1 / 11

Clock and Trigger Status

Clock and Trigger Status. T . Blažek, V . Černý , M . Kovaľ , R. Lietava Comenius University Bratislava M. Krivda University of Birmingham. Outline. Final setup for 11 detectors Installation status (02.06. – 03.06.) Cabling Tests and TODO LTU+TTCex inventory

marci
Download Presentation

Clock and Trigger Status

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Clock and Trigger Status T. Blažek, V. Černý, M. Kovaľ, R.Lietava ComeniusUniversity Bratislava M. Krivda UniversityofBirmingham

  2. Outline • Final setup for 11 detectors • Installation status (02.06. – 03.06.) • Cabling • Tests and TODO • LTU+TTCex inventory • LTU firmware update (v.21) • Choke / Error triggers in standalone mode • Start signal delay TTC system update

  3. Clock distribution and trigger flow Triggers Sync. card 40 MHz clock source Trigger inputs L0TP CHOKE/ ERROR TTC Clock + Triggers TTC partition . . . . . . . . . . . . . . . . . . . LTU 1 + TTCex LTU 2 + TTCex LTU 3 + TTCex LTU 11 + TTCex . . . . . . . . . . . . . . . . . . . . . . . TTCrx TTCrx TTCrx TTCrx . . . . . . . . . . . . . . . . . . . . . . . QPLL QPLL QPLL QPLL FEE FEE FEE FEE TTC system update

  4. 11 TTC partitions – final setup Cabling DONE: LTU ↔ TTCex Clock → TTCex TALK → LTU SoB/EoB → LTU Original VME crate: 1 x VME processor 11 x LTU 2 x TTCit Cabling TODO: Choke/Error Optical fibres New VME crate: 11 x TTCex 1 x Clock FO Photo: 2014-06-03 TTC system update

  5. Installation notes • First tests: 11 LTU+TTCex partitions working correctly • Tested using TTCit board; TALK periodic trigger, LTUs in global mode • One issue: TTCex (CHOD - SN21) 1st laser not working (red cap) • Proper tests needed (Dry run with TEL62) • TODO: • Synchronization with TALK (or L0TP) using toggle signal • CANBUS connection (new crate) → DCS • VME processor: SLC5 → SLC6 upgrade (this week) • LTU DIM servers • Detailed Twiki documentation of the setup TTC system update

  6. LTU & TTCex inventory • https://twiki.cern.ch/twiki/bin/view/NA62/TdaqLogistics • LTU and TTCex orders • https://twiki.cern.ch/twiki/bin/view/NA62/TdaqHWDistribution • Current status, green = new : (**) TDAQ TTCex temporarily assigned for GTK (*) Terminating resistor on L0 input (****) 1st laser not working (***) Laser indicating LED not working, lasers are OK TTC system update

  7. LTU & TTCexinventory (2) • 1 LTU+TTCex setup in Marian’s trigger LAB • No other spare NA62 LTUs • ALICE LTUs can be used with limited functionality in LAB • Consult with Marian • Sub-detectors which ordered 1 LTU, but have 1 more in LAB: • CEDAR, CHANTI, RICH • The LTUs belong to: GTK, STRAW, LKR/L0 TTC system update

  8. LTU firmware update • https://twiki.cern.ch/twiki/bin/view/NA62/LTUrelatedSoftware • Latest firmware (v. 21) and software • Updated manual • Choke / Error triggers in standalone emulation • Functionality available only if Choke/Error signals are enabled! (special window in the SW) • Choke (Error) input → active state → emulation is paused, Choke (Error) ON trigger is sent • Choke (Error) input → inactivestate → emulation is resumed, Choke (Error) OFFtrigger is sent • Tested in LAB with external input to CH/ERR • Test with TEL62 needed • Start signal delay (requested by Tonino) • Useful in LAB setup with external pulser (latency added) • User can choose the delay of triggers: • 0 μs (default), 20 μs, 100 μs L0 trigger type 0b100100 Choke on 0b100101 Choke off 0b100110 Error on 0b100111 Error off (typo in technical design) TTC system update

  9. Conclusions • Final setup (11 TTC partitions) • LTU+TTCex boards successfully installed, working correctly • Preparing Choke/Error cables • Proper tests needed • Choke / Error trigger firmware implemented • Tested in LAB and ECN3 with external CH/E inputs • TODO: test with TEL62 TTC system update

  10. Spares TTC system update

  11. Setup Proposal from 2014-02 Meeting TTCit 3 TTCit 2 TTCit 1 • VME CPU • 11 LTUs • 3 TTCit LTU 6 LTU 9 LTU 7 LTU 11 LTU 10 VME Master LTU 8 LTU 1 LTU 2 LTU 3 LTU 4 LTU 5 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 • Clock FO for TTCex inputs • 11 TTCex TTCex1 TTCex 8 TTCex2 TTCex3 TTCex4 TTCex5 TTCex 9 TTCex 6 TTCex 7 TTCex 11 TTCex 10 Clock fan-out (ECL) TTC system update 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

More Related