1 / 20

ComAp Protection Relays and Generator Controllers | Grid Protection

Protection Relays Australia offers the new and best selling products ComAp Protection Relays and Generator Controller. Visit our website to know the different ComAp Relays with their different functions.

protectionrelays
Download Presentation

ComAp Protection Relays and Generator Controllers | Grid Protection

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. ComApPROTECTION RELAYS AND GENERATOR CONTROLLERS Protection Relays Australia

  2. COMAP INTELIGEN NT BASEBOX • Comprehensive gen-set controller for both single and multiple gensets operating in standby or paralleling modes. • To be used in conjunction with detachable colour displays InteliVision 5 or InteliVision 8 Support of engines with ECU (Electronic Control Unit). • Complete integrated gen-set solution and signal sharing via CAN bus – minimum external components needed. • Many communication options – easy remote supervising and servicing. • Gen-set performance log for easy problem tracingAutomatic synchronizing and power control (via speed governor or ECU). • AMF function, Base load, Import / Export, Peak shaving, Voltage and PF control (AVR).

  3. COMAP INTELIMAINS NT BASEBOX • For multiple up to 31 gen-sets operating in parallel to mains (or isolated parallel). • To be used in conjunction with detachable colour displays InteliVision 5, InteliVision 5 RD or InteliVision 8. • Import/export power control of the gen-set group; many different power control modes available. • Reverse synchronization of the loaded gen-set group to mains. • Coupling of several synchronized mains to a common bus. Allows to build complex applications with more mains incomers, bus-tie breakers etc.

  4. COMAP INTELIMAINS NTC BASEBOX • For multiple up to 31 gen-sets operating in parallel to mains (or isolated parallel). • To be used in conjunction with detachable colour displays InteliVision 5, InteliVision 5 RD or InteliVision 8 • Many different power control modes availableSystem Baseload with limited export or minimal import • Import/Export power control of gen-set group • Temperature of the system by power control • Dynamic changes of required system power via analog input • Reverse synchronization of the loaded gen-set group to mains • Forward synchronization of Mains to gen-set groupCoupling of several synchronized mains to a common bus • Allows to build complex applications with more mains incomers, bus-tie breakers, load management etc.

  5. COMAP INTELIPRO • The ComAp InteliPro is often used as a Zero-Export Relay for solar applications. • InteliPro is highly flexible mains decoupling relay with extensive range of protective functions to meet the strictest utility interconnection requirements. It can be used in various distributed generation applications, cogeneration units, renewable energy sources or as a redundant/back-up protection for gen-sets.

  6. COMAP INTELISYS NTC BASEBOX • Premium gen-set controller for both single and multiple gensets operating in standby or parallel modes • Support of cogeneration (CHP) and other complex applications • To be used in conjunction with detachable colour displays InteliVision 8 or InteliVision 5  • Support of engines with ECU (Electronic Control Unit) • Complete integrated gen-set solution and signal sharing via CAN bus – minimum external components needed • Many communication options – easy remote supervising and servicing • Gen-set performance log for easy problem tracingAutomatic synchronizing and power control (via speed governor or ECU) • Baseload, Import / Export, Temp By Power, Peak shaving, Voltage and PF control (AVR)

  7. COMAP INTELISYS NTC GAS GENSET CONTROLLER • The InteliSys Gas is an industrial grade controller for gas generating sets mainly used in CHP (Cogeneration) and power generation applications. The InteliSys Gas controls, monitors and protects the generator set according defined set points and its configuration. • Preconfigured functions, scalable and configurable I/Os, large built-in PLC interpreter, broad communication capabilities and an easy-to-change software allows to adapt the controller to various applications with minimum effort. • The InteliSys Gas and its accessories gives you the perfect solution for your Gas generating set application. You will get the products and related services out of one hand.

  8. COMAP INTELISYS NTC GAS GENSET CONTROLLER • Complete control of the generating set, including engine, alternator and related technology from one device - saving costs and space in switchboard and represents single point of data storage for easier commissioning and troubleshooting. • Predefined gas engine specific functions saves your time during the system configuration. Interface to both mechanical engines via sensors (resistive, voltage, current) and electronic engines with ECU type of control. One controller can handle various types of engines. • Interface to ECUs and other on-engine products like Ignitions, Mixers, Speed Governors, Detonation controllers significantly improves the system diagnostics and helps to save the engine down-time period.

  9. COMAP INTELISYS NTC GAS GENSET CONTROLLER • Compliant to various Grid codes requirements, including ENTSO-e without need for an extra Protection relay. This saves your money, space in the switchboard and keeps the system simple. • Local and Remote monitoring of the complete controlled technology over Plug & Play Displays, PC tools and Web based Fleet monitoring tools significantly reduce system commissioning time and allows you to monitor your gen-set fleet constantly. • Large built-in PLC interpreter allows you to configure the needed logic (e.g. CHP) on your own without extra programing knowledge. This allows you to react quickly to customer requirements and keep your valuable know-how in your hands.

  10. COMAP INTELISYS NTC HYBRID SYSTEM CONTROLLER • InteliSys NTC Hybrid is a controller for applications that combine gen-sets with a renewable source of power. It continuously monitors data from all sources of energy including solar, wind, gen-sets and batteries. • The Dynamic Spinning Reserve function allows the controller to adjust the output from the gen-sets according to the output of the renewable source. So, if the power output from the renewable source begins to drop, the controller automatically starts the gen-sets to ensure no drop in energy production from the system. • InteliSys NTC Hybrid communicates over CAN bus with ComAp gen-set controllers which manage outputs from gen-sets of different installed capacity and various manufacturers. Smart power management automatically select the most efficient combination of gen-sets based on their sizes to maximize fuel savings. • InteliSys NTC Hybrid provides interface to phovoltaic inverters with respect to the gen-sets minimum loading level. If the gen-set output approaches the allowed minimum, the InteliSys NTC Hybrid regulates the inverter output to prevent the engine from running underloaded.

  11. COMAP INTELIVISION HMI 12.1IN DETACHABLE COLOUR DISPLAY • InteliVision 12Touch, industrial operator panel equipped with 12,1” colour, multi-touch screen, is dedicated together with the main ComAp controller to visualise and control single gen-set in various applications. • 12,1" colour, multi-touch screen, TFT display unit with resolution of 1280 x 800 pixels • Touch based Graphical User Interface, support for multi-touch gestures • Plug and Play operation (auto configuration based on controller application)

  12. COMAP INTELIVISION HMI 12.1IN DETACHABLE COLOUR DISPLAY • Supported controllers : • InteliSys GAS • InteliGen NT BaseBox • InteliGen NTC BaseBox • InteliSys NTC BaseBox • InteliMains NTC BaseBox • InteliSys NTC Hybrid • Complete access to all control and monitoring functions. Fast and intuitive navigation

  13. COMAP INTELIVISION HMI 17IN COLOUR TOUCH DISPLAY • The new InteliVision 17Touch is 17“ Touchscreen display unit designed for complete monitoring and control of multiple controllers or cogeneration installation. • HARDWARE FEATURES: • 17" touch SXGA (1280x1024) TFT LCD Display with LED backlight • Intel Celeron 827E Processor, Fanless Cooling System • IP-65 NEMA 4 Aluminum Die Cast Front Bezel • Two easy access front USB ports • Over and under voltage protection • Polarity protection • Extended temperature range from -20 up to 60° • UL certified

  14. COMAP INTELIVISION HMI 17IN COLOUR TOUCH DISPLAY • SOFTWARE FEATURES • InteliMonitor / IGS-LOG (included for free) • Multiple controllers monitoring • Mode change feature for any connected controller • Start/Stop any connected gen-set manually • Control/Monitor of all GCBs / MCBs controlled by ComAp units • Set points configurable from one device • History logs of all controllers • Full screen mode with lock protection / PIN • Onscreen keyboard

  15. COMAP INTELIVISION HMI 5.7IN TFT COLOUR DISPLAY • InteliVision 5, industrial operator panel equipped with 5,7” colour screen, is dedicated together with the main ComAp controller to visualize and control single gen-set in various applications. • 5,7” Colour TFT Display with resolution 320 × 240 pixelsLocal and Remote display for single controller monitoringPlug and play operation (auto configuration based on controller application)

  16. COMAP INTELIVISION HMI 5.7IN TFT COLOUR DISPLAY • Supported controllers : • InteliSys GAS • InteliGen NT BaseBox • InteliGen NTC BaseBox • InteliSys NTC BaseBox • InteliMains NTC BaseBox • InteliSys NTC Hybrid

  17. COMAP INTELIVISION HMI 8IN TFT COLOUR DISPLAY • InteliVision 8, industrial operator panel equipped with 8” colour screen, is dedicated together with the main ComAp controller to visualize and control single gen-set in various applications. • 8" colour TFT display with resolution of 800 x 600 px • PLUG and PLAY operation (auto configuration based on controller application)

  18. COMAP INTELIVISION HMI 8IN TFT COLOUR DISPLAY • Supported controllers : • InteliGen NT BaseBox • InteliGen NTC BaseBox • InteliSys NTC BaseBox • InteliMains NTC BaseBox • InteliSys NTC Hybrid • InteliDrive DCU • InteliDrive DCU Marine • InteliDrive Mobile • InteliDrive Mobile Logger

  19. COMAP MAINSPRO • The ComAp MainsPro is a solar protection relays suitable for anti-islanding protection for installations over 30kW. • The ComAp MainsPro is a protection relay for mains-to-parallel applications, including generator sets, cogeneration, micro turbines or renewable energy sources such as photovoltaic plants or wind turbines. • It provides adjustable voltage, frequency and loss of mains protections to safeguard both the distribution network and the generators.

  20. For More Info About Our ProductsVisit us here: www.protectionrelays.com.au

More Related