1 / 51

OBJECTIVES

OBJECTIVES. After studying Chapter 10, the reader will be able to: Prepare for Engine Repair (A1) ASE certification test content area “A” (General Engine Diagnosis). Explain how a four-stroke cycle gasoline engine operates.

Download Presentation

OBJECTIVES

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. OBJECTIVES After studying Chapter 10, the reader will be able to: • Prepare for Engine Repair (A1) ASE certification test content area “A” (General Engine Diagnosis). • Explain how a four-stroke cycle gasoline engine operates. • List the various characteristics by which vehicle engines are classified. • Discuss how a compression ratio is calculated. • Explain how engine size is determined. • Describe how turbocharging or supercharging increases engine power.

  2. ENERGY AND POWER • Energy is used to produce power. • The chemical energy in fuel is converted to heat by the burning of the fuel at a controlled rate. • This process is called combustion. If engine combustion occurs within the power chamber, the engine is called an internal combustion engine.

  3. ENGINE CONSTRUCTION OVERVIEWBlock • All automotive and truck engines are constructed using a solid frame, called a block. • A block is constructed of cast iron or aluminum and provides the foundation for most of the engine components and systems.

  4. ENGINE CONSTRUCTION OVERVIEWRotating Assembly • Pistons are installed in the block and move up and down during engine operation. FIGURE 10-1 The rotating assembly for a V-8 engine that has eight pistons and connecting rods and one crankshaft.

  5. ENGINE CONSTRUCTION OVERVIEWCylinder Heads • All engines use a cylinder head to seal the top of the cylinders, which are in the engine block. • The cylinder head also contains valves that allow air and fuel into the cylinder, called intake valves and exhaust valves, which open after combustion to allow the hot gases left over to escape from the engine.

  6. ENGINE CONSTRUCTION OVERVIEWCylinder Heads FIGURE 10-2 A cylinder head with four valves per cylinder, two intake valves (larger) and two exhaust valves (smaller).

  7. ENGINE CONSTRUCTION OVERVIEWIntake and Exhaust Manifolds • Air and fuel enters the engine through an intake manifold and exits the engine through the exhaust manifold.

  8. ENGINE CONSTRUCTION OVERVIEWCooling System • All engines must have a cooling system to control engine temperatures. FIGURE 10-3 The coolant temperature is controlled by the thermostat which opens and allows coolant to flow to the radiator when the temperature reaches the rating temperature of the thermostat.

  9. ENGINE CONSTRUCTION OVERVIEWLubrication System • All engines contain moving and sliding parts that must be kept lubricated to reduce wear and friction. FIGURE 10-4 A typical lubrication system, showing the oil pan, oil pump, oil filter, and oil passages.

  10. ENGINE CONSTRUCTION OVERVIEWFuel System and Ignition System • All engines require fuel and an ignition system to ignite the fuel–air mixture in the cylinders. • The fuel system includes the following components: • Fuel tank where fuel is stored • Fuel filter and lines • Fuel injectors

  11. FOUR-STROKE CYCLE OPERATION • Most automotive engines use the four-stroke cycle of events, begun by the starter motor which rotates the engine. • The four-stroke cycle is repeated for each cylinder of the engine. • Intake stroke • Compression stroke • Power stroke • Exhaust stroke

  12. FOUR-STROKE CYCLE OPERATION FIGURE 10-5 The downward movement of the piston draws the air–fuel mixture into the cylinder through the intake valve on the intake stroke. On the compression stroke, the mixture is compressed by the upward movement of the piston with both valves closed. Ignition occurs at the beginning of the power stroke, and combustion drives the piston downward to produce power. On the exhaust stroke, the upward-moving piston forces the burned gases out the open exhaust valve.

  13. FOUR-STROKE CYCLE OPERATIONCONT

  14. FOUR-STROKE CYCLE OPERATION FIGURE 10-6 Cutaway of an engine showing the cylinder, piston, connecting rod, and crankshaft.

  15. THE 720° CYCLE • Each cycle of events requires that the engine crankshaft make two complete revolutions or 720° (360° 2 720°). • The greater the number of cylinders, the closer together the power strokes occur.

  16. THE 720° CYCLE • Angle with three cylinders = 720°/3 = 240° • Angle with four cylinders = 720°/4 = 180° • Angle with five cylinders = 720°/5 = 144° • Angle with six cylinders = 720°/6 = 120° • Angle with eight cylinders = 720°/8 = 90° • Angle with ten cylinders = 720°/10 = 72°

  17. ENGINE CLASSIFICATION AND CONSTRUCTION • Engines are classified by several characteristics including: • Number of strokes • Cylinder arrangement • Longitudinal or transverse mounting • Valve and camshaft number and location • Type of fuel • Cooling method • Type of induction pressure

  18. ENGINE CLASSIFICATION AND CONSTRUCTION FIGURE 10-7 Automotive engine cylinder arrangements.

  19. ENGINE CLASSIFICATION AND CONSTRUCTION FIGURE 10-8 A horizontally opposed engine design helps to lower the vehicle’s center of gravity.

  20. ENGINE CLASSIFICATION AND CONSTRUCTION FIGURE 10-9 A longitudinally mounted engine drives the rear wheels through a transmission, driveshaft, and differential assembly. FIGURE 10-10 Two types of frontengine, front-wheel drive.

  21. ENGINE CLASSIFICATION AND CONSTRUCTION FIGURE 10-11 Cutaway of a V-8 engine showing the lifters, pushrods, roller rocker arms, and valves.

  22. ENGINE CLASSIFICATION AND CONSTRUCTION FIGURE 10-12 SOHC engines usually require additional components such as a rocker arm to operate all of the valves. DOHC engines often operate the valves directly.

  23. ENGINE CLASSIFICATION AND CONSTRUCTION FIGURE 10-13 A dual overhead camshaft (DOHC) V-8 engine with part of the cam cover cut away.

  24. WHAT IS A ROTARY ENGINE? • A successful alternative engine design is the rotary engine, also called the Wankel engine after its inventor. • The Mazda RX-7 and RX-8 represents the only longterm use of the rotary engine.

  25. WHAT IS A ROTARY ENGINE? FIGURE 10-14 Rotary engine operates on the four-stroke cycle but uses a rotor instead of a piston and crankshaft to achieve intake, compression, power, and exhaust stroke.

  26. ENGINE ROTATION DIRECTION • The SAE standard for automotive engine rotation is counterclockwise (CCW) as viewed from the flywheel end (clockwise as viewed from the front of the engine). FIGURE 10-15 Inline four-cylinder engine showing principal and nonprincipal ends. Normal direction of rotation is clockwise (CW) as viewed from the front or accessory belt end (nonprincipal end).

  27. BORE • The diameter of a cylinder is called the bore. • The larger the bore, the greater the area on which the gases have to work. FIGURE 10-16 The bore and stroke of pistons are used to calculate an engine’s displacement.

  28. STROKE • The distance the piston travels down in the cylinder is called the stroke. • The longer this distance is, the greater the amount of air–fuel mixture that can be drawn into the cylinder.

  29. ENGINE DISPLACEMENT • Engine size is described as displacement. • Displacement is the cubic inch (cu. in.) or cubic centimeter (cc) volume displaced or swept by all of the pistons. • The formula to calculate the displacement of an engine is basically the formula for determining the volume of a cylinder multiplied by the number of cylinders. • Bore x bore x stroke x 0.7854 x number of cylinders

  30. COMPRESSION RATIO • The compression ratio of an engine is an important consideration when rebuilding or repairing an engine. • Compression ratio (CR) is the ratio of the volume in the cylinder above the piston when the piston is at the bottom of the stroke to the volume in the cylinder above the piston when the piston is at the top of the stroke.

  31. COMPRESSION RATIO FIGURE 10-17 Compression ratio is the ratio of the total cylinder volume (when the piston is at the bottom of its stroke) to the clearance volume (when the piston is at the top of its stroke).

  32. COMPRESSION RATIO FIGURE 10-18 Combustion chamber volume is the volume above the piston with the piston at top dead center.

  33. THE CRANKSHAFT DETERMINES THE STROKE • The stroke of an engine is the distance the piston travels from top dead center (TDC) to bottom dead center (BDC). • This distance is determined by the throw of the crankshaft. FIGURE 10-19 The distance between the centerline of the main bearing journal and the centerline of the connecting rod journal determines the stroke of the engine. This photo is a little unusual because this is from a V-6 with a splayed crankshaft used to even out the impulses on a 90°, V-6 engine design.

  34. TORQUE • Torque is the term used to describe a rotating force that may or may not result in motion. • Torque is measured as the amount of force multiplied by the length of the lever through which it acts. FIGURE 10-20 Torque is a twisting force equal to the distance from the pivot point times the force applied expressed in units called pound-feet (lb-ft) or Newton-meters (N-m).

  35. POWER • The term power means the rate of doing work. • Power equals work divided by time. • Work is achieved when a certain amount of mass (weight) is moved a certain distance by a force.

  36. HORSEPOWER AND ALTITUDE • Because the density of the air is lower at high altitude, the power that a normal engine can develop is greatly reduced at high altitude.

  37. SUMMARY • The four strokes of the four-stroke cycle are intake, compression, power, and exhaust. • Engines are classified by number and arrangement of cylinders and by number and location of valves and camshafts, as well as by type of mounting, fuel used, cooling method, and induction pressure.

  38. SUMMARY • Most engines rotate clockwise as viewed from the front (accessory) end of the engine. The SAE standard is counterclockwise as viewed from the principal (flywheel) end of the engine. • Engine size is called displacement and represents the volume displaced or swept by all of the pistons.

  39. REVIEW QUESTIONS • Name the strokes of a four-stroke cycle. • If an engine at sea level produces 100 horsepower, how many horsepower would it develop at 6,000 feet of altitude?

  40. CHAPTER QUIZ • All overhead valve engines _____. • Use an overhead camshaft • Have the overhead valves in the head • Operate by the two-stroke cycle • Use the camshaft to close the valves

  41. CHAPTER QUIZ 2. An SOHC V-8 engine has how many camshafts? • One • Two • Three • Four

  42. CHAPTER QUIZ 3. The coolant flow through the radiator is controlled by the _____. • Size of the passages in the block • Thermostat • Cooling fan(s) • Water pump

  43. CHAPTER QUIZ 4. Torque is expressed in units of _____. • Pound-feet • Foot-pounds • Foot-pounds per minute • Pound-feet per second

  44. CHAPTER QUIZ 5. Horsepower is expressed in units of _____. • Pound-feet • Foot-pounds • Foot-pounds per minute • Pound-feet per second

  45. CHAPTER QUIZ 6. A normally aspirated automobile engine loses about _____ power per 1,000 feet of altitude. • 1% • 3% • 5% • 6%

  46. CHAPTER QUIZ 7. One cylinder of an automotive four-stroke cycle engine completes a cycle every _____. • 90° • 180° • 360° • 720°

  47. CHAPTER QUIZ • How many rotations of the crankshaft are required to complete each stroke of a four-stroke cycle engine? • One-fourth • One-half • One • Two

  48. CHAPTER QUIZ 9. A rotating force is called _____. • Horsepower • Torque • Combustion pressure • Eccentric movement

  49. CHAPTER QUIZ 10. Technician A says that a crankshaft determines the stroke of an engine. Technician B says that the length of the connecting rod determines the stroke of an engine. Which technician is correct? • Technician A only • Technician B only • Both Technicians A and B • Neither Technician A nor B

More Related