1 / 5

Cook Stove for Haiti

Cook Stove for Haiti. Project 11461 Jordan Hunter Rob Reid Mike Lagos Brian Knight. Stove Construction. Functioning Stove Design. Annulus. Pot & Water. Air Flow. Fan. Combustion. Packed Bed of Charcoal. Orifices. Layout of Parts on Flat Drum. Assembly Notes.

zea
Download Presentation

Cook Stove for Haiti

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Cook Stove for Haiti Project 11461 Jordan Hunter Rob Reid Mike Lagos Brian Knight Stove Construction

  2. Functioning Stove Design Annulus Pot & Water Air Flow Fan Combustion Packed Bed of Charcoal Orifices

  3. Layout of Parts on Flat Drum

  4. Assembly Notes • Grind paint off of all edges that are to be welded. • Drill Orifice holes 2.54 cm up from bottom of combustion chamber. • Annulus gap around pot is .5cm wide. • Bottom of stove is welded 1.27cm deep into base. • Cut8.89 cm deep by 10.16 cm long rectangle out of Base and outside chamber. Example shown in drum layout on previous page. • Handles are to be cut from top ring of drum that is holding the cover on. • Air inlet to stove should be fabricated to fit after outer chamber and base are welded. This ensures pieces will fit correctly.

  5. Stove Assembly

More Related