1 / 4

FANUC

FANUC. 10M. ACTUAL POSITION. O0001 N00020. (ABSOLUTE). X 00.0000 Y 00.0000 Z 00.0000. 0 (IN/MIN). S: 0 (RPM). ACT. F:. MDI HND HOLD **** *** *** *** ****. +. POSITION. PROGRAM. OFFSET. PRG_CHK. FANUC. 10M. PROGRAM (MEMORY).

Download Presentation

FANUC

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. FANUC 10M ACTUAL POSITION O0001 N00020 (ABSOLUTE) X 00.0000Y 00.0000Z 00.0000 0 (IN/MIN) S: 0 (RPM) ACT. F: MDI HND HOLD **** *** *** *** **** + POSITION PROGRAM OFFSET PRG_CHK

  2. FANUC 10M PROGRAM (MEMORY) O0040 N00000 (HOUSING 1ST OP); O0040 (Flange First Op) N005 T01 M06;N010 G54 G90 S500 M03 T02N015 G00 X3.5 Y2.5;N020 G43 H01 Z.1;N025 M08N030 G01 Z-.75 F4.5N035 G00 Z.1 M09N040 G91 G28 Z0 M19; EDIT *** STOP **** *** *** *** *** **** + POSITION PROGRAM OFFSET PRG_CHK

  3. FANUC 10M TOOL OFFSET O0040 N00000 DATA DATA NO. NO. 001002003004005006007008009010 00.000000.000000.000000.000000.000000.000000.000000.000000.000000.0000 00.000000.000000.000000.000000.000000.000000.000000.000000.000000.0000 011012013014015016017018019020 EDIT *** STOP **** *** *** *** *** **** + + + + POSITION POSITION POSITION POSITION PROGRAM PROGRAM PROGRAM PROGRAM OFFSET OFFSET OFFSET OFFSET PRG_CHK PRG_CHK PRG_CHK PRG_CHK

  4. FANUC 10M (PROGRAM) O0040 N00050 N045 G00 X2.0 Y1.; N050 G01 Z-1. F3.5; > N055 G00 Z.1; N060 G91 G28 Z0 M19 (G/D/H) (M) (RELATIVE) X5.0234 Y4.3653 Z2.3223 (DIST TO GO)X00.0000Y00.0000Z-0.2332 M03M08 G01 G20G54 G23G90 G80G40 (F) 23.2 (ACT. F)(S) 543.0 (ACT. S) MEM *** HOLD **** *** *** *** *** **** + POSITION PROGRAM OFFSET PRG_CHK

More Related