1 / 8

第二部分 IMD(In-Mold Decoration) ( 模內射出裝飾 )

第二部分 IMD(In-Mold Decoration) ( 模內射出裝飾 ). 所謂 IMD 即為模內射出裝飾之統稱,目前依製程不同可分為 IMF 及 IML 兩種,其概要程序如下: 薄膜印刷 ( IMF, IMR) 高壓真空成型 ( IMF) 精密3 D 裁切加工 ( IMF) 薄膜射出成型加工( IMF, IMR). IMF (In-Mold by Film). 此製程是先將油墨印刷在一層厚度約0.18 m/m 的 Film 上(材質為 PC 或 PET), 經過 forming 之後,於射出機台上,靠著模具定位機構定位,在模內與基材一同成型。.

nash
Download Presentation

第二部分 IMD(In-Mold Decoration) ( 模內射出裝飾 )

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. 第二部分 IMD(In-Mold Decoration) (模內射出裝飾) 所謂IMD即為模內射出裝飾之統稱,目前依製程不同可分為IMF及IML兩種,其概要程序如下: • 薄膜印刷 (IMF, IMR) • 高壓真空成型 (IMF) • 精密3D裁切加工 (IMF) • 薄膜射出成型加工(IMF, IMR)

  2. IMF (In-Mold by Film) 此製程是先將油墨印刷在一層厚度約0.18 m/m的Film上(材質為PC或PET),經過forming之後,於射出機台上,靠著模具定位機構定位,在模內與基材一同成型。

  3. Laminate Hard Coat Polycarbonate IMF 成形步驟 (一) Laminate Remove 2nd surface laminate

  4. IMF 成形步驟 (二) IMD Film Print graphics inks & dry thoroughly

  5. IMF 成形步驟 (三) IMD Film Remove 1st surface laminate

  6. HOT AIR HOT AIR HOT AIR IMF 成形步驟 (四) Forming - Niebling

  7. IMF 成形步驟 (五) Vacuum Vacuum Forming - Thermoforming

  8. IMF 成形步驟 (六) (Optional) UV Light UV Curing • After curing the hard coat surface is scratch resistant

More Related