1 / 17

INSTRUMENTATION DESIGN AND APPROVAL

INSTRUMENTATION DESIGN AND APPROVAL. HAIS Developers’ Workshop. REQUIREMENTS. Regulatory Title 14 CFR Part 21, Certification Title 14 CFR Part 25, Airworthiness Standards Title 14 CFR Part 43, Maintenance,…and Alteration Title 14 CFR Part 91, General Ops and Flight Rules Guidance

skah
Download Presentation

INSTRUMENTATION DESIGN AND APPROVAL

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. INSTRUMENTATIONDESIGN ANDAPPROVAL HAIS Developers’ Workshop HAIS Workshop

  2. REQUIREMENTS • Regulatory • Title 14 CFR Part 21, Certification • Title 14 CFR Part 25, Airworthiness Standards • Title 14 CFR Part 43, Maintenance,…and Alteration • Title 14 CFR Part 91, General Ops and Flight Rules • Guidance • AC 21-40, STC Application Guide • AC 25-10, Non-required Equipment installation • AC 43-13, Acceptable Methods- Aircraft Alterations • AC 43-210, Field Approval Procedures • NSF/NCAR GV Investigator’s Handbook HAIS Workshop

  3. APPROVAL PROCESS • Research • Plan and determine eligibility • Submit Data Package • Descriptive and substantiating data • Inspection and Test • Detailed parts, components, and subassemblies • Perform Alteration / Installation • Inspection and Test • Assembly, modification and installation • Flight Clearance HAIS Workshop

  4. PRIMARY RESPONSIBILITY • Research Developer & NCAR • Submit Data Package Developer • Inspection and Test Developer • Perform Alteration NCAR • Inspection and Test NCAR • Flight Clearance NCAR HAIS Workshop

  5. DATA PACKAGE • Descriptive Data • Completely define a given design, including all critical equipment, parts, and attachments • Drawings, sketches, marked-up photographs, process specs,… • Substantiating Data • Shows compliance with the applicable regulations • Basic loads analysis, structural analysis, electrical load analysis, test plans and reports,… HAIS Workshop

  6. TESTING • Detailed parts, components and subassemblies produced by the developer are considered miscellaneous, non-required equipment and normally do not require testing for approval. • Testing may be prudent to ensure equipment operability on the GV platform (see RTCA/DO 160D, Environmental Conditions and Test Procedures for Airborne Equipment and NSF/NCAR GV Investigator’s Handbook) • Assembly and installation testing by NCAR may be required for approval (EMI/RFI, structural, icing,…) HAIS Workshop

  7. KEY DESIGN GUIDELINES • Consult GV Investigator’s Handbook Section 5 for structural and electrical design criteria • Utilize appropriate materials • Metallic materials: MMPDS 001 (Formerly Mil-Handbook 5H) • Aerospace quality hardware (AN, MS, NAS, NASM) • Genuine Aircraft Hardware Co. is a good source (http://www.gen-aircraft-hardware.com) • Fasteners must incorporate some locking method • Non-metallic materials must meet flammability requirements (non-flammable or self-extinguishing) • Windows must be non-splintering and able to maintain cabin pressure after any single failure in the installation. • Design within aircraft capabilities HAIS Workshop

  8. LOADS • Ultimate vertical loads factors: • Forward fuselage (GVFS44.5-GVFS229) 6.0g • Mid fuselage (GVFS229-GVFS632) 6.43g • Aft fuselage (GVFS632-GVFS758) 7.0g • Tail compartment (GVFS758-GVFS956) 8.12g • BL193 wing store 6.23g • Vertical tail deck 8.9g and BL123 and BL264 wing store • Design pressures • Max emergency relief valve pressure: 10.48 psi • Design limit pressure: 1.67 x 10.48 = 17.50 psi • Design ultimate pressure: 1.50 x 17.50 = 26.25 psi HAIS Workshop

  9. EXTERIOR CAPABILITIES • Apertures • External equipment: Wtmax = 50 lbs, Af = 54 sq in, hcg = 12 in • Internal equipment: Wtmax = 25 lbs, V = 16x16x8 in, hcg = 8 in • Optical Ports • Optical units: Wtmax = 90 lbs • External equipment at aft, lower: Wtmax = 36 lbs, Af = 64 sq in, hcg = 10 in • Window Blanks • Equipment: Ø2 in, Mmax = 600 in-lbs • Wing Hard-points • BL193: Ø20 in, L = 13.3 ft, Wtmax = 1500 lbs • BL123 and BL264 : 2 PMS style probes per hardpoint HAIS Workshop

  10. LARGE WING STORE BL193 HAIS Workshop

  11. SMALL WING STORE BL264 BL123 HAIS Workshop

  12. INTERIOR CAPABILITIES • Cabin Floor • GVFS229-GVFS426: 49 psf over entire width 98 psf with 20 in aisle • GVFS426-GVFS632: 100 psf • GVFS632-GVFS758: 65 psf • Floor Track • Track from GVFS229 to GVFS632 at LBL and RBL18.5 and BL 30.5 • Maximum of three attachments between adjacent floor beams • Ceiling Track • Track from GVFS277 to GVFS600.5 at LBL and RBL18.5 • Maximum of two attachments between adjacent frames • Equipment, wiring: Wtmax = 4 lbs / in HAIS Workshop

  13. GV PLANVIEW HAIS Workshop

  14. RACK CAPABILITIES • Standard equipment rack • Dims : 50.1 in tall x 28 in deep x 21.5 in wide • 24U (42 inch) EIA mounting rails on forward and aft face for standard 19 in rack mounted equipment • Mounting plate on bottom and top face • 3.6 in vertical clearance between mounting plates and EIA rails • Maximum equipment weight = 360 lbs • 240 lbs max for either forward or aft face • 60 lbs max for top mounting plate • Maximum equipment moment = 8820 in-lbs (reference: frame to lower plate interface) HAIS Workshop

  15. CABIN LAYOUT HAIS Workshop

  16. RACK DESIGN HAIS Workshop

  17. QUESTIONS HAIS Workshop

More Related