1 / 13

Measurement

Measurement. Introduction. There are many different ways that measurement is used in the real world. When you stand on a scale to see how much you weigh, you are measuring. Here are a few fact about Mississippi and the Earth using measurement:

tfaith
Download Presentation

Measurement

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Measurement

  2. Introduction There are many different ways that measurement is used in the real world. When you stand on a scale to see how much you weigh, you are measuring. Here are a few fact about Mississippi and the Earth using measurement: • Woodall Mountain is the highest point in the state of Mississippi. This mountain rises 806 feet above sea level. • The area of Mississippi is about 125,444 km2. • The circumference of the Earth is calculated to be about 25,000 miles.

  3. Length • To measure customary units in length, use an inch ruler for length of 1 foot or less, a yardstick for lengths of 3 feet or less, and a tape measure for longer lengths. • To measure metric units of length, use a centimeter ruler for lengths up to 30 centimeters, a meter stick for lengths of 1 meter or less, and a tape measure for longer lengths.

  4. Example—What is the measure of the long side of this rectangle to the nearest 1/16 inch? • Step 1—Place the ruler beneath the rectangle. Align the 0-mark of the ruler with the left edge of the rectangle. • Step 2—Read the mark on the ruler that aligns with the right edge of the rectangle. • The mark is 6 marks after the 3. • The length is 3 6/16 inches. • Step 3—Write the length in simplest form. • 3 6/16 = 3 3/8 The length of the long side of the rectangle is 3 3/8 inches.

  5. Perimeter • Perimeter measures the distance around the outside of a closed figure. • To find the perimeter of a polygon, add the lengths of all the sides. • To find the perimeter of a rectangle, you can use the following formula: P = 2l + 2w • To find the perimeter of a regular polygon, multiply the length of a side times the number of sides.

  6. Example—What is the perimeter of this rectangle? • Use the formula: P = 2l + 2w • Substitute the length and the width into the formula. Then compute. • P =(2 • 27.5 mm) + (2 • 16.25 mm) • P = 55 mm + 32.5 mm = 87.5 mm • The perimeter is 8.5 millimeters.

  7. Composite Figure • A composite figure is a figure composed of two or more figures. • To determine the perimeter of a composite figure, measure the distance around the outside of the figure.

  8. Example—What is the perimeter of the composite figure? 5 cm 3 cm 4 cm 4 cm 3 cm 5 cm • Find the lengths of the missing sides. Then add the side lengths. • Use the properties of congruent figures to find the missing measures. • The rectangle has a width of 4 cm. • The left side of the rectangle is 4 cm. • Add the lengths of the sides. • 5 cm + 3 cm + 4 cm + 4 cm + 5 cm + 3 cm + 4 cm + 4 cm = 32 cm • The perimeter of the figure is 32 cm. 4 cm

  9. Circumference • Circumference is the distance around the outside of a circle. • The circumference of a circle can be found if you know the length of either the radius or the diameter. • The radius is a line segment of the center to any point on the circle. • The diameter is a line segment with any two points on the circle that passes through the center. The diameter is twice the length of the radius. • If you know the radius of a circle, you can use the formula C = 2πr to find the circumference. • If you know the diameter, you can use the formula C = πd. • π(pi) is the circumference divided by the diameter. • The exact value of π has never been determined, but you can use either 3.14 or 3 1/7 as an approximate value.

  10. Example—What is the approximate circumference of a circle with a radius of 7 centimeters? Use 3.14 for π. • Use the formula for the circumference of a circle: C = 2πr. • Substitute the value for the variable. Then multiply. • Substitute the value for the variable. Then multiply. • C ≈ 2 • 3.14 • 7 ≈ 43.96 • The approximate circumference of the circle is 43.96 cm.

  11. Area • Area measures the inside region of a closed figure. • Area is measured in square units. • A square unit is an area equal to that of a square whose sides are one unit long. • For example, a square centimeter (cm²) is an area equal to that of a square whose sides are 1 cm long. • To find the area of a rectangle, use the formula A = lw.

  12. Example—A rectangular playground has a length of 35 yards and width of 25 yards. What is the area of the playground? • Use the formula for the area of a rectangle: A = lw. • A = 35 yd• 25 yd • A = 875 yd² • The area of the playground is 875 yd².

  13. Example—Lee’s property is 400 feet long by 200 feet wide. What is the area of Lee’s property? • Use the formula for the area of a square: A = s². • A = 400 ft • 200 ft • A = 80,000 ft² • The area of Lee’s property is 80,000 ft².

More Related