1 / 3

Linear Motor Design Project Update - December 2010

This document provides an update on the progress of the linear motor design project, highlighting completed sections, missing elements, and areas needing further work. It discusses electromagnetic and mechanical design aspects, optical position measurement system, control system, power electronics, and performance analysis. A summary indicates work pending completion and tasks for the coming year.

stefan
Download Presentation

Linear Motor Design Project Update - December 2010

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Target Paper Status Summary 21st December 2010 Chris Booth

  2. 1 Introduction (KL) ok • 2 Requirements and Overview (CB) ok • 3 Linear motor (CB) • 3.1 Electromagnetic design (PS) missing • 3.2 Stator (CB,PS) needs figs & refs • 3.3 Permanent magnets (CB,PS) needs figs & refs • 4 Mechanical design and construction (JT) • 4.1 Target Shaft (JT) needs editing, figs etc • 4.2 Target Bearings (JT) needs editing, figs etc • 4.3 Stator (JT) needs editing, figs etc • 4.4 Mechanical integration (who?? Was EMcC) missing • 4.5 Quality Assurance and Quality Control (JT, GB, PS) partly • 5 Optical position-measurement system (CB,PS) nearly! • 5.1 Optical Vane (PS,CB) needs figs & refs • 5.2 Laser Source (PS,CB) needs figs & refs • 5.3 Optical Fibres (PS,CB) needs figs & refs • 5.4 Collimators, Lenses & Mechanical Mount (PS,CB) partly • 5.5 Optical sensors (PS,CB) partly • 6 Control system (PS,JL) missing • 7 Power electronics (PS,SG) missing • 8 Performance (PH,AD) missing • 9 Summary (CB) missing

  3. Summary • Not a lot of progress since early November! • Hope to restart editing in New Year. • Lots of material provided by JT. CB to edit to make consistent with rest. • Intro provided by KL. • Other sections written by CB (partly plagiarising PS thesis!). • Most lack (sufficient quality) figures. • Many sections not yet provided! • Who will write “mechanical integration” section (frame, jacking system, services)? • I can write functional description. • Is that sufficient? • Previously decided (I think!) to document design of last summer. Do we wish to update? • Review when present version complete?

More Related