1 / 6

PXL Detector Sensor and RDO Review Introduction

PXL Detector Sensor and RDO Review Introduction. Talk Outline. Purpose Charge Agenda. Purpose. Development project for > 5 years CD-2/3 Production Readiness Review estimated for November 2010

tslagle
Download Presentation

PXL Detector Sensor and RDO Review Introduction

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. PXL Detector Sensor and RDO Review Introduction

  2. Talk Outline • Purpose • Charge • Agenda

  3. Purpose • Development project for > 5 years • CD-2/3 Production Readiness Review estimated for • November 2010 • No previous subsystem level focused review, this is a good opportunity for additional design input. • This review is intended to give us feedback on both the state of the subsystem (as it is) and uncover and quantify any design or documentary shortcomings before the CD-2/3 review in time to address them before we enter the DOE review process.

  4. Charge • The scope of the review is the sensor and RDO system for the PXL detector system. • Does the proposed design meet the requirements as stated? • Is the design consistent with good practice and appropriate to the task? • Does the team possess the knowledge and skills to carry out the project? • Is the cost and schedule realistic and appropriate? • Is the documentation adequate to present the design?

  5. Agenda • HFT design (LG) • Sensors (MS) • System Hardware Architecture (LG) • System Firmware and Software Architecture (XS) • Hardware prototyping status (MS) • Firmware and software prototyping status (XS) • Project Status (LG) • There will be discussion sessions on Wednesday afternoon and Thursday morning for clarification and detailed questions.

  6. WBS Structure • 1.2.2 PXL Electronics • 1.2.2.1 Phase-1 Sensor • 1.2.2.1.1 Phase-1 Prototype • 1.2.2.1.2 Phase-1 Production • 1.2.2.2 PXL Sensor • 1.2.2.2.1 PXL Sensor Prototype • 1.2.2.2.2 PXL Sensor Production • 1.2.2.3 Ladder Cable • 1.2.2.3.1 Infrastructure Test Cable • 1.2.2.3.2 Prototype Ladder Cable (FR-4) • 1.2.2.3.3 Ladder Cable (Kapton + Cu conductor) • 1.2.3.3.4 Ladder Cable (Kapton + Al conductor) • 1.2.2.3.5 Ladder Cable PXL Sensor • 1.2.2.4 Phase-1 Ladder Assembly • 1.2.2.4.1 Ladder Mechanical / Electrical Prototypes • 1.2.2.5 Read-out Electronics • 1.2.2.5.1 RDO Board • 1.2.2.5.2 Mass Termination Board • 1.2.2.5.3 RDO PCs • 1.2.2.5.4 Control PC System • 1.2.2.6 PXL Sensor Ladder Production

More Related