1 / 19

Efficient Layout Design Tips: Adding Contact to Metal 1 Layer

Discover how to enhance your layout design process by adding contact to the Metal 1 layer using DRC early on. Learn to effectively manage your layout with commands and filters. Ensure accuracy and prevent errors in your layout designs.

theoris
Download Presentation

Efficient Layout Design Tips: Adding Contact to Metal 1 Layer

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Lesson One • Start doing DRC before you get too far with your layout

  2. Here is how you add contact to the poly layer from Metal 1 • Type pc in the layout window

  3. Here is how you undo something • Type the following command in the layout windo

  4. Change Grid

  5. Use Select Filter to limit what you select

  6. Here is how to find the Setup Filter

  7. A list of commands

  8. How to add a port

  9. You usually have to find the LVS src.net

  10. When you prep a schematic for a layout, you will produce an SDL view as well as the src.net

  11. Horrible things can happen when you unsave a cell…

  12. Step 1: Click on the port

  13. Step 2 • Use the space bar to step through different metal layers

  14. Step 3 • Add text label

  15. Solution: Change XOR name

  16. Unselect all

More Related