1 / 27

MEASUREMENT

MEASUREMENT. MEASUREMENT. Measurement is the determination of the dimensions,quantity or capacity of an item. To measure physical quantities such as mass,time,length etc we use UNITS. A unit is a fixed quantity used as a standard for measurement. Systems of Units : .

rory
Download Presentation

MEASUREMENT

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. MEASUREMENT

  2. MEASUREMENT Measurement is the determination of the dimensions,quantity or capacity of an item. To measure physical quantities such as mass,time,length etc we use UNITS. A unit is a fixed quantity used as a standard for measurement.

  3. Systems of Units : • There are following principle system of units: • C.G.S System : length ? centimeter (cm), mass ? gram (g) time ? second (s). • F.P.S System : length ? foot (ft), mass ? pound (lb), time ? second (s). • M.K.S. System: length ? meter (m), mass ? kilogram (kg), time ? second (s)

  4. SI UNITS…

  5. MASS • Mass of a body is defined as the quantity of matter in the body. • We express mass of an object in gram (g) kilogram (kg) , tonne , quintal etc • The SI unit of mass is kilogram. •  Mass of an object does not change from place to place.

  6. UNITS OF MASS Some of the commonly used units of mass and conversions are : • 1 tonne = 10 quintal • 1 quintal = 100 kg • 1 kg = 1000 g • 1 g = 1000 mg

  7. Measurement of mass

  8. Beam balance • A beam balance consists of a horizontal beam , supported at its centre. • Two pans of equal masses are suspended from both the ends of the beam. • The object is kept on one pan and the standard masses on the other. • When both the pans are equally loaded , the beam is horizontal and the pointer points vertically up at the center.

  9. Physical balance

  10. Physical balance • Physical balances are utilized for precision mass measurement . • A physical balance can measure accurately upto a milligram. • It is provided with a box of standard masses ranging from 1mg to 100g. • It works on the same principle as that of a beam balance.

  11. WEIGHT • Weight is the force exerted on a body by gravity. • This is often expressed in the formula W = mg, where W is the weight, m the mass of the object, and g gravitational acceleration • The SI unit of weight is Newton(N)

  12. Measurement of weightSpring balance

  13. Measurement of weight • A spring balance is used to measure weight of a body • It consists of a spring fixed with a pointer at the upper part anda hook at the lower end to suspend the body • The extension produced in a spring is directly proportional to the gravitational force acting on it.

  14. Comparison between mass and weight

  15. DENSITY • The density of a material is its mass per unit volume. • The symbol most often used for density is ρ (the lower case Greek letter rho). • ρ =m/V • where ρ is the density, m is the mass, and V is the volume. • The SI unit of density is kg/m3

  16. Density of different substances

  17. Question??? Equal masses of iron and common salt have different volumes.

  18. Determining the density of a irregular solid • For an irregular solid like a stone, volume can be found using a graduated measuring cylinder. • The measuring cylinder is half filled with water and the initial water level is noted • Then the stone is immersed in water with the help of a thread and the reading of the water level is noted • The mass of the stone is determined using a physical balance

  19. Thus the density of the stone is found using formula D=M/(Final volume-Initial volume)

  20. RELATIVE DENSITY • Relative density, or specific gravity, is the ratio of the density (mass of a unit volume) of a substance to the density of a given reference material. • It tells us how dense or heavy is the density of a substance with respect to water • Relative density has no units

  21. Measurement of relative density of a liquid • The relative density of a liquid can be determined with the help of a relative density bottle

  22. Relative density bottle • It is a small, thin walled glass bottle with a stopper having a fine hole. • The mass( m1 ) of the empty bottle is determined using a physical balance. • The liquid whose density is to be measured is filled into the bottle and its mass( m2 ) is determined. • Now clean the bottle thoroughly and find the mass of bottle when it is filled with water(m2 )

  23. Calculating RD • RD=Density of liquid Density of water =Mass of liquid/Volume of liquid Mass of water/Volume of water = (m2 – m1 ) / (m3 – m1 )

  24. Practical application of relative density • Looking at the RD of different substances we can find whether an object or a liquid sinks or floats in water. • If a substance‘s RD is less than one it floats in water. • If a substance‘s RD is more than one it sinks in water.

  25. HYDROMETER • Hydrometer is a device designed to float on a liquid • There are special hydrometers for liquids lighter and denser than water, for testing the purity of milk, for testing the concentration of acids in batteries.

  26. Reference • http://www.convertunits.com/ • http://www.easyunitconverter.com/ (conversion) • http://www.aasd.k12.wi.us/staff/boldtkatherine/MathResources3-6/Math_Measurement.htm#LENGTH (interactive) • http://www.syvum.com/cgi/online/serve.cgi/squizzes/physics/measure1.tdf?0 (quiz)

More Related