1 / 48

Unified-PCMC Ver. 5.0 (TDE600 ver. 3 support)

Unified-PCMC Ver. 5.0 (TDE600 ver. 3 support). 2009/Dec/15 “Additional setting” is added. Table of improvements. Changing according to TDE600 v3 specification. Other changing on TDE600 v3 PCMC. Operation improvement/specification changing. Common tool specification changing.

megan
Download Presentation

Unified-PCMC Ver. 5.0 (TDE600 ver. 3 support)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Unified-PCMC Ver. 5.0 (TDE600 ver. 3 support) 2009/Dec/15 “Additional setting” is added

  2. Table of improvements

  3. Changing according to TDE600 v3 specification

  4. Other changing on TDE600 v3 PCMC

  5. Operation improvement/specification changing Common tool specification changing Additional setting

  6. Details of improvements

  7. Changing according to TDE600 v3 specification

  8. IPCS supported 1/8 1. V-IPCS4 Card Supported KX-NCP0158 (8ch IP-CS) Max. 16 IP-CS / system Max. 4 Slots / system

  9. IPCS supported 2/8 (1) Select CS Class: 2. Air Synchronization setting added 1. Master CS1. 11.5 Air Synchronization Master Clock supplier in IP-CS Group. 2. Master CS2. Sub-Master Clock supplier in IP-CS Group. While Master CS1 is working, it performs as Slave CS. 3. Slave CS. Other IP-CS in IP-CS group. You must set OUS for the IP-CS before the program (2) Set Index of Primary CS and secondary CS: Specify the IP-CS Index No. for Primary CS and Secondary CS. Slave CS (and Master CS2 also) needs to be specified other IP-CS nearer to the Master CS1 as the “Primary CS” for keeping the synchronization. “Secondary CS” is backup of “Primary CS” for failure of it.

  10. IPCS supported 3/8 (3) Example of typical IP-CS Configuration You need to consider the configuration of IP-CS different way from the configuration of traditional (wired) CS because IP-CS needs to keep sync to both PS and other CS (primary and secondary) by radio-wave. Impossible to program !

  11. IPCS supported 4/8 Traditional (wired) CS becomes automatically and always Master CS1 of the IP-CS network. Impossible to program !

  12. IP Network IPCS supported 5/8 3. V-IPCS4 firmware FTP Download supported FTP sever For example: ftp://2045:G$HIA&C@mailftp.jp.panasonic.com/ Telephone network New Software By Modem Dealer Office Customer Office By RS-232C (2) Download new software from FTP server automatically. (1) Inform FTP address. By LAN IP-CS NT400 1. Remote update by mode. 2. On-site update by RS-232C. 3. Update by LAN.

  13. IPCS supported 6/8 V-IPCS4 firmware updating operation procedure 1/2 If no IP-CS is installed, Error code E000307 If some IP-CS is installed, Next page…

  14. IPCS supported 7/8 V-IPCS4 firmware updating operation procedure 2/2 Step5: press “Execute” to start updating. Step1: input URL and File Name. Step2: press “Load” button. Step3: check the version of new software in FTP server. Step6: You need to press “Refresh ” to confirm the update result and version several times manually to confirm the end of process. No automatic display at the end of the process. Step4: select destination IP-CS. INS/OUS both status is Okay.

  15. IPCS supported 8/8 V-IPCS4 firmware timed update setting Step5: press “Timed Update” instead of “Execute”

  16. Hotel Enhancement Sales Company Mode (*1) Reserved bit 07-7 Enable : 10,000/8,000 mode Disable : 20,000/4,000 mode (Default)

  17. 128 IP-PT supported 1/2

  18. 128 IP-PT supported 2/2

  19. Add the setting for “Conference with Broadcast” 1/2 2.9 System Options - Option5 Broadcast mode 8-party Conference mode

  20. N/A Owner Two-way Max. 7 Members One way N/A Owner Two-way One way Max. 31 Members Owner Two-way Max. 7 Members One way Max. 24 Members Add the setting for “Conference with Broadcast” 2/2 8-Party Conference Mode Broadcast Mode The Owner can control local PBX members.

  21. Strengthening security 1/2 1. Hide Password for all screens. 1) Quick Setup - Step 1 - System Password 2) Quick Setup - Step 1 - Re-enter System Password Password is hidden

  22. Strengthening security 2/2 3) Port Property - Virtual SIP Gateway - Account -Authentication Password (Batch mode only) 1.1 Slot - V-SIPGW16 – Port Property Interactive mode Authentication Password is displayed Batch mode Authentication Password is hidden

  23. Enhancement of SIP Trunk 1/3 Select the provide setting from the current SIP Port settings 1. Enhance of SIP Provider . 1) Add Provider button. 1.1 Slot - V-SIPGW16 – Port Property Selected provider setting will be exported and added to the “Provider.csv” file

  24. Enhancement of SIP Trunk 2/3 2) Provider file enhancement. All settings except "Subscriber Number" and "Account" Tab of "Port Property - Virtual SIP Gateway" are recorded to Provider.csv file.

  25. Enhancement of SIP Trunk 3/3 2. Add the port parameter for V-SIPGW . 1.1 Slot - V-SIPGW16 – Port Property Total 32 option bits for each port of V-SIPGW. Currently no specific definition, but for the future enhancements.

  26. IP-GW setting (GW entry max 512->100) 1.1 Slot - V-IPGW16 - GW Settings Max entry became 100

  27. MOH (High Quality MOH supported) 1/2 2.2 Operator & BGM From the difference of the hardware structure, item and selectable value are slightly different between TDE and NCP

  28. MOH (High Quality MOH supported) 2/2 6.6 Tenant From the difference of the hardware structure, item and selectable value are slightly different between TDE and NCP

  29. ICD Group max. 32 -> 128 3.5.3 Miscellaneous Previously this item appears only for the PCMC of sales company mode. But from this version, this item, appears for installer mode too. And the default value of ICD Group is expanded to 128.

  30. Operation improvement / specification changing

  31. Copy button for all Extension data 1. Add "Copy to" function 2. Change Copy GUI Selectable copy data

  32. Improvement of FWD/DND setting 1. Change GUI like CA 2. Add "Copy to" function Common I/F for Copying … - Extension Data - FWD/DND - Speed Dial - Flexible Buttons Old GUI

  33. Improvement of ICD Group FWD setting 1. Can change ICD Group Forward from PCMC 2. Add “Group FWD" function Same GUI design with Extension FWD/DND setting

  34. Improvement of Flexible buttonsetting 1/2 1. Extension Number/Name list is displayed by the numerical order. Previously, the display order was slot order. And it was very difficult to find the target extension from the list. Now it is easy to find !

  35. Improvement of Flexible buttonsetting 2/2 1. Separate Number and Name input column. 2. Extension number input method Pull-down listDirect Input Direst input 121 New GUI Separate Number & Name Extension Number & Name Old GUI Pull-down list

  36. Common tool specification changing

  37. PBX Replacement update TDE100/200 V2.0 TDE600 V3.0 TDA600 V5.0 TDE600 V3.0

  38. All PCMC version display in "Unified PBX - About" UPCMC version For example: TDA30 modules in this UPCMC are them All the installed PCMC modules for each model. (same display that you have seen at the Installer)

  39. Support TDE600 by PBX Web Manager

  40. Automatic PBX IP Address Search 1/2 1. Add “Search” button at LAN connection screen. 2. Useful if PBX is set as DHCP mode and can not know its IP address. In case found In case not found

  41. Automatic PBX IP Address Search 2/2 PBX Search protocol. PBX found PBX not found PCMC PBX PCMC PBX Broadcast Broadcast Wait 2s Wait 2s Broadcast Broadcast Wait 2s Wait 2s Broadcast Broadcast Total 10s 1st Response (IP Address) Wait 2s Wait 2s Stop Broadcast Wait 2s Broadcast PCMC software keeps waiting for the response from multiple PBX in this period up to receiving 257th of PBX or coming of timeout(2s) Wait 2s Stop Broadcast

  42. Additional setting

  43. Additional VoIP-DSP Option 1/5 1. Added parameters NEW

  44. Additional VoIP-DSP Option 2/5 2. Common background The following value and setting is different between the VoIP devices (V-SIPGW, V-SIPEXT, V-IPEXT, V-IPGW). (A) The DSP power-resources which is reserved for conversion of CODEC. (B) The method of selecting (selection algorithm) the CODEC. From this situation, you can face the following situation. (1) Sometimes undesired CODEC is used after the negotiation with the communicating devices. (2) Depending on the selected CODEC, you can face the disconnection of the call from the lack of the DSP power-resources. The newly added 3 parameters are aiming to reduce the risk of those possible technical problem by fixing the CODEC on each VoIP device.

  45. Additional VoIP-DSP Option 3/5 3. Explanation of each parameter 3-1. DSP CODEC G.711 Only (SIP Extension) The algorithm of the negotiation on the codec of the SIP Phone for the incoming call is various by depending on the design of the telephone manufacturers. Therefore, it is difficult to control CODEC with priority for the incoming call process by the PBX side (like PBX can do it for IP-PT). When this parameter is set as Enable, PBX performs as followings to improve the above mentioned point. (1) PBX permits only G.711 CODEC for the incoming call (PBX -> SIP-Extension). (Please note that the call will be dropped if SIP Phone doesn't support G.711 in local setting) (2) PBX follows to the CODEC selection on the SIP-Extension side for the outgoing call (SIP-Extension -> PBX) as usual.

  46. Additional VoIP-DSP Option 4/5 3-2. DSP CODEC G.711 Only (IPGW) Our V-IPGW always reserves the maximum possibility of the DSP power-resources before starting of the conversation. By this reason, in the normal mode, V-IPGW request the DSP power-resources of G.729 without depending on the actual CODEC of the conversation or on the setting of the priority of CODEC. Therefore, the call on V-IPGW can very easily cause the lack of the DSP power-resources. When this parameter is set as Enable, PBX performs as followings to improve the above mentioned point. (1) PBX permits only G.711 CODEC for the outgoing call (V-IPGW -> other IGPW). (Please note that the call will be dropped if other IPGW doesn't support G.711 in the setting) (2) PBX follows to the CODEC selection of other IPGW side for the incoming call (other IPGW -> V-IPGW) as usual.

  47. Additional VoIP-DSP Option 5/5 3-3. DSP CODEC Priority-1 value Only (others) The meaning of others are V-SIPGW and V-IPEXT. By depending on the situation, the call on V-SIPGW and V-IPEXT can use the lower priority CODEC in normal situation. When this parameter is set as Enable, PBX performs as followings to improve the above mentioned point. (1) PBX permits the highest priority CODEC for both the incoming call and the outgoing call of IP-Extension PBX permits the highest priority CODEC for both the incoming call and the outgoing call of V-SIPGW. (Please note that the call will be dropped if SIP Provider doesn't support highest priority CODEC of our PBX)

  48. Thank You Very Much For Your Attention “ We are Panasonic Family”

More Related