1 / 39

Selecting and Wiring Flowers

Selecting and Wiring Flowers. Wiring Techniques . essential to the floral designer only wire a flower if it cannot be used satisfactorily without it. Reasons for Wiring. straighten slightly crooked stems support weakened stems keep flowers upright and help prevent wilting

pomona
Download Presentation

Selecting and Wiring Flowers

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Selecting and Wiring Flowers

  2. Wiring Techniques • essential to the floral designer • only wire a flower if it cannot be used satisfactorily without it

  3. Reasons for Wiring • straighten slightly crooked stems • support weakened stems • keep flowers upright and help prevent wilting • hold flowers and foliage in a desired position

  4. Reasons • prevent flower heads from breaking off the stem • replace flower stems on corsages so the corsage stem is not bulky • add accessories to corsages and arrangements

  5. Selecting wires • commonly sold in twelve pound boxes • wires 18 inches long • number of wires per box varies according to the size of the wire

  6. Selecting wires • coated with green enamel • helps prevent rusting • makes them less noticeable in the design

  7. Selecting wires • may be purchased on spools for special needs such as making garlands or wreaths

  8. Sizes of wire • Diameter measured in gauges • size ranges from 18 - thickest, to 32 – thinnest • 20-26 gauge is the most common

  9. Sizes of wire • proper size is important • too large a wire will damage the flower • too thin the flower will not be supported

  10. Sizes of wire • select the smallest wire that will support the flower and still hold it in place

  11. Methods of wiring • straight wire method • used when the stem remains attached to the flower • most often used when wiring flowers for vase arrangements

  12. Straight Wire • hold a piece of 20 gauge wire about one half inch from the end • insert into the calyx - fleshy part of the flower below petals

  13. Straight wire • push wire up toward your finger • wrap the wire carefully around the stem going between the leaves • wire should show as little as possible

  14. Hook Method • used on daisies, asters, chrysanthemums and other flowers used for corsages and funeral work • method is recommended for any flower that breaks easily at the stem

  15. Hook Method • hook helps prevent flower from breaking off of stem • stem may be removed or left intact • depends on use of flower

  16. Hook Method • for corsage work, stem is cut 1/2 inch below the calyx • all remaining foliage is removed from stem

  17. Hook Method • wire is pushed up through the calyx and out the top of the flower • wire may also be pushed along the center of the stem

  18. Hook Method • bend end of wire that sticks out top of flower into a hook • pull the wire and the hook downward so that the hook disappears into the flower head

  19. Hook Method • if using the flower in a corsage, it is now ready to be taped • if using in an arrangement, wire is bent around stem to support it

  20. Piercing method • used on flowers that have an enlarged calyx • such as carnations and roses • stem is removed about one inch below calyx if for corsage

  21. Piercing method • insert a wire through the calyx at a point halfway between the calyx and the petals

  22. Piercing method • if for a vase arrangement, push wire till it sticks two inches beyond the calyx • bend both ends of wire down • wrap longest end around stem

  23. Piercing method • for corsage, push the wire through to the midpoint • bend both sides down and tape

  24. Wrap method • used on foliage made of many small leaflets • leatherleaf • flowers composed of many small florets

  25. Wrap method • cut the stem so that a small portion of the stem remains on the leaf • make a hairpin from 26-28 gauge wire

  26. Wrap method • hang the hairpin over the lowest pair of leaflets so that the bend in the hairpin rests behind the stem

  27. Wrap method • wind one wire over both the other wire and the stem of the leaflet • wrap the stem and wire with tape

  28. Stitch method • used most commonly on broad, leathery skinned leaves • foliages that have been wired are much easier to use because the wire creates an extended petiole

  29. Stitch method • from the back side of the leaf, take a 26 gauge wire and pass the wire through the leaf under the midrib • stitch is made about halfway up the leaf

  30. Stitch method • bend both ends of the wire down the back of the leaf • wrap one half of the wire around the other half and the petiole several times

  31. Stitch method • tape the stem beginning at the base of the leaf

  32. Wiring • it is important to select the method that best suits the type of flower and its intended use • keep all wire hidden as much as possible

  33. Floral Taping • non sticky tape that will stick to itself when stretched • used primarily in corsage work to cover wires • bind wires to flower stems

  34. Floral Taping • bind wired or taped flowers together • half inch width is the most common • one inch is also made but is not readily available

  35. Floral Taping • primary brand names are “Floratape” and “Parafilm” • various colors available • moss green and foliage green are the most common

  36. Floral Taping • white tape is used in wedding work while brown may be used for dried flowers • taping requires skill that is developed with practice

  37. Floral Taping • taping is achieved by stretching the tape as you wrap it around the stem or wire or twist the wire or stem into the floral tape

  38. Floral Taping • the tape becomes sticky as you stretch it and will stick to itself • properly taped wires will be smooth and lightly taped

  39. Floral Taping • if the tape does not adhere to the wire and is loose, increase the tension on the tape.

More Related