1 / 10

XPC Control Target A/D Converter P10021

XPC Control Target A/D Converter P10021. 4051 MUX. Counter. Internal Clock. LVAD. In/Out. Ground. Out/In. 15V. Counter. 4051 DEMUX. Motor Controller. 2 Sum. Op-Amplifiers 4 Diff. Op-Amplifiers. 4051 DEMUX. Counter. Internal Clock. PWM Generator (4 Amplifiers). Out/In. Ground.

yasir-simon
Download Presentation

XPC Control Target A/D Converter P10021

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. XPC Control Target A/D Converter P10021 4051 MUX Counter Internal Clock LVAD In/Out Ground Out/In 15V Counter 4051 DEMUX Motor Controller 2 Sum. Op-Amplifiers 4 Diff. Op-Amplifiers 4051 DEMUX Counter Internal Clock PWM Generator (4 Amplifiers) Out/In Ground 15V In/Out Counter 4051 MUX Voltage Regulator 5, 12, 15, Ground 13 Pins of DV 15

  2. Available Cables HeartAssist 5™ Pediatric VAD Berlin Heart: INCOR Pump Cable: Silicone Current pumps on the market use a cable about the size of a coaxial line

  3. Motor Receiver Motor Controller PWM Amps 4 Total Wireless Signal Transmission (INT) Interior Electronics (Proposed) Pump Transmitter 12-bit A/D 6 Total 72 bits 72 bits 6 signals HESA Hall Effect Sensor Array 2 Total Differential/Summing Amps 6 Total 5V 8 signals 3 currents 12V 5 bits 4 currents AMB Active Magnetic Bearing 2 Total 15V Clock FPGA For Signal Processing

  4. Wireless Signal Transmission (EXT) Miniaturization Project Exterior Electronics (Proposed) Control XPc Target 6 signals FPGA For Signal Processing Receiver 72 bits 72 bits Motor Control Signal PWM Control Signals (4 or 8) 5 bits Transmitter 5 bits Clock • Benefits • Eliminates all signal wires • Cons • 300kHz channels require data in packets • Higher bit error rate • Limited products available • Requires 2 Wires • 15 V Line • Ground Line

  5. Motor Multi-Channel Single Wire Signal (INT) Interior Electronics (Proposed) Pump 12-bit A/D 6 Total 72 bits 6 signals HESA Hall Effect Sensor Array 2 Total USB Transceiver Differential/Summing Amps 6 Total 5V 8 signals 72 bits 5 bits 12V 3 currents 5 bits 1 signal 1-bit Registers Motor Controller AMB Active Magnetic Bearing 2 Total 15V 4 currents PWM Amps 4 Total 4 signals

  6. Multi-Channel Single Wire Signal (EXT) Miniaturization Project Exterior Electronics (Proposed) Control XPc Target USB Transceiver 72 bits 72 bits 5 bits 5 bits • Benefits • Allows for wider bandwidth • Decrease probability of error • More control of channel • Cons • Data rate may be too fast • Requires 3 Wires • 15 V Line • Ground Line • 1 Signal Wire

  7. Motor Wire- “Less” Proposal (INT) Interior Electronics (Proposed) Pump 6:1 Multiplexer Differential/Summing Amps 6 Total HESA Hall Effect Sensor Array 2 Total 5V 8 signals Wired Signal Motor Controller 3 currents 12V 1:5 Multiplexer Wired Signal PWM Amps 4 Total 8 currents AMB Active Magnetic Bearing 2 Total 15V Clock 3-bit Counter

  8. Wire- “Less” Proposal (EXT) Miniaturization Project Exterior Electronics (Proposed) 6 position signals Wired Signal Control XPc Target 1:6 Multiplexer 1 Relay Signal 3-bit Counter Clock Counter Wired Signal 5:1 Multiplexer 4 PWM Control Signals • Benefits • Cost Effective • Wired signal more reliable than wireless • Cons • Signal only available fraction of time • Will require synchronization commands with project 10021 • Requires 4 Wires • 15 V Line • Ground Line • 2 Signal Wire • (1 Clock sync wire)

More Related