1 / 21

Two Years of VEX

Two Years of VEX. Mike Martin King HS, Riverside, CA February 22, 2013. Purpose. To share two years of ideas and findings with POE, CIM, and GTT teachers. To stimulate questions and discussion about VEX in the classroom. Battery Storage and Charging. The New Test Bed. The VEX Gear Box.

julie-avery
Download Presentation

Two Years of VEX

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Two Years of VEX Mike Martin King HS, Riverside, CA February 22, 2013

  2. Purpose • To share two years of ideas and findings with POE, CIM, and GTT teachers. • To stimulate questions and discussion about VEX in the classroom.

  3. Battery Storage and Charging

  4. The New Test Bed

  5. The VEX Gear Box

  6. The VEX Gear Box

  7. The VEX Gear Box

  8. Other Gear Boxes

  9. Attaching LEDs to a VEX Structure

  10. Attaching LEDs to a VEX Structure

  11. Inventor Parts

  12. Using FischerTech Parts with VEX

  13. Cortex Capabilities • The Cortex is extremely versatile. Any sensor that falls within specifications can be connected. • Analog characteristics: • 3 dB bandwidth of 16 kHz. • Analog input range: 0.0 v to 5.0 v. • Tolerant of -0.5v to +5.5v. • Only configurable as analog inputs. • Digital characteristics: • 3 dB bandwidth of 150 kHz. • Needs 0.0 to 0.6 volts for a low and 2.5 to 5.0 volts for a high. • Tolerant of -0.5v to +5.5v. • Can drive a 1 mA load to 1.6v or lower for a low and 1.4 volts or higher for a high.

  14. Basic Analog Sensors • Connect basic analog sensors to the Signal and +5V lines on the Cortex • Configure them as a light sensor or potentiometer in ROBOTC

  15. Basic Analog Sensors • The Potentiometer, Light Sensor, and Line Follower sensor types all perform simple A-to-D conversions on sensors, so any of them can be used with simple 3rd party analog sensors • Any sensors you configure will appear in the Sensor debug window, and can be accessed using the SensorValue[] command

  16. Basic Analog Sensors • The Touch and Digital In are basic sensor types and can be used with the basic digital sensors • Any sensors you configure will appear in the Sensor debug window, and can be accessed using the SensorValue[] command • If wired incorrectly, the sensor may have inverted logic values (pressed = 0)

  17. Basic Digital Sensors • Connect basic digital sensors to the Signal, +5V, and ground lines on the Cortex • Configure them as a touch sensor or digital input in ROBOTC

  18. Basic Digital Sensors • Connect basic digital sensors to the Signal, +5V, and ground lines on the Cortex • Configure them as a touch sensor or digital input in ROBOTC Red - +5V Ground Signal

  19. Advanced Sensors • Advanced sensors (ultrasonic, gyroscopes, ect) require that you perform calculations on the raw sensor data to get useful information (centimeters, degrees-per-second, ect) • These calculations are often referred to as “Sensor Drivers” • Value-returning functions can be very useful in these instances

  20. Other Findings and Ideas • Don’t do POE Activities 3.1.1 through 3.1.6 (or the CIM equivalent) • Too much Copy and Paste • Doesn’t give programming practice • Activities written for older version of RobotC • Instead, give the students ‘scenarios’ that they can use as programming practice • Prepare your own • Use the one I developed (on flash drive or email me with a request) • There is a document on the flash drive which details the EXACT order to set up a Cortex to communicate with a computer.

  21. Questions?

More Related