Uploaded by thalia

4 SLIDES

211 VIEWS

60LIKES

Understanding 4-Bit Registers in Mano and Kime Sections 5-2, 5-3

DESCRIPTION

Explore the concept of 4-bit registers as detailed in Mano and Kime Sections 5-2 and 5-3. Understand the output, input, delays (delay1, delay2, delay3), clock, and operation of these essential digital components.

Understanding 4-Bit Registers in Mano and Kime Sections 5-2, 5-3

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

Registers Mano and Kime Sections 5-2, 5-3
4-Bit Register

outp inp delay1 delay2 delay3 clk

Registers

Registers. Flip-flops are available in a variety of configurations. A simple one with two independent D flip-flops with clear and preset signals is illustrated on the following slide. Although packaged together, the two flip-flops are unrelated.

625 views • 23 slides

Vocal Registers:

Vocal Registers: . Stephen F. Austin, M.M., Ph.D. Associate Professor of Voice University of North Texas. Vocal Registers… OMG!. Literature is very confusing: little agreement Some historical pedagogical literature offers a practical guide Written before registers were understood

1.2k views • 45 slides

Registers

Registers. Registers like counters are clocked sequential circuits A register is a group of flip-flops. Each flip-flop capable of storing one bit of information An n-bit register consists of n flip-flops capable of storing n bits of information

1.44k views • 45 slides

Registers

Registers. A register is a fast part of a processor that holds data and instructions. Registers work by locating where the instruction was gathered, storing it as the control unit deciphers it, storing while the ALU computes it, and storing the result. System Clock.

467 views • 6 slides

Octave Registers

Octave Registers. Getting Your Musical Bearings. Musical Pitch. Western Music designates 12 distinct pitches within an octave (when we arrive at the original pitch at a higher level Pitches are assigned letter names We use clefs to designate placement on the staff for each pitch.

360 views • 6 slides

Renaming registers

Renaming registers. With the Gas style assemblers, you can rename registers to aid in readability. The . req directive can be used to create an alias for a register. Syntax: name . req register_name @ creates an alias for register_name called name Examples:

167 views • 2 slides

Registers

Registers. D Q. D Q. D Q. D Q. D Q. 4. 4. A 4-Bit Register. D3. Q3. CLK. D2. Q2. D. Q. CLK. CLK. D1. Q1. Could be called a parallel-in/parallel-out register. Why?. CLK. D0. Q0. CLK. D Q. D Q. D Q. D Q. A Shift Register. Q3. Q2. Q1. Q0. SerIn.

700 views • 40 slides

Registers

D. D. Q. Q. Registers. Sample data using clock Hold data between clock cycles Computation (and delay) occurs between registers. data in. data out. clock. stable. may change. data in. clock. stable. stable. stable. data out (Q). D. D. Q. Q. T su. T h. input. clock.

578 views • 37 slides

Registers

Registers. Now we’ll see another common sequential device: registers. They’re a good example of sequential analysis and design. They are also frequently used in building larger sequential circuits. Registers hold larger quantities of data than individual flip-flops.

369 views • 17 slides

System Address Registers/Memory Management Registers

System Address Registers/Memory Management Registers. Four memory management registers are used to specify the locations of data structures which control segmented memory management. These registers are: GDTR (Global Descriptor Table Register) IDTR (Interrupt Descriptor Table Register)

565 views • 35 slides

Registers

Registers. The filp-flops are essential component in clocked sequential circuits. Circuits that include filp-flops are usually classified by the function they perform. Two such circuits are registers and counters.

627 views • 18 slides

Language Registers

Language Registers. What is a Register?. describes the various styles of language available for writing or speaking. Language Registers. Every Language has 5 language registers. Deciding which language register is appropriate depends on the:. A udience T opic S ituation.

4.57k views • 23 slides

Registers

A. B. R0. DPTR. DPH. DPL. R1. R2. PC. PC. R3. Some 8051 16-bit Register. R4. R5. R6. R7. Some 8-bit Registers of the 8051 A: Accumulator B: Used specially in MUL/DIV R0-R7: GPRs. Registers. 8051 Programming using Assembly. The MOV Instruction – Addressing Modes.

1.54k views • 121 slides

Registers

Registers. VHDL Tutorial R. E. Haskell and D. M. Hanna T2: Sequential Logic Circuits. An 8-bit register. d(7 downto 0). clr. reg. clk. load. q(7 downto 0). Register entity. Register architecture. architecture reg_arch of reg is begin process (clk, clr) begin

318 views • 9 slides

Registers

Registers. Today we’ll see another common sequential device: registers. They’re a good example of sequential analysis and design. They are also frequently used in building larger sequential circuits. Registers hold larger quantities of data than individual flip-flops.

445 views • 16 slides

Shift Registers

Shift Registers. Shift Registers move data laterally within the register toward its MSB or LSB position In the simplest case, the shift register is simply a set of D flip-flops connected in a row like this: Data input, In, is called a serial input or the shift right input .

1.13k views • 25 slides

Check Registers

SECTION 4-3. pp. 172-174. Check Registers. Figure out: the balance in a check register. Section Objective. Key Words to Know. check register (p. 172) A record you keep of your checking account deposits, withdrawals, and transfers. balance (p. 172)

258 views • 14 slides

Registers

MODULE 4. Registers. SHIFT REGISTERS. Introduction :

692 views • 26 slides

Registers

265 views • 20 slides

Registers

Registers. Register – a collection of binary storage elements In theory, a register is sequential logic which can be defined by a state table More often think of a register as storing a vector of binary values

844 views • 26 slides

Shift Registers

Shift Registers. pp. 353-356. Shift Registers. Capability to shift bits In one or both directions Why? Part of standard CPU instruction set Cheap multiplication Serial communications Just a chain of flip-flops. Simple 4-Bit Shift Register.

1.29k views • 13 slides

Registers

Registers. Overview. Parallel Load Register Shift Registers Serial Load Serial Addition Shift Register with Parallel Load Bidirectional Shift Register VHDL representation of Shift Register. Registers and Counters.

369 views • 17 slides

More Related