1 / 40

Chapter 4 Transients

Chapter 4 Transients. Electrical Engineering and Electronics II. Scott. 2008.9. Main Contents. 1. Solve first-order RC or RL circuits. 2. Understand the concepts of transient response and steady-state response. 3. Relate the transient response of first-order

wang-pruitt
Download Presentation

Chapter 4 Transients

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Chapter 4 Transients Electrical Engineering and Electronics II Scott 2008.9

  2. Main Contents 1. Solve first-order RC or RL circuits. 2. Understand the concepts of transient response and steady-state response. 3. Relate the transient response of first-order circuits to the time constant. 4. Solve RLC circuits in dc steady-state conditions.

  3. Main Contents • Introduction • Initial state and DC Steady State • First-order RC Circuits • First-order RL Circuits • Summary

  4. Conception of steady state and transient state R K R + Switch K is closed Us + _ E E _ C New steady state t Old steady state 4.1 Introduction When t=∞, uc(∞)=Us transient New steady state When t=0,uc(0)=0 Old steady state

  5. Why the transient response happens? I t = 0 K No transient I + R E _  Resistance circuit • Resistor is a energy-consumption element, current is proportional to voltage, no transient response will happen even if changing source

  6. K R + uC E _ C Electric field energy Charging or discharging Change gradually E t • Energy can not change instantly because of accumulating or decaying period.

  7. K R t=0 + iL E _ E/R t Magnetic field energy Change gradually • Energy can not change instantly because of accumulating or decaying period.

  8. Transients • The time-varying currents and voltages resulting from the sudden application of sources, usually due to switching. • By writing circuit equations, we obtain integrodifferential equations.

  9. The causes of transients: 1. Energy storage elements -inductors and capacitors change gradually; 2.Changing circuit, such as switching source.

  10. 4.2 Initial state and steady state t=0+ t=0 t=0- t Assume changing circuit when t=0, then t=0– is end point of old steady state; t=0+ is the start point of transient state. The law of changing circuit From t=0–to t=0+,iL、uC change continuously.

  11. DC Steady State Response • The steps in determining the forced response or steady state response for RLC circuits with dc sources are: • 1. Replace capacitances with open circuits. • 2. Replace inductances with short circuits. • 3. Solve the remaining circuit.

  12. Example 4.1 Find steady-state values of vx and ix in this circuit for t>>0. Answer: vx =5V, ix = 1A t>>0

  13. Exercise 4.3 Find steady-state values of labeled currents and voltages for t>>0. Answer: va =50V, ia = 2A i1 = 2A, i2=1A, i3=1A

  14. How to get initial value Exercise 1: Assuming old circuit is in DC steady state before switch K is closed. how to get uC(0+),iR(0+)? R R K 1 1 4 k 4 k i R t =0 u u (0 ) 8k 12V C 12 V 8 k C – m 2 F R 2 Solution: When t=0-, capacitor is considered as open circuit, we get equivalent circuit. t=0-

  15. How to get initial value R R K 1 1 4 k 4 k i i (0+) R R t =0 + u u (0 ) 8k 12V u (0+) C 12 V 8 k C – C m 2 F R – R 8k 2 2 t=0+ substituting voltage source for uC(0+)

  16. How to get initial value • Exercise 2: Given by R1=4Ω, R2=6Ω, R3=3Ω, C=0.1µF, L=1mH, US=36V, switch S is closed for a long time. Open the switch S whent=0, how to get the initial values of all elements?

  17. Equivalent circuit of First-order circuit Two parts: one (equivalent) capacitor or inductor; a two terminal network with resistance and sources. 4.3 First-order RC Circuits N N L C • First-order circuit Only one (equivalent) capacitor or inductor is included in a linear circuit. or

  18. According to Thevenin Law N N C L iL iC + R + R uL L U uC C U - - 4.3 First-order RC Circuits or

  19. Differential equation of first-order RC circuit iL iC + R + R uL L U uC C U - -

  20. First-order RC Circuits • Example: to find the transient response after changing circuit when t=0. Solution:

  21. First-order RC Circuits

  22. First-order RC Circuits ——homogeneous solution ——particular solution

  23. homogeneous solution • First-order RC Circuits

  24. First-order RC Circuits • Particular solution Therefore Then, the final solution is

  25. The solution of differential equation • First-order RC Circuits Substituting the initial condition:

  26. The solution of differential equation • First-order RC Circuits ——Time constant ——Steady state value ——Initial value

  27. Solution of other parameters • Three elements method Three elements: 1.steady state value f(∞); 2.time constant τ; 3. initial value f(0+).

  28. Formula of Three element method: 4.3 First-order RL Circuits f(∞)——steady state value f(0+)——initial value τ——time constant τ=RC ——time constant of RC circuit τ= ?? ——time constant of RL circuit

  29. 4.3 First-order RL Circuits

  30. Time constant iL iC + R + R uL L U uC C U - - 4.3 First-order RL Circuits τ=RC τ=L/R

  31. Time constant reflects the length of transient period. • After one time constants, the transient response is equal to 36.8 percent of its initial value. • After about five time constants, the transient response is over.

  32. The curves versus time • Time constant reflects the length of transient period. Mounting curve The initial slop intersects the final value at one time constant. Decaying curve

  33. Three element method • Steps • Initial value: t=0-→t=0+ f(0+) • Steady state value: t =∞ f(∞) • Time constant : τ=RC τ=L/R • Substituting three elements • Draw the curve versus time • Limited Condition: 1) first-order circuit 2) DC source

  34. Example 4.2 Find voltage of v(t) and current i(t) in this circuit for t>0. Answer:

  35. Example 4.3 Find voltage of v(t) and current i(t) in this circuit for t>0. Answer:

  36. Exercise 4.5 Find voltage of v(t) and current iR(t) , iL(t) in this circuit for t>0, assume that iL(0)=0. Answer:

  37. Exercise 4.5 Find voltage of v(t) and current i(t), v(t) in this circuit for t>0, assume that the switch has been closed for a very long time prior to t=0. Answer:

  38. Homework 4 • P4.8 • P4.18 • P4.26 • P4.30

More Related