1 / 32

The PSEC-3 & PSEC-4 ASICs 5-15 GSa /s waveform sampling/digitizing ICs

The PSEC-3 & PSEC-4 ASICs 5-15 GSa /s waveform sampling/digitizing ICs. Eric Oberla 20-May-2011 LAPPD Electronics + Integration GPC Review. O utline. PSEC series architecture review PSEC-3 --- testing results Submitted 11-Aug-2010, 40 parts received 16-Dec-2010

ossie
Download Presentation

The PSEC-3 & PSEC-4 ASICs 5-15 GSa /s waveform sampling/digitizing ICs

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. The PSEC-3 & PSEC-4 ASICs5-15 GSa/s waveform sampling/digitizing ICs Eric Oberla 20-May-2011 LAPPD Electronics + Integration GPC Review

  2. Outline • PSEC series architecture review • PSEC-3 --- testing results • Submitted 11-Aug-2010, 40 parts received 16-Dec-2010 • PSEC-4 --- design & specifications • Submitted 9-May to MOSIS prototyping run • Plans LAPPD Electronics + Integration GPC review

  3. PSEC series architecture • Waveform sampling using Switched Capacitor Array (SCA) • On-chip digitization up to 12 bits • Serial data readout • Region of interest readout capability • Self-triggering option • Designed to handle fast pulses (MCPs) • Sampling rate capability > 10GSa/s • Analog bandwidth > 1 GHz (challenge!) • Relatively short buffer size • Medium event-rate capability (~100 KHz) • IBM 130 nm CMOS process • Primary front-end chip for LAPPD MCPs LAPPD Electronics + Integration GPC review

  4. PSEC-3 • Design targeted to fix issues with PSEC-2 • Still a prototyping version • 6 channels (2 test + 4 regular) • Test structures on chip • Testing underway December, 2010 4.3mm 4.0mm LAPPD Electronics + Integration GPC review

  5. PSEC-3 specifications + results LAPPD Electronics + Integration GPC review

  6. PSEC-3 die photo Open-cavity ceramic package LAPPD Electronics + Integration GPC review

  7. PSEC-3 Evaluation Card (revA & B) LAPPD Electronics + Integration GPC review

  8. PSEC-3 Evaluation Card (revA & B) USB 2.0 PSEC-3 • FPGA: Altera Cyclone III • Firmware developed at UC • USB readout software joint UH/UC effort LAPPD Electronics + Integration GPC review

  9. PSEC-3 Sampling Rate • Sampling rates adjustable 2.5 – 17 GSa/s • Currently running at 10 GS/s, sampling lock with on-chip Delay-Locked Loop (DLL) • Good agreement with data +post-layout simulation LAPPD Electronics + Integration GPC review

  10. PSEC-3 Sample Lock • Custom delay locked loop (DLL) design • Works great, except for some issues of de-locking when ADC is running • Attributed to drop in rail voltage/digital noise ---> issues addressed in PSEC-4 • Video: LAPPD Electronics + Integration GPC review

  11. PSEC-3 ADC performance • Wilkinson ADC runs successfully to 2GHz (registers can be clocked to 3GHz) • Firmware has ADC running in ~10 bit mode: • 700 ns conversion (ramp ->0-1V) @ 1.6 GHz A/D conversion main power consumer in PSEC-3 – ~15 mW per channel (only ON during 700 ns ADC period) • Test structure (counter + ring oscillator) • Channel clock fan-out LAPPD Electronics + Integration GPC review

  12. PSEC-3 Linearity & Dynamic Range • Channel 3Channel 4 • Fine DC scan + fit in linear region to get voltage/count conversion • Blue data points are raw data, without correction • Very linear in 450-900 mV range • Deviation < 400mV not fully understood (possibly due to comparator/buffer response or transistor Vthresh) LAPPD Electronics + Integration GPC review

  13. PSEC-3 Linearity & Dynamic Range • Channel 3Channel 4 • Plot of fit residuals + cubic spline interpolation • Create look up table (LUT) to correct for ADC differential non-linearity • Currently, a software correction – work with Andrew Wong (UHawaii) • In linear region, ΔV < 1 LSB  no (very few) missing codes LAPPD Electronics + Integration GPC review

  14. PSEC-3 Noise NOISE CHANNELS 1-4 • Input noise ranges ~1-1.5 mV RMS • Dominant source of on-chip noise comes from analog buffers  Issue addressed in PSEC-4 design LAPPD Electronics + Integration GPC review

  15. PSEC-3 Noise <noise plots PSEC-3 simulation to compare> LAPPD Electronics + Integration GPC review

  16. PSEC-3 AC performance • Analog Bandwidth • Timing Calibrations – save for Kurtis’ talk • 80 MHz sine wave @ 10GSa/s • (time-base not calibrated) LAPPD Electronics + Integration GPC review

  17. PSEC-3 Analog Bandwidth • Quantify observation of attenuation along chip input line • -High series R of line (~160ohm) --- bad! • Histogram random phase sine waves – get amplitude along line Example (400MHz): Overlay sine data on 256 cells ------------> From histograms, amplitudes compared for 3 groups of cells: 1-5 61-65 141-145 LAPPD Electronics + Integration GPC review

  18. More examples: (CW from top left 100MHz, 400 MHz, 1.2 GHz, 700MHz) LAPPD Electronics + Integration GPC review

  19. PSEC-3 Analog Bandwidth HerveGrabas • Time-domain reflectrometery (TDR) of PSEC-3 input -> input line is much too capacitive ~11pF! (>> 2pF expected from post-layout extraction) • - suspected culprits: coupling to subtrate/top layer fill metal LAPPD Electronics + Integration GPC review

  20. PSEC-3 Analog Bandwidth • Bandwidth highly dependent on location along input line: • First 5 cells have -3dB ~1.3 GHz (excluding 800MHz region) • Need to take more data to confirm trend 600-900 MHz • Reducing input line resistance should extend 1.3 GHz BW to later cells –> PSEC-4 • -- Careful layout to reduce input capacitance –> PSEC-4 LAPPD Electronics + Integration GPC review

  21. PSEC-3 summary • PSEC-3 = working waveform sampling ASIC • Room for improvement: • ABW • Dynamic flip-flops proven difficult in ADC design • Overall readout speed • Fixes covered in careful redesign -> PSEC-4 • Still to characterize: • Timing calibrations -> timing measurements (resolution, jitter, etc.) • Temperature dependence • Up next: • Readout a detector! LAPPD Electronics + Integration GPC review

  22. PSEC-4 • Design targeted to fix issues with PSEC-3 • 6 identical channels • each 256 samples deep • Submitted to MOSIS 9-May 2011 • 40 parts • May get a larger run via CERN MPW if necessary LAPPD Electronics + Integration GPC review

  23. PSEC-4 specifications • Red = redesigned using what we learned from PSEC-3 • - Overall architecture the same: only small, necessary improvements made from PSEC-3 design (= confidence in design) LAPPD Electronics + Integration GPC review

  24. PSEC-4 noise reduction • Comparator dominant noise source in redesign • Analog buffer removed • Replaced with effective buffering input stage to comparator (compact, low noise design) • In addition, noisy ramp analog buffer deemed unnecessary and removed • (after much simulation to convince ourselves) • Learned much regarding analog design from Eric Delagnes and others at the recent UChicago workshop <noise plot PSEC-4> LAPPD Electronics + Integration GPC review

  25. PSEC-4 ABW improvement • Move input line to top layer metal (R ~ 5 ohms) • Factor of 30 reduction in resistance • PSEC-3 used MQ • PSEC-4 input line in microstrip configuration • PSEC-3 uses balanced, coplanar line • Change to unbalanced line -> less sensitive to distortion + easier to control impedance + less coupling to substrate! (=less parasitic capacitance) • ABW ~1.5 GHz seen by first cells in PSEC-3 should extend to all cells in PSEC-4 IBM 130nm 8RF-DM layer resistivity -----> HerveGrabas LAPPD Electronics + Integration GPC review

  26. PSEC-4 ADC improvement • Change fast, dynamic flip flop + latch configuration in ADC counter with storage d-flip flop • Lose encoding capability > 2 GHz, but OK • Overall architecture unchanged • 12 bit +1 bit overcount with cell-addressed tri-state drivers on each for readout. • Simulation: Transfer Encoding @ 2 GHz Storing digital values (~10 us) Readout LAPPD Electronics + Integration GPC review

  27. PSEC-3 & PSEC-4 plans • Parallel work on both chips • PSEC-3: • Continue characterizing PSEC-3 – work with Kurtis on time calibrations • Timing measurements! • Detector readout (later talk for details/opportunities) • PSEC-4: • Design of evaluation board (possibly using existing revA digital card) • Much of PSEC-3 firmware will transfer • Characterization (expect chip ~August) • PSEC-4 is baseline ASIC for LAPPD readout. • PSEC-3 is working 4-channel prototype and will be used extensively in meantime LAPPD Electronics + Integration GPC review

  28. BACKUP LAPPD Electronics + Integration GPC review

  29. PSEC architecture – timing generation Phase Compa-rator Charge pump • 256 Delay units – starved current inverter chain -----------> • Sampling window strobe (8x delay) sent to each channel’s SCA • On chip phase comparator + charge pump for sample lock LAPPD Electronics + Integration GPC review

  30. PSEC architecture -- sampling LAPPD Electronics + Integration GPC review

  31. PSEC architecture – ADC + readout Level from sampling cell Comp. Clk enable Read enable fast 12 bit register 2-2.5 GHz Ring Oscillator 12 bit data bus Ramping circuit Readout shift register/ one-shot: “Token” … 256x … LAPPD Electronics + Integration GPC review

  32. Bandwidth with gain=2 amplifier • Comments: • On-board amplifier (channel 4) unstable with unity gain – works with gain=2 • -3dB BW ~700 MHz for first cells • Amplifier = THS4304 LAPPD Electronics + Integration GPC review

More Related