'Surface finish' presentation slideshows

RAPID PROTOTYPING TECHNOLOGIES Prof. Dr. Bilgin KAFTANO?LU mfge.atilim.tr/kaftanoglu

RAPID PROTOTYPING TECHNOLOGIES Prof. Dr. Bilgin KAFTANO?LU www.mfge.atilim.edu.tr/kaftanoglu Manufacturing Engineering Department ATILIM UNIVERSITY ANKARA. WHAT IS PROTOTYPING? Essential part of the product development and manufactuing cycle;

975 views • 74 slides

THEORY OF METAL MACHINING

THEORY OF METAL MACHINING. Machining variables. There are two kinds of machining variables : Independent variables Dependent variables. In cutting process, the major independent variables , that is, the variables that we can change and control directly, are :

2.56k views • 61 slides

U5MEA08-ENGG METROLOGY & INSTRUMENTATION

U5MEA08-ENGG METROLOGY & INSTRUMENTATION. UNIT- I METROLOGY UNITS AND MEASUREMENTS.

1.46k views • 60 slides

Vertical and Horizontal Mills

Vertical and Horizontal Mills. Vertical Mill. Parts. Base and Column Knee Saddle Table Ram Tool Head Quill Feed. Cutter Holding. No more overhang than is necessary R8 Taper Solid Collet (most rigid) Split Collet. Vertical Milling Cutters. End mills. 2 or more flutes

628 views • 43 slides

Casting Processes I

Casting Processes I. Dermot Brabazon. Ref: Kalpakjian, Serope, Manufacturing engineering and technology. - 3rd ed. Reading, Mass : Addison-Wesley, 1995. - 0201538466 MAIN LENDING 670.42/KAL (Also: MAIN LENDING 670/KAL ). = Casting Processes. The Material Transformation Process. SLS.

645 views • 42 slides

Colour Technology

Colour Technology. Colour Technology. Why are we using colours? . Identification Branding Convey a Mood or a Style Choice. Introduction to Colour Technology. Assessment and Measurement of Colour Factors Affecting Colour Matching Methods of Colouring. observer. light source. object.

379 views • 37 slides

Abrasive Processes

Abrasive machining involves material removal by the action of hard abrasive particles that are usually in the form of a bonded wheel.

3.45k views • 33 slides

PowerMILL developments

PowerMILL developments. Chris Edwards European Business Development Director Delcam plc. PowerMILL benefits. Actual Part. Simulation. Easy to use Wide range of strategies for 2-5 axis machining Fast toolpath generation Powerful toolpath editing Integrated toolpath verification

438 views • 25 slides

Surface Finish

Surface Finish. An engineering component may be cast, forged, drawn, welded or stamped, etc. All the surfaces may not have functional requirements and need not be equally finished

2.04k views • 23 slides

AMESim Heat Generation Model

CAViDS Consortium. AMESim Heat Generation Model. A CAViDS Consortium Project. Advisory Board Report July 21, 2011. CAViDS Consortium. Project Objective. Develop AMESim heat generation modeling capability for gearbox systems which compares favorably with experimental results.

441 views • 22 slides

POURNAMI TOOLS

POURNAMI TOOLS. Single Pass Honing Tools. POURNAMI TOOLS. POURNAMI TOOLS is on the business of manufacturing fine / finishing tools for the past 15 years Located in Chettiyarpatti , an industrial hub in South India, PT has good access to engineering brains and skilled man power

345 views • 18 slides

Art History Projects!

Art History Projects!. Requirements. 3-D sculpture resembles a masterpiece by your artist Successfully added personal expression Wheel thrown and/or hand-built pieces included in your design Surface finish decoration. At least 6 in. in one dimension At least 3 in. in all other dimensions

216 views • 11 slides

CARBORUNDUM INDUSTRIAL

CARBORUNDUM INDUSTRIAL. The New Surface Prep Belt Line. Joe Paquette & Paul Krupa July 2014. CARBORUNDUM FIBRATEX SURFACE CONDITIONING BELTS. Features. Benefits. Smear-free surfaces Great for aerospace alloys, high nickel and aluminum alloys C onsistent , repeatable finish

285 views • 10 slides

NCSX Mod Coil C1 features requiring rework at PPPL

NCSX Mod Coil C1 features requiring rework at PPPL. This report focuses on the issues that could delay the start of coil winding and may require rework. Additional inspection(s) with the focus on FPA and Machine Assy should be performed.

216 views • 10 slides

Connecting Rods

2.44k views • 9 slides

Task 3

Task 3.

216 views • 8 slides

206 views • 7 slides

PCD-Information

PCD-Information. Application, Economy and Limits of PCD-Tools. Light-Metals Aluminium and its alloys Magnesium and its alloys MMC. What Can Be Machined With PCD ?. Non-Ferrous Metals Brass-Alloys Bronze Copper-Alloys Carbide. Non-Metals Wood Reinforced Plastics Graphite Ceramics.

294 views • 7 slides

FRICTION measurements

FRICTION measurements. Friction force is partly caused by adhesive contacts. These contacts depend on the type of material, surface finish of the mating surfaces, and many other factors.

126 views • 4 slides

Choosing a Surface Finish

Function. Tolerance Considerations. Part Use. Component Strength. Is a smooth surface required? (Examine if/what the part surface might be in contact with, how does this affect the component?). Determine How Surface Finish Will Effect The Materials Strength.

129 views • 1 slides