1 / 8

Background

PW Stitching Procedures in MPLS-TP Networks draft-boutros-pwe3-ms-pw-tp-00 Sami Boutros Siva Sivabalan Luca Martini. Background. This draft extends the PW stitching procedures defined in “draft-ietf-pwe3-segmented-pw-15.txt” to include:-

myra-chaney
Download Presentation

Background

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. PW Stitching Procedures in MPLS-TP Networksdraft-boutros-pwe3-ms-pw-tp-00 Sami Boutros Siva Sivabalan Luca Martini

  2. Background • This draft extends the PW stitching procedures defined in “draft-ietf-pwe3-segmented-pw-15.txt” to include:- • Lock Instruct (LI) and Loopback (LB) OAM functions for MPLS-TP networks specified in“draft-boutros-mpls-tp-li-lb-00.txt”. • PW OAM messages for static PWs specified in “draft-ietf-pwe3-static-pw-status-00.txt”. • PW static FEC defined in “draft-nitinb-mpls-tp-on-demand-cv-00.txt”.

  3. LI on MPLS-TP LSP (1) PW 1 3 2 MPLS-TP LSP T-PE1 S-PE PW status (0x00000018) T-PE2 LI Request LI Reply • PW status can be sent via LDP or PW OAM depending on whether the PW is dynamic or static respectively • If PW status not supported, Label Withdraw method is used

  4. LI on MPLS-TP LSP (2) PW 2 1 3 MPLS-TP LSP PW status (0x00000018) T-PE1 S-PE T-PE2 LI Request LI Reply • Same as the previous case except that LI request originates at S-PE • If LI reply is negative, S-PE sends PW status 0x00000000 to T-PE2 to re-activate PW

  5. LI on PW PW 1 4 2 3 MPLS-TP LSP LI Request LI Request T-PE1 S-PE T-PE2 LI Reply LI Reply • LI request originating from T-PE1 is intended for S-PE. Upon receiving LI request, S-PE relays it to T-PE2. • If S-PE cannot relay LI request to T-PE2, it can use either PW status 0x00000018 or label withdraw method to bring down PW between itself and T-PE2

  6. LB on MPLS-TP LSP PW 1 3 2 MPLS-TP LSP T-PE1 S-PE PW status (0x00000018) T-PE2 LB Request LB Reply • Once MPLS-TP LSP between T-PE1 and S-PE is setup in LB mode, all PW traffic from T-PE1 to S-PE will be looped back to T-PE1

  7. LB on PW PW 1 3 2 MPLS-TP LSP LB Request T-PE1 S-PE PW status (0x00000018) T-PE2 LB Reply • Once PW between T-PE1 and S-PE is setup in LB mode, all PW traffic from T-PE1 to S-PE will be looped back to T-PE1

  8. Future Work • Align with MPLS-TP drafts Guidance:- • Rename to draft-boutros-pwe3-mpls-tp-ms-pw-00.txt • Include the paragraphs in http://wiki.tools.ietf.org/misc/mpls-tp/wiki/Boilerplate%20for%20MPLS-TP%20Internet-Drafts • Add new sub-TLV type to represent static PW FEC in S-PE TLV

More Related