1 / 22

How to create Nitrate Leaching Potential ( WA) Maps and Reports from Web Soil Survey

How to create Nitrate Leaching Potential ( WA) Maps and Reports from Web Soil Survey. http://websoilsurvey.nrcs.usda.gov/app/. Contact: Brad Duncan Assistant State Soil Scientist Spokane NRCS State Office Brad.Duncan@wa.usda.gov 509-323-2982.

major
Download Presentation

How to create Nitrate Leaching Potential ( WA) Maps and Reports from Web Soil Survey

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. How to create Nitrate Leaching Potential (WA) Maps and Reports from Web Soil Survey http://websoilsurvey.nrcs.usda.gov/app/ Contact: Brad Duncan Assistant State Soil Scientist Spokane NRCS State Office Brad.Duncan@wa.usda.gov 509-323-2982

  2. The are two Nitrate Leaching Potential Interpretations that were developed for Washington. One is used for the Irrigated condition, and the other for the Nonirrigated condition. Please review the document here that explains the soil and climatic factors used to developed the interpretations

  3. 5. Slope gradient adjusted for hydrologic soil group - the steeper the slope gradient, the higher the potential surface runoff, resulting in less water available to move through the soil profile. The following adjustments are made to the slope gradient by hydrologic group to account for potential surface runoff differences: Hydrologic group A - slope % x 0.75 Hydrologic group B - slope % x 0.85 Hydrologic group C - slope % x 0.95 Hydrologic group D - no adjustment The ratings are both verbal and numerical. The ratings for Nitrate Leaching Potential, Nonirrigated are calculated as follows: 1. The Mean Annual Precipitation minus Potential Evapotranspiration subrule is weighted by multiplying by 0.60. 2. The Water Travel Time subrule is weighted by multiplying by 0.25. 3. The Available Water Capacity subrule is weighted by multiplying by 0.15. 4 The sum of these three weighted subrules results in a value between 0.00 and 1.00. 5. Adjustments are then made for water table depth and duration, and slope gradient adjusted for hydrologic group. The sum of the values from these subrules is subtracted from the sum in step 4 above. The maximum reduction is 0.50 for the water table index subrule, and 0.30 for the slope gradient subrule. The ratings for the Nitrate Leaching Potential, Irrigated interpretation are calculated with different weighting factors than those above for the nonirrigated interpretation. The following Nitrate Leaching Potential, Nonirrigated rating classes are assigned based on the final calculation from the factors above: Low: 0.00 - 0.25 Moderate: 0.26 - 0.50 Moderately high: 0.51 - 0.75 High: 0.76 - 1.00 The ratings indicate the potential for nitrate leaching below the root zone, based on inherent soil and climate properties. A “Low” rating indicates a low potential for nitrates to leach below the root zone. A “High” rating indicates a high potential for nitrates to leach below the root zone. The “Moderate” and “Moderately high” rating indicate intermediate potentials. The map unit components listed for each map unit in the accompanying Summary by Map Unit table in Web Soil Survey or the Aggregation Report in Soil Data Viewer are determined by the aggregation method chosen. An aggregated rating class is shown for each map unit. The components listed for each map unit are only those that have the same rating class as listed for the map unit. The percent composition of each component in a particular map unit is presented to help the user better understand the percentage of each map unit that has the rating presented. Other components with different ratings may be present in each map unit. The ratings for all components, regardless of the map unit aggregated rating, can be viewed by generating the equivalent report from the Soil Reports tab in Web Soil Survey or from the Soil Data Mart site. Onsite investigation may be needed to validate these interpretations and to confirm the identity of the soil on a given site.

  4. AGR - Nitrate Leaching Potential, Irrigated (WA) This interpretation is designed to evaluate the potential for nitrate-nitrogen to be transmitted through the soil profile below the root zone by percolating water under irrigated conditions. Leaching nitrates have the potential to contaminate shallow and deep aquifers used for drinking water. The ratings are based on inherent soil and climate properties that affect nitrate leaching, and do not account for management practices such as nitrogen fertilizer application rates and timing, crop rotation, and irrigation water management. The following soil and climate factors are used in the interpretation criteria: 1. Mean annual precipitation minus potential evapotranspiration - this factor provides an estimate of the amount of water that is available to move through the soil profile on an annual basis from precipitation. Potential evaporation is estimated from mean annual air temperature, using an algorithm developed by the National Soil Survey Center, using the Hamon potential evapotranspiration method. 2. Water travel time through the entire soil profile - this factor uses the saturated hydraulic conductivity (Ksat) and thickness of each soil horizon, to estimate the number of hours that would be required for a given volume of water to move through the entire soil profile. One advantage of this method for accounting for the rate of water movement is that the properties and thickness of each soil horizon are accounted for, rather than using an average saturated hydraulic conductivity for the entire profile. This method accounts for subtle differences between soils in texture, structure, horizon thickness, and depth to water-restricting layers. 3. Available water capacity - this factor accounts for the cumulative amount of water available to plants that the entire soil profile can hold at field capacity to a depth of 150 cm. The more water the soil profile can hold, the less water is available for deep leaching. 4. Depth and duration of water table - this factor uses a water table index based on the minimum average depth to a water table, and the number of months that the water table is present during the months of April through October. It is used to account for the loss of nitrates to the atmosphere as nitrous oxide or nitrogen gas due to denitrification under anaerobic conditions caused by water saturation. The higher the water table and the longer it’s duration, the larger the quantity of nitrates that would potentially be lost to the atmosphere, and therefore not be available for deep leaching. 5. Slope gradient adjusted for hydrologic soil group - the steeper the slope gradient, the higher the potential surface runoff, resulting in less water available to move through the soil profile. The following adjustments are made to the slope gradient by hydrologic group to account for potential surface runoff differences: Hydrologic group A - slope % x 0.75 Hydrologic group B - slope % x 0.85 Hydrologic group C - slope % x 0.95 Hydrologic group D - no adjustment

  5. The ratings are both verbal and numerical. The ratings for Nitrate Leaching Potential, Irrigated are calculated as follows: 1. The Water Travel Time subrule is weighted by multiplying by 0.60. 2. The Available Water Capacity subrule is weighted by multiplying by 0.40. 3. The sum of these two weighted subrules results in a value between 0.00 and 1.00 4. Adjustments are then made for water table depth and duration, and slope gradient adjusted for hydrologic group. The sum of the values from these subrules is subtracted from the sum in step 3 above. The maximum reduction is 0.50 for the water table index subrule, and 0.30 for the slope gradient subrule. 5. A final positive adjustment is made for the Mean Annual Precipitation minus Potential Evapotranspiration subrule. The maximum addition is 0.60. The ratings for the Nitrate Leaching Potential, Nonirrigated interpretation are calculated with different weighting factors than those above for the irrigated interpretation. The following Nitrate Leaching Potential, Irrigated rating classes are assigned based on the final calculation from the factors above: Low: 0.00 - 0.25 Moderate: 0.26 - 0.50 Moderately high: 0.51 - 0.75 High: 0.76 - 1.00 The ratings indicate the potential for nitrate leaching below the root zone, based on inherent soil and climate properties, and application of irrigation water. A “Low” rating indicates a low potential for nitrates to leach below the root zone. A “High” rating indicates a high potential for nitrates to leach below the root zone. The “Moderate” and “Moderately high” rating indicate intermediate potentials. The map unit components listed for each map unit in the accompanying Summary by Map Unit table in Web Soil Survey or the Aggregation Report in Soil Data Viewer are determined by the aggregation method chosen. An aggregated rating class is shown for each map unit. The components listed for each map unit are only those that have the same rating class as listed for the map unit. The percent composition of each component in a particular map unit is presented to help the user better understand the percentage of each map unit that has the rating presented. Other components with different ratings may be present in each map unit. The ratings for all components, regardless of the map unit aggregated rating, can be viewed by generating the equivalent report from the Soil Reports tab in Web Soil Survey or from the Soil Data Mart site. Onsite investigation may be needed to validate these interpretations and to confirm the identity of the soil on a given site.

  6. Go to http://websoilsurvey.nrcs.usda.gov/app/ To get started, Click on the Green Start button.

  7. The first thing you have to do is digitize an “Area of Interest” in order to create maps or run soil reports. To navigate to the general area, you can use the zoom tool or use one the methods under the “Quick Navigation” bar. You can use the Address, State and County, PLSS, or Latitude and Longitude. You can also use the Import AOI function to bring in a shapefile created outside of Web Soil Survey for your Area of Interest. Zoom tool

  8. In this example, I used the State and County method to navigate to Franklin County, Washington (click on View). Now you can use the zoom tool to zoom in closer to your general “Area of Interest”

  9. I used the zoom tool to zoom in to my general Area of Interest. I also clicked on the Legend tab and checked on the PLSS Township, Range and section layers which may be helpful in determining your area. Now we need to digitize the “Area of Interest” using one of the two AOI tools.

  10. There are two different ways to digitize your “Area of Interest”. You can use the square box AOI tool, which I have used here in this example, or you can use the polygon AOI tool and using a series of clicks to draw an irregular shaped area if this is what you need. (If you make a mistake and want to redo your Area of Interest, click on Area of Interest bar, then click AOI Properties and Clear AOI). You have to create this AOI before you can create a map or run soil reports.

  11. When it is finished you will get this blue hatched area. Now you need to click on the Soil Map tab and a soil map will appear of your Area of Interest.

  12. The soil map will appear with orange soil lines and a map unit symbol is labeled inside the polygon. The Map Unit Legend is visible also with a listing of the map units and acres that make up your Area of Interest. You can click on these blue-colored Map Unit Names to see a map unit description. To get to the Nitrate Leaching Reports you have to click on the Soil Data Explorer tab.

  13. Click on Suitabilities and Limitations for Use tab (If you do not want to make a map and just want the table report, go to next slide). Under the Land Management category, click on either the Nitrate Leaching Potential, Nonirrigated or Irrigated condition (WA) header and then click on View Rating. You should see a color coded map of the ratings with a table of the ratings below the map. Also included is a description of the report. Click on Printable Version bar to print map and table of ratings.

  14. If you just want to run a table report without the map, click on the Soil Reports tab, then over on the left click on AOI Inventory header, then click on Selected Soil Interpretations. Check either or both the nonirrigated or irrigated AGR - Nitrate Leaching Report and then click View Soil Report.

  15. Table of ratings for Nitrate Leaching Potential, WA. Scroll back up to top and click on Printable Version

  16. If you do not wish to print and want to save these to your computer, click on Shopping Cart (Free) and then click on Check out and you will have options to save maps and reports to your computer. (You can give your report a name or title here) Name of report

  17. Another option to run the Nitrate Leaching Potential reports without maps is on the field office servers. Just double-click the soil_d_access database in the F:FOTG\Section II folder (Franklin County example here). This will bring up a report generator. Then either Select All map units or pick individual map units by holding down the control key and selecting map units. Use the drop down menu under Report Name and select the Nitrate Leaching Potential (WA) reports. Then click Generate Report. Report output

  18. The Soil Data Mart will continue to have the capacity to generate soil reports also. Go to http://soildatamart.nrcs.usda.gov/ and Select State

  19. Select State and Survey Area

  20. Select Survey Area Name and click on Generate Report

  21. Select All map units or just choose individual map units by holding down control key and selecting map units. From the drop down menu choose Selected Soil Interpretations and click Generate Report Hold down control key and choose individual map units

  22. Hold down cntrol key and choose either or both AGR – Nitrate Leaching Potential (WA) reports. Click Generate Report

More Related