1 / 14

LHC IRQ Cryostat Production Readiness Review January 23, 2002 T. Page - Fermilab

LHC IRQ Cryostat Production Readiness Review January 23, 2002 T. Page - Fermilab. Shipping. Shipping Restraint. Road Tests. On-site, 20 mph maximum On-site, 40 mph maximum, (2) tests Off-site, Fermilab to Rock Falls Highway 88 to Rock Falls, Route 30 back Approximately 160 miles round trip

halden
Download Presentation

LHC IRQ Cryostat Production Readiness Review January 23, 2002 T. Page - Fermilab

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. LHC IRQ Cryostat Production Readiness ReviewJanuary 23, 2002T. Page - Fermilab

  2. Shipping T. Page

  3. Shipping Restraint T. Page

  4. Road Tests • On-site, 20 mph maximum • On-site, 40 mph maximum, (2) tests • Off-site, Fermilab to Rock Falls • Highway 88 to Rock Falls, Route 30 back • Approximately 160 miles round trip • Air-ride trailer. T. Page

  5. Instrumentation • Omega 3-axis shock recorder • One mounted to each end of the cold mass • Impact-O-Graph 3-axis strip chart recorder • Mounted to the bed of the truck T. Page

  6. Test Setup T. Page

  7. Test Setup T. Page

  8. Results Summary • Coordinate system • X : axial • Y : transverse • Z : vertical • Good agreement between shock recorders and chart recorder. • Maximum forces (off-site test): • X-axis: 1.35 g’s. • Y-axis: 2.15 g’s. • Z-axis: 1.35 g’s. T. Page

  9. Sample Data from Shock Recorder T. Page

  10. Results (cont.) • Stretched wire measurements in progress. T. Page

  11. Next Step • Add support structure between truck bed and cryostat support. • Use Dow 4#, 6# and 9# foam. • Repeat tests. T. Page

  12. Shipping Support Structure T. Page

  13. Shipping Support Structure T. Page

  14. Next Step (cont.) • Tests will be performed February / March. • Expect the maximum load to be approximately 1 g. • Incorporate support into shipping container. T. Page

More Related