What are Hydraulically Bound Materials (HBM)?

1. What are Hydraulically Bound Materials (HBM)? HBM is short for Hydraulically Bound Materials. These are solid materials that rely on some type of binder to hold them together. Those materials are then going to dry and harden due to the reaction they have to water and certain chemicals found in the mix. The right chemicals and the right ratio of ingredients can be quite complex. They have to be accurate in order to create the right consistency for a given project. They have to have the right balance of materials so they will dry properly and last over time. The goal is to create something that is strong and won’t need to be repaired or replaced at any time soon. Starting with quality dry ingredients is an important step in getting that desired outcome. Types of Binders There are several different types of binders, and what is used depends on several factors. What the desired outcome is, where the materials will be placed, and their overall purpose all influence what is used. One of the most commonly used binders for HBM is cement. It is a dry powder, but when water is added to it, there is the thick gray substance.

2. As it dries, it will create a very hard substance that can be used for driveways, sidewalks, structures, and so much more. Other such binders that may be used for a project include gypsum, lime, and flash ash. The amount of such binders will influence consistency. The methods used to apply it and the equipment used will also influence the finish when it dries. Certain types of binders work better in given environments versus others. Factors such as the temperatures, the amount of moisture, and even how the project will be used all influence the type of binders to use. An expert is going to be able to share why the will recommend a certain type for a given project you have in mind. Work with an Expert It is always best to work with an expert when you need to use HBMs because of the complex nature of them. Without the right methods, experience, and certain equipment, it will be impossible to get the results you really need. An expert is able to help you by giving you an estimate for the cost involved. They can help you decide the best materials to use to create your desired outcome. They can go over the pros and cons as well as the total cost. Such details can help you to decide what you would like to continue with. Take your time to find such an expert and schedule a time for them to check to see your location area. There is no cost or obligation for them to assess it. In many scenarios, such as parking lots or other asphalt work, HBMs can be used to create the underlying layers. This will help to offer a strong structure, and it will reduce the cost for the additional finishing layers on top. There are quite a few options, but you need to gather information and verify the methods a provider will use before you agree to the work. Consider Recycled Materials Consider working with a provider that offers recycled materials with the HBMs. Such materials are less expensive and they help to reduce waste within the environment. Yet they can help you to get a great outcome with the completed project. There are more uses for recycled materials than ever before. You may have to check around to find a great provider that offers them. When consumers demand such materials, it will make a difference. It can encourage other providers to get on board with offering them too so they don’t lose business to their competitors. They should give you details including the percentage of the materials that will be recycled and how much of them will be new. About Us: At https://www.oclonline.co.uk you can learn more about our recycled materials. We are enthusiastic about promoting them because this type of recycling helps the environment. It saves resources while reducing the amount of materials that end up in our landfills. It is exciting to be a part of sharing information, offering materials, and getting the message out there. We all want great construction for our buildings and roads, but there is no reason to be wasteful with materials while doing so. Offering a better solution without reducing the effectiveness of the projects is what this method is all about.