machine 1.5-2 meters away from the targeted surface Move machine slowing across the surface you intend to sanitize (creating a fog or mist type of moisture across the targeted surface). Avoid keeping the machine pointed idle at one specific area for more than 10 seconds. The Air-Space and the floor will effectively be disinfected during the time you are targeting the walls and ceilings.

19. Disinfecting and Sterilizing hard surfaces and sensitive electrical equipment with MicroSafe® 500ml spray bottle Guidelines for using 500ml Spray bottle: 1. Hard Surfaces – Non Electrical Hold bottle 4-6 inches away from the targeted surface and spray while moving bottle slowing across the surface you intend to sanitize. Create a heavy mist type of moisture across the targeted surface and let surface sit wet for 1-5 minutes - may be allowed to Air-Dry or wiped dry with clean cloth. 2. Sensitive electrical equipment (Screen, Keyboards, Electrical Panels ETC.) Spray liberally amount of MicroSafe®on clean cloth, thoroughly impregnate the cloth with the solution, then slowly wipe targeted area 2-3 times over.