1 / 8

41-pin feed-through treatments

41-pin feed-through treatments. TPC-05-C. A minimalist Weldment. Built around the 41-pin feed-through 16015-02-W. 16015-02-W. Note: Access is denied after the Feed-through fitting is welded into place. Connections must be made to the fitting,

yoshio-zamora
Download Presentation

41-pin feed-through treatments

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. 41-pin feed-through treatments TPC-05-C

  2. A minimalist Weldment. Built around the 41-pin feed-through 16015-02-W. 16015-02-W

  3. Note: Access is denied after the Feed-through fitting is welded into place. Connections must be made to the fitting, then the wires are threaded back through the Lid, then the fitting is welded into place. Awkward, and Permanent. 16015-02-W

  4. ALSO, This is NOT good practice ! The weld should be on the Vacuum side. ( I haven’t figured out yet how to do that ) 16015-02-W

  5. This treatment uses 41-pin Conflat 17156-01-CF 17156-01-CF

  6. A bit roomier on the inside. With slack in the wire, inside, You can also get access to the solder side of the pins. 17156-01-CF

  7. 17156-01-CF

More Related