1 / 149

Topic 8 Complementary MOS (CMOS) Logic Design

ECE 271 Electronic Circuits I. Topic 8 Complementary MOS (CMOS) Logic Design. Chapter Goals. Introduce CMOS logic concepts Explore the voltage transfer characteristics of CMOS inverters Learn to design basic and complex CMOS logic gates Discuss the static and dynamic power in CMOS logic

rgoulet
Download Presentation

Topic 8 Complementary MOS (CMOS) Logic Design

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. ECE 271 Electronic Circuits I Topic 8Complementary MOS (CMOS) Logic Design NJIT ECE 271 Dr, Serhiy Levkov

  2. Chapter Goals • Introduce CMOS logic concepts • Explore the voltage transfer characteristics of CMOS inverters • Learn to design basic and complex CMOS logic gates • Discuss the static and dynamic power in CMOS logic • Present expressions for dynamic performance of CMOS logic devices • Present noise margins for CMOS logic • Introduce design techniques for “cascade buffers” NJIT ECE 271 Dr, Serhiy Levkov

  3. CMOS Inverter Technology • Complementary MOS, or CMOS, needs both PMOS and NMOS devices for the logic gates to be realized • The concept of CMOS was introduced in 1963 by Wanlass and Sah. • CMOS are more complicated in design and production, thus are more expensive to fabricate • Have not been widely used until the 1980’s as NMOS microprocessors started to dissipating as much as 50 W and more and alternative design technique was needed • CMOS dominate digital IC design today NJIT ECE 271 Dr, Serhiy Levkov

  4. CMOS Inverter • Circuit schematic for a CMOS inverter • Simplified operation model with a high input applied • Simplified operation model with a low input applied NJIT ECE 271 Dr, Serhiy Levkov

  5. CMOS Inverter • Circuit schematic for a CMOS inverter • Simplified operation model with a high input applied • Simplified operation model with a low input applied • When vI is pulled high (to VDD), the PMOS transistor is turned off, while the NMOS device is turned on pulling the output down to VSS NJIT ECE 271 Dr, Serhiy Levkov

  6. CMOS Inverter • Circuit schematic for a CMOS inverter • Simplified operation model with a high input applied • Simplified operation model with a low input applied • When vI is pulled high (to VDD), the PMOS transistor is turned off, while the NMOS device is turned on pulling the output down to VSS • When vI is pulled low (to VSS), the NMOS transistor is turned off, while the PMOS device is turned on pulling the output up to VDD NJIT ECE 271 Dr, Serhiy Levkov

  7. CMOS Inverter Technology • The CMOS inverter consists of a PMOS device stacked on top on an NMOS device, but they need to be fabricated on the same wafer • To accomplish this, the technique of “n-well” implantation is needed as shown in this cross-section of a CMOS inverter NJIT ECE 271 Dr, Serhiy Levkov

  8. NMOS and PMOS recap NJIT ECE 271 Dr, Serhiy Levkov

  9. NMOS and PMOS recap NJIT ECE 271 Dr, Serhiy Levkov

  10. NMOS and PMOS recap NJIT ECE 271 Dr, Serhiy Levkov

  11. NMOS and PMOS recap NJIT ECE 271 Dr, Serhiy Levkov

  12. NMOS and PMOS recap NJIT ECE 271 Dr, Serhiy Levkov

  13. NMOS and PMOS recap NJIT ECE 271 Dr, Serhiy Levkov

  14. NMOS and PMOS recap NJIT ECE 271 Dr, Serhiy Levkov

  15. NMOS and PMOS recap NJIT ECE 271 Dr, Serhiy Levkov

  16. NMOS and PMOS recap NJIT ECE 271 Dr, Serhiy Levkov

  17. NMOS and PMOS recap NJIT ECE 271 Dr, Serhiy Levkov

  18. NMOS and PMOS recap NJIT ECE 271 Dr, Serhiy Levkov

  19. Static States of the CMOS Inverter • The capacitor discharges through RonN , current exists only during discharge, no dc current exists. NJIT ECE 271 Dr, Serhiy Levkov

  20. Static States of the CMOS Inverter • The capacitor discharges through RonN , current exists only during discharge, no dc current exists. NJIT ECE 271 Dr, Serhiy Levkov

  21. Static States of the CMOS Inverter • The capacitor discharges through RonN , current exists only during discharge, no dc current exists. NJIT ECE 271 Dr, Serhiy Levkov

  22. Static States of the CMOS Inverter • The capacitor discharges through RonN , current exists only during discharge, no dc current exists. NJIT ECE 271 Dr, Serhiy Levkov

  23. Static States of the CMOS Inverter • The capacitor discharges through RonN , current exists only during discharge, no dc current exists. NJIT ECE 271 Dr, Serhiy Levkov

  24. Static States of the CMOS Inverter • The capacitor discharges through RonN , current exists only during discharge, no dc current exists. NJIT ECE 271 Dr, Serhiy Levkov

  25. Static States of the CMOS Inverter • The capacitor discharges through RonN , current exists only during discharge, no dc current exists. NJIT ECE 271 Dr, Serhiy Levkov

  26. Static States of the CMOS Inverter • The capacitor discharges through RonN , current exists only during discharge, no dc current exists. NJIT ECE 271 Dr, Serhiy Levkov

  27. Static States of the CMOS Inverter • The capacitor discharges through RonN , current exists only during discharge, no dc current exists. NJIT ECE 271 Dr, Serhiy Levkov

  28. Static Characteristics of the CMOS Inverter • The capacitor discharges through RonN , current exists only during discharge, no dc current exists. • The capacitor charges through RonP , current exists only during charging, no dc current exists. NJIT ECE 271 Dr, Serhiy Levkov

  29. Static Characteristics of the CMOS Inverter • The capacitor discharges through RonN , current exists only during discharge, no dc current exists. • The capacitor charges through RonP , current exists only during charging, no dc current exists. NJIT ECE 271 Dr, Serhiy Levkov

  30. Static Characteristics of the CMOS Inverter • The capacitor discharges through RonN , current exists only during discharge, no dc current exists. • The capacitor charges through RonP , current exists only during charging, no dc current exists. NJIT ECE 271 Dr, Serhiy Levkov

  31. Static Characteristics of the CMOS Inverter • The capacitor discharges through RonN , current exists only during discharge, no dc current exists. • The capacitor charges through RonP , current exists only during charging, no dc current exists. NJIT ECE 271 Dr, Serhiy Levkov

  32. Static Characteristics of the CMOS Inverter • The capacitor discharges through RonN , current exists only during discharge, no dc current exists. • The capacitor charges through RonP , current exists only during charging, no dc current exists. NJIT ECE 271 Dr, Serhiy Levkov

  33. Static Characteristics of the CMOS Inverter • The capacitor discharges through RonN , current exists only during discharge, no dc current exists. • The capacitor charges through RonP , current exists only during charging, no dc current exists. NJIT ECE 271 Dr, Serhiy Levkov

  34. Static Characteristics of the CMOS Inverter • The capacitor discharges through RonN , current exists only during discharge, no dc current exists. • The capacitor charges through RonP , current exists only during charging, no dc current exists. NJIT ECE 271 Dr, Serhiy Levkov

  35. Static Characteristics of the CMOS Inverter • The capacitor discharges through RonN , current exists only during discharge, no dc current exists. • The capacitor charges through RonP , current exists only during charging, no dc current exists. NJIT ECE 271 Dr, Serhiy Levkov

  36. Static Characteristics of the CMOS Inverter • The capacitor discharges through RonN , current exists only during discharge, no dc current exists. • The capacitor charges through RonP , current exists only during charging, no dc current exists. NJIT ECE 271 Dr, Serhiy Levkov

  37. CMOS Inverter – building VTC • To better understand what’s happening in inverter and to get the complete model we need to build the VTC - voltage transfer characteristics. NJIT ECE 271 Dr, Serhiy Levkov

  38. CMOS Inverter – building VTC • To better understand what’s happening in inverter and to get the complete model we need to build the VTC - voltage transfer characteristics. • To construct VTC we use the load line method for different load states. NJIT ECE 271 Dr, Serhiy Levkov

  39. CMOS Inverter – building VTC • To better understand what’s happening in inverter and to get the complete model we need to build the VTC - voltage transfer characteristics. • To construct VTC we use the load line method for different load states. • However, since the load in this case is also a nonlinear transistor, the “load line” approach will consist of superimposing I-Vcharacteristics of NMOS and PMOS transistors. NJIT ECE 271 Dr, Serhiy Levkov

  40. CMOS Inverter – building VTC • To better understand what’s happening in inverter and to get the complete model we need to build the VTC - voltage transfer characteristics. • To construct VTC we use the load line method for different load states. • However, since the load in this case is also a nonlinear transistor, the “load line” approach will consist of superimposing I-Vcharacteristics of NMOS and PMOS transistors. • It requires that the I-V curves of the NMOS and PMOS devices are transformed onto a common coordinate set. NJIT ECE 271 Dr, Serhiy Levkov

  41. CMOS Inverter – building VTC • To better understand what’s happening in inverter and to get the complete model we need to build the VTC - voltage transfer characteristics. • To construct VTC we use the load line method for different load states. • However, since the load in this case is also a nonlinear transistor, the “load line” approach will consist of superimposing I-Vcharacteristics of NMOS and PMOS transistors. • It requires that the I-V curves of the NMOS and PMOS devices are transformed onto a common coordinate set. • We select the input voltage VI NJIT ECE 271 Dr, Serhiy Levkov

  42. CMOS Inverter – building VTC • To better understand what’s happening in inverter and to get the complete model we need to build the VTC - voltage transfer characteristics. • To construct VTC we use the load line method for different load states. • However, since the load in this case is also a nonlinear transistor, the “load line” approach will consist of superimposing I-Vcharacteristics of NMOS and PMOS transistors. • It requires that the I-V curves of the NMOS and PMOS devices are transformed onto a common coordinate set. • We select the input voltage VI, the output voltage VO NJIT ECE 271 Dr, Serhiy Levkov

  43. CMOS Inverter – building VTC • To better understand what’s happening in inverter and to get the complete model we need to build the VTC - voltage transfer characteristics. • To construct VTC we use the load line method for different load states. • However, since the load in this case is also a nonlinear transistor, the “load line” approach will consist of superimposing I-Vcharacteristics of NMOS and PMOS transistors. • It requires that the I-V curves of the NMOS and PMOS devices are transformed onto a common coordinate set. • We select the input voltage VI, the output voltage VO , and the NMOS drain current IDNas the variables of choice. NJIT ECE 271 Dr, Serhiy Levkov

  44. CMOS Inverter – building VTC • To better understand what’s happening in inverter and to get the complete model we need to build the VTC - voltage transfer characteristics. • To construct VTC we use the load line method for different load states. • However, since the load in this case is also a nonlinear transistor, the “load line” approach will consist of superimposing I-Vcharacteristics of NMOS and PMOS transistors. • It requires that the I-V curves of the NMOS and PMOS devices are transformed onto a common coordinate set. • We select the input voltage VI, the output voltage VO , and the NMOS drain current IDSNas the variables of choice. • The PMOS I-Vrelationship can be transformed as follows: • IDSp = –IDSn • VGSn = VI ; VGSp= VI – VDD • VDSn = VO ; VDSp= VO – VDD NJIT ECE 271 Dr, Serhiy Levkov

  45. CMOS Inverter – building VTC • The I-Vcurves for NMOS are already plotted in the selected coordinate set Vin, Vout and IDN, so no change is needed. NJIT ECE 271 Dr, Serhiy Levkov

  46. CMOS Inverter – building VTC • The I-Vcurves for NMOS are already plotted in the selected coordinate set Vin, Vout and IDN, so no change is needed. • The load-line curves of the PMOS device are obtained by a mirroring around the x-axisand a horizontal shift over VDD. NJIT ECE 271 Dr, Serhiy Levkov

  47. CMOS Inverter – building VTC • The I-V curves for NMOS are already plotted in the selected coordinate set Vin, Vout and IDN, so no change is needed. • The load-line curves of the PMOS device are obtained by a mirroring around the x-axisand a horizontal shift over VDD. • This procedure is outlined below, where the subsequent steps to adjust the original PMOS I-V curves to the common coordinate set Vin, Vout and IDn are illustrated (in this example VDD = 2.5V. NJIT ECE 271 Dr, Serhiy Levkov

  48. CMOS Inverter – building VTC • The I-V curves for NMOS are already plotted in the selected coordinate set Vin, Vout and IDN, so no change is needed. • The load-line curves of the PMOS device are obtained by a mirroring around the x-axisand a horizontal shift over VDD. • This procedure is outlined below, where the subsequent steps to adjust the original PMOS I-V curves to the common coordinate set Vin, Vout and IDn are illustrated (in this example VDD = 2.5V. NJIT ECE 271 Dr, Serhiy Levkov

  49. CMOS Inverter – building VTC • Now we can superimpose the load curves of the PMOS on the IV curves of the NMOS. • For a dc operating points to be valid, the currents through the NMOS and PMOS devices must be equal. Graphically, this means that the dc points must be located at the intersection of corresponding load lines. • Some of those points (for Vin = 0, 0.5, 1, 1.5, 2, and 2.5 V) are marked on the graph. NJIT ECE 271 Dr, Serhiy Levkov

  50. CMOS Inverter – building VTC • All operating points are located either at the high or low output levels. • The VTC of the inverter hence exhibits a very narrow transition zone. • This results from the high gain during the switching transient, when both NMOS and PMOS are simultaneously on, and in saturation. • In that operation region, a small change in the input voltage results in a large output variation. NJIT ECE 271 Dr, Serhiy Levkov

More Related