1 / 10

Energy Conversion

Energy Conversion. CHE 450/550. Ideal Gas Basics and Heat Capacities - I. Ideal gas: a theoretical gas composed of a set of non-interacting point particles. obeys the ideal gas law: PV=nRT R is “gas constant” [R = 8.314 J·K -1 ·mol -1 ] You may see R specific =R/MW [J·K -1 ·kg -1 ]

thyra
Download Presentation

Energy Conversion

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Energy Conversion CHE 450/550

  2. Ideal Gas Basics and Heat Capacities - I Ideal gas: • a theoretical gas composed of a set of non-interacting point particles. • obeys the ideal gas law: PV=nRT • R is “gas constant” [R = 8.314 J·K-1·mol-1] • You may see Rspecific=R/MW [J·K-1·kg-1] • At close to normal conditions most real gases behave like an ideal gas. • Various relationships written. Most useful

  3. PV and TS diagrams Some key terms: Isobar – “at the same pressure” Isochore – “at the same volume” Isotherm – “at the same temperature” Isentropic – “at the same entropy” Adiabatic – “without heat exchange (with the surroundings)” P T V S

  4. PV and TS diagrams – Isobar and Isochore Isobar – “at the same temperature” Isochore – “at the same volume” Where do those go on the PV and TS diagrams? P T V S

  5. PV and TS diagrams – Isotherm, Isentropic and Adiabatic Isotherm – “at the same temperature” Isentropic – “at the same entropy” Adiabatic – “without heat exchange (with the surroundings)” Where do those go on the PV and TS diagrams? P T V S

  6. TS diagram – Isobars with phase change

  7. Ideal Gas Basics and Heat Capacities - II Heat capacity “C” relates the change in temperature DT that occurs when an amount of heat DQ is added Usually given as per mass (specific heat capacity, c) [J.kg-1.K-1] The conditions under which heat is added play a role: • At constant volume, cV=(du/dt)V (no PV work performed during heating) • At constant pressure cP=(dh/dt)P (constant P, so as T increases, V increases: PV work performed) • A thermally perfect gas can be shown to have cP=cV+Rspecific (Sorry but it would take too long to go through the formal derivation of this)

  8. Ideal Gas Basics and Heat Capacities - III • An important quantity is k=cP/cV, • known as the “adiabatic index” or “isentropic expansion factor” (you’ll also see it written as g gamma or k kappa) • In general cV and cP are functions of kinetic energy of molecules forming a material (translational, vibrational, rotational), and intra- and intermolecular forces.

  9. Brayton Cycle http://commons.wikimedia.org/wiki/File:Brayton_cycle.svg

  10. Rankine Cycle

More Related