1 / 6

ME 3351 Manufacturing Processes

ME 3351 Manufacturing Processes. Tutorial 3 Eng. Ahmad Aljazea. H.W. Sand casting is which of the following types? ( a) expendable mold . The upper half of a sand casting mold is called which of the following ? Cope In casting, a flask is which one of the following:

astrid
Download Presentation

ME 3351 Manufacturing Processes

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. ME 3351 Manufacturing Processes Tutorial 3 Eng. Ahmad Aljazea

  2. H.W • Sand casting is which of the following types? (a) expendable mold. • The upper half of a sand casting mold is called which of the following? • Cope • In casting, a flask is which one of the following: (b) box which holds the cope and drag.

  3. In foundry work, a runner is which one of the following? (a) channel in the mold leading from the downsprue to the main mold cavity. • Total solidification time is defined as which one of the following? (a) time between pouring and complete solidification. • During solidification of an alloy when a mixture of solid and liquid metals are present, the solid-liquid mixture is referred to as which one of the following? (d) Mushy zone.

  4. Chvorinov's Rule states that total solidification time is proportional to which one of the following quantities? (f) (V/A)2; where A = surface area of casting, Hf = heat of fusion, Tm = melting temperature, and V = volume of casting. • A riser in casting is described by which of the following (may be more than one answer)? • (c) metal that is not part of the casting, (d) source of molten metal to feed the casting and compensate for shrinkage during solidification, and (e) waste metal that is usually recycled.

  5. In a sand casting mold, the V/A ratio of the riser should be which one of the following relative to the V/A ratio of the casting itself ? (b) greater. A riser that is completely enclosed within the sand mold and connected to the main cavity by a channel to feed the molten metal is called which of the following (may be more than one)? (a) blind riser. (c) side riser.

  6. A riser that is completely enclosed within the sand mold and connected to the main cavity by a channel to feed the molten metal is called which of the following (may be more than one)? (a) blind riser, (b) open riser, (c) side riser, and (d) top riser.

More Related