1 / 10

Experiment

Experiment. Previous expreiment. “Molar ratio of spin-coated precursors must be matched precisely” Zinc acetate (2 acetic group) : Tin tert-butoxide (4 butoxyl group) = 2 : 1. Ratio < 2:1. Zinc precursor. Zinc tin oxide + Tin tert -butoxide. Tin precursor. Substrate. Substrate.

mora
Download Presentation

Experiment

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Experiment Previous expreiment “Molar ratio of spin-coated precursors must be matched precisely” Zinc acetate (2 acetic group) : Tin tert-butoxide (4 butoxyl group) = 2 : 1 Ratio < 2:1 Zinc precursor Zinc tin oxide + Tin tert-butoxide Tin precursor Substrate Substrate Negative Vth, high off-current

  2. Experiment Reduction of Sn precursor thickness 0.1M Tin butoxide 0.05M Tin butoxide 0.025M Tin butoxide 4000RPM 10-12A off current 6000RPM

  3. Experiment Reduction of Zn precursor thickness ZnOAc 6000RPM ZnOAc 2000RPM Vth negative shift : Increased Sn/Zn+Sn ratio

  4. Experiment Air annealing – effective than annealing in dry glovebox drybox 6hrs annealing Air 3hrs Glovebox: No oxygen, solvent vapor, etc.

  5. Experiment Wet annealing – not very effective wet 3hrs Dry 2hrs + Wet 4hrs Designed process was non-hydrolytic – hydrolysis has to be avoided

  6. Experiment Increasing Zn precursor thickness (0.3M zinc acetate solution) Leakage current (not p-type conductivity) Poor TFT characteristics – Acetate:Tert-butoxide >> 2:1 (Unbalanced)

  7. Experiment Optimum Zn:Sn ratio ~ 1 : 1 In previous experiment, optimum ration was, Zinc acetate (2 acetic group) : Tin tert-butoxide (4 butoxyl group) = 2 : 1 Too obtain optimum Zn:Sn ratio, New precursor stack design Zinc acetate + Tin acetate (3:1) Tin tert-butoxide Substrate # of Acetic group : # of butoxyl group = 1:1 (For complete reaction) Zn:Sn = 1:1 (For electrical characteristic)

  8. Experiment Zn acetate + Sn acetate solution 8:1 4:1 2:1 By poor solubility of Sn acetate

  9. Experiment 300°C, 2hr 300°C, 2.5hr 300°C, 1hr

  10. 250°C, 1hr 270°C, 1hr 300°C, 1hr 330°C, 1hr

More Related