'Signal routing' presentation slideshows

Prototype

Prototype. Production Design. One of a kind or few of a kind Represents abstract of production design Typically Thru Hole Components Cost is not part of requirements allocation Assembly process is not of interest Assembly levels, PCBs do NOT match PD

840 views • 67 slides

Prototype

Prototype. Production Design. One of a kind or few of a kind Represents abstract of production design Typically Thru Hole Components Cost is not part of requirements allocation Assembly process is not of interest Assembly levels, PCBs do NOT match PD

1.06k views • 67 slides

Manufacturing Processes

Manufacturing Processes. Printed Circuit Board Assembly (PCB): Must specify or account for all components mounted into, onto or attached in some way to a printed circuit board as well as test for same

805 views • 48 slides

Manufacturing Processes

Manufacturing Processes. Printed Circuit Board Assembly (PCB): Must specify or account for all components mounted into, onto or attached in some way to a printed circuit board as well as test for same

579 views • 48 slides

Manufacturing Processes

Manufacturing Processes. Printed Circuit Board Assembly (PCB): Must specify or account for all components mounted into, onto or attached in some way to a printed circuit board as well as test for same

434 views • 43 slides

FSSR2 Hybrid PCB Review

FSSR2 Hybrid PCB Review. January 17, 2013 Matthew Jones. FSSR2 Hybrid PCB Review. Dimensions: 70 mm x 75 mm Layers: 4 Minimum trace width: 0.0762 mm (3 mil) Minimum spacing: 0.0762 mm (3 mil) Via drill: 0.2032 mm (8 mil). FSSR2 Hybrid PCB Review. Board stackup :

457 views • 28 slides

Ground and Power Planes

Ground and Power Planes. Chris Allen (callen@eecs.ku.edu) Course website URL people.eecs.ku.edu/~callen/713/EECS713.htm. Ground planes. Ground planes were assumed in previous discussions discussion on vias layer stack up (MCMs) microstrip and stripline transmission line

481 views • 26 slides

Ground and Power Planes

Ground and Power Planes. Chris Allen (callen@eecs.ku.edu) Course website URL people.eecs.ku.edu/~callen/713/EECS713.htm. Ground planes. Ground planes were assumed in previous discussions discussion on vias layer stack up (MCMs) microstrip and stripline transmission line

307 views • 26 slides

Gate array design

368 views • 24 slides

Gate array design

581 views • 24 slides

Good Power Bus Routing Bypass Caps Closest to IC Power Pins

Signal Routing is Important! The PCB is part of the circuit. Good Signal Routing Equal Lengths, Uniform. Good Power Bus Routing Bypass Caps Closest to IC Power Pins. Poor Power Routing Bypass Caps and 1 Conductor too Lengthy. Poor Signal Routing Un-Equal Lengths, Non-uniform.

206 views • 13 slides

DSP Design Flow System Generator for DSP

DSP Design Flow System Generator for DSP. Course Agenda. Objectives. Identify Xilinx FPGA features that lend to high-performance DSP design Describe the System Generator design flow Understand the basics of Simulink List various Xilinx blocks available for basic design capture

327 views • 6 slides