1 / 8

MOSFET Piecewise Models

MOSFET Piecewise Models. ECE 2204. Cut-off Region. I G = I D = I S = 0. NMOS PMOS. V GS ≤ V TN V GS ≥ V TP. Nonsaturation /Triode Region. I G = 0 I D ≤ I Dsat. NMOS PMOS. V GS ≥ V TN V DS ≤ V GS – V TN V GS ≤ V TP V DS ≥ V GS - V TP

kyrene
Download Presentation

MOSFET Piecewise Models

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. MOSFET Piecewise Models ECE 2204

  2. Cut-off Region IG = ID= IS = 0 NMOS PMOS VGS ≤ VTN VGS≥ VTP

  3. Nonsaturation/Triode Region IG = 0ID ≤ IDsat NMOS PMOS VGS ≥ VTN VDS ≤ VGS – VTN VGS≤ VTP VDS ≥ VGS - VTP ID= Kn[(VGS – VTN)VDS – 0.5VDS2] ID= Kp[(VGS - VTN)VDS – 0.5VDS2] RDSon= VDS/IDRDSon= VDS/ID

  4. Saturation/Pinch-off Region IG = 0, ID = IDsat (a constant) NMOS PMOS VGS ≥ VTN VDS ≥ VDSsatVGS≤ VTPVDS≤ VDSsat VDSsat= VGS – VTNVDSsat= VGS - VTP ID= (Kn/2)(VGS – VTN)2 = (Kn/2)VDSsat2 ID= (Kp/2)(VGS - VTP)2 = (Kp/2)VDSsat2

  5. Summary of I-V Relationships:Enhancement Mode FETs

  6. Transition between models • NMOS enhancement mode • Cut-off and Saturation/Pinch-of • Nonsaturation/Triode and Saturation/Pinch-off • PMOS enhancement mode • Cut-off and Saturation/Pinch-of • Nonsaturation/Triode and Saturation/Pinch-off

  7. Conduction Parameters • NMOSFET • PMOSFET where:

  8. Questions • How does VTN or VTP change with the doping concentration of the channel? • To limit the power dissipated in a FET operating in the triode region, RDSon should be as small as possible. Should VGS be large or small? • If the oxide is changed to a high K dielectric, will ID increase or decrease? To keep the drain current unchanged, should the thickness of the oxide increase or decrease? • If you fabricated a NMOS transistor in Si and GaAs with the same doping concentrations, dimensions, and same oxide material), will ID(GasAs) be larger or smaller than ID(GasAs) when VDS = VGS – VTN?

More Related