1 / 21

Sun beta angle residuals in solar diffuser measurements of the MODIS ocean bands

Sun beta angle residuals in solar diffuser measurements of the MODIS ocean bands. Gerhard Meister a , Junqiang Sun b , Robert E. Eplee Jr. a , Frederick Patt a , Jack Xiong b , and Charles McClain a a : OBPG (Ocean Biology Processing Group; GSFC)

whitneyv
Download Presentation

Sun beta angle residuals in solar diffuser measurements of the MODIS ocean bands

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Sun beta angle residuals in solar diffuser measurements of the MODIS ocean bands Gerhard Meistera, Junqiang Sunb, Robert E. Eplee Jr.a, Frederick Patta, Jack Xiongb, and Charles McClaina a: OBPG (Ocean Biology Processing Group; GSFC) b:MCST (MODIS Characterization Support Team; GSFC) August 11, 2008 Earth Observing Systems XIII, SPIE Optonics + Photonics 2008, San Diego

  2. Background • Ocean color remote sensing imposes very stringent requirements on radiometric precision (goal is 0.2% relative accuracy) • Seasonal oscillations of calibration coefficients could lead to misinterpretations of ocean data • Accuracy goal is especially demanding for prediction of calibration coefficients (necessary for operational sensors) • This talk: β angle dependence for MODIS Aqua (update) and Terra (new)

  3. MODIS SD Measurement Setup From: Waluschka et al, 2004.

  4. Simplified Solar Diffuser Geometry Slide (modified) from R. Wolfe’s presentation at the MODIS Science Team meeting, Baltimore, March 2005

  5. Sun beta angle Range for Terra and Aqua: β = 140 – 280

  6. Calibration coefficients: m1 • Measured m1, provided by MCST (approx. bimonthly) • Not used in calibration LUTs • Calculated with: m1 = BRF * cos(θSD) * Δ * VF / (dn * d2ES) θSD= solar zenith angle on the SD VF = vignetting function from SD screen Δ = SD degradation measured by SDSM dn* = measured counts from SD (temperature corrected) minus dark current dES = distance Earth-Sun

  7. Detector Ratio 10/1 For Band 12 Primary and secondary peaks are well correlated with β angle

  8. Detector Ratio 10/1 For Band 12 Detector Ratio Plotted Versus β angle

  9. MODIS Focal Planes

  10. Det.10/1 versus β for MODIS Aqua

  11. Det.10/1 versus β for MODIS Terra

  12. From detector ratios to absolute correction • Detector ratios show effect, but correction must be applied absolute • Old method: assume degradation (e.g. exponential) for m1, calculate correction using residuals (based on 3 years of data) • New method: calculate rolling 1-year average, calculate correction using residuals (6 years of data) • Residual ri = m1(ti)/<m1(ti)>, then fit 3rd order polynomial to ri(β)

  13. ri(β) for all MODIS Aqua bands for detector 10(solid=new fit, dashed=old correction)

  14. ri(β) for MODIS Aqua band 8, det.10 Scatter in band 8 is not random, it is correlated with time => 1-year averaging not accurate enough for band 8

  15. ri(β) for 4 MODIS Terra bands, detectors 1 and 10

  16. ri(β) for MODIS Terra may change with time E.g. Band 16, detector 10: 0.4% m1 drop at beta angle maxima (dashed line) after SD anomaly (dotted line), but not before

  17. Operational prediction of m1 for MODIS Aqua Top two plots: old correction Bottom two plot: new correction Notice the spread of the residuals is reduced with the new correction => More reliable prediction into the future

  18. Relative detector trending: MODIS Aqua

  19. Relative detector trending: MODIS Terra

  20. SD screen on VIIRS • VIIRS is follow-on sensor to MODIS • VIIRS SD screen not movable, no on-orbit characterization of VF possible • VF will only be measured on component level, not system level • Aqua beta angle correlation unexplained by raytrace modeling • How can we be sure that component level VF same as system level VF ?

  21. Summary • Maximum variation in MODIS Aqua m1 measurements due to β angle: 0.8%, significant for ocean color • Correction useful for predicting future trends • Variation in MODIS Terra: less than half, possibly changing with time • Both sensors show similar detector degradation relative to central detector • VIIRS sensor will only have component level SD screen characterization

More Related