1 / 7

Heat Flux [Wm -2 ]

Heat Flux [Wm -2 ]. Heat Transfer Coefficient [Wm -2 K -1 ]. Temperature [°C]. Cooling Properties By Region. Squirt Nozzle. In RFQ Sections 1 & 4 only Designed for high flow velocity (5ms -1 ) for higher cooling at vane ends

Download Presentation

Heat Flux [Wm -2 ]

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Heat Flux [Wm-2]

  2. Heat Transfer Coefficient [Wm-2K-1]

  3. Temperature [°C]

  4. Cooling Properties By Region

  5. Squirt Nozzle • In RFQ Sections 1 & 4 only • Designed for high flow velocity (5ms-1) for higher cooling at vane ends • In same cooling circuit as major and minor end pockets (i.e. not separately flow controlled) • 3mm pipe diameter constricts flow. Pushes up required pressure in those pockets to ~0.3 Bar

  6. Water Temperature Rise The re-circulating path of the pocket flow channel causes a water temperature rise of 5°C

  7. Conclusions • 50kW heat load  125 Wcm-1 • With described cooling: -100kHz frequency shift • 2-4 L/min rates throughout • Need separate control for minor vane centre pockets and vacuum port cooling • Highest flow in end wall and vac-pump port • 5°C water temperature rise is fine • Squirt nozzle  higher pressure in end pockets

More Related