1 / 15

Quantitative Estimation of Heat Flux of Atmospheric Pressure Plasma Jet

Quantitative Estimation of Heat Flux of Atmospheric Pressure Plasma Jet. IC-PLANTS 2012 ( 2012/3/ 9 、 Inuyama). Radiation Research Center, Osaka Prefecture University Hiroto Matsuura. Background.

poppy
Download Presentation

Quantitative Estimation of Heat Flux of Atmospheric Pressure Plasma Jet

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Quantitative Estimation of Heat Flux of Atmospheric Pressure Plasma Jet IC-PLANTS 2012 (2012/3/9、Inuyama) Radiation Research Center, Osaka Prefecture University Hiroto Matsuura

  2. Background Atmospheric pressure plasma is now attractive for decontamination of environmental waste and medical technology, because of low cast without vacuum pumping system applicability for biomaterial that does notis less tolerate vacuum large process speed Although many production methods have been proposed, parameters of plasma produced with them are not well studied. Electro static probe method has been widely used for low pressure discharge plasma. And even for Atmospheric pressure plasma, some literature reported its application as following. O.Sakai et al.: J.Phys. D: Appl. Phys, 38, 431(2005). M.R.Talukder et al.: J.Appl.phys., 91, 9529(2002). H.Matsuura, et al.:AIP conf. Proc., 1084, 871(2008). Key issue is the choice of probe tip material which tolerate plasma heat load and analysis of I-V characteristic with collisional sheath effect.

  3. How about heat flux measurement? New J. Phys. 11 (2009) 115012 Are these guys insensitive? http://www.drexel.edu/research/img/mri_plasma.jpg http://www.maximizingprogress.org/2010/02/plasma-medicine-disinfection.html http://www.jsap.or.jp/ap/2008/ob7704/cont7704.html

  4. Atmospheric Pressure Plasma Jet Power supply LHV-13AC(Logy Electric Co.LTD.) Input AC100V/2A Output 10KV/120mA RMS 9～12KHz Size 140×92×175 Weight 1.4kg

  5. Plasma heat flux • Electron positive bias • Ion Negative bias • Metastable atom Atmospheric He/Ar • Radical Atmospheric N2/O2 • Surface recombination • Surface condensation Is it possible to decompose these contribution? with bias? Tip material?

  6. Measurement of target heat flux Material: Cu, Mo Electrically isolated Easy to modify for Q-V characteristic Heat flux determination Type-T TC Temperature gradient method Type-K TC Fitting/cut method

  7. Heat flux measurement

  8. Reduction of TC noise HR2500E Chart During discharge, TC signal shows large fluctuations inspit of large thermal diffusion time. electro-magnetic noise? movement of jet column? Data aqusition with NI9211 and averaging Discharge control( flow, power, distance) Relatively smooth TC signal is obtained.

  9. Estimation of heat flux(Fitting) 12 4 0 dT decay time t is obtained by fitting. Target moved 0.5 0.17 Estimation with exponential fitting Q（~dT/t) = 0.5 [W] Heat flux depends upon measurement position.

  10. Estimation of heat flux(Cut) before after Estimation with discharge cut Q（~jump of dT/dt) = 0.2 [W]

  11. Effect on TC raw data of target bias Al though data is limited and Although data is limited, TC signal seems to depend upon bias voltage applied to target. Although data is limited and At positive bias, traget current becomes negative and TC signal shows large fluctuation. Although discharge itself might be changed with biasing, positive bias seems to reduce heat flux.(Ion, surface reaction?)

  12. Consideration • If heat flux of 0.5W is composited only electron and ion contribution, particle flux ( equivalently 50mA ) must be flowed into the target depending on bias voltage. But by now, such a large current has not been observed. • For previous work on DC discharge, electron saturation current of 1mA was observed with a small probe.

  13. DC atmospheric plasma data With J.S.Chang's procedure, plasma density is about 1e17[m-3] for Ies=1[mA].

  14. Consideration 2 • Heat from atmospheric plasma seems to be carried by mainly metastable or radical.( Different Q-V curve ?) • To confirm this, plasma current must be measured preciously. But, since plasma jet is composed of so many micro plasma bullet, current measurement needs to some integration procedure to compare with heat flux measurement.

  15. Conclusion • Heat flux from atmospheric plasma jet was measured with target TC data and thermal probe analysis, as like as for low pressure plasma. • Considering heat flux value and its response to bias, heat flux contribution from charged particles seems small. • Present plasma jet has smaller density compared with DC discharge.

More Related