1 / 39

HCAL Test Beam Setup @ Fermilab

HCAL Test Beam Setup @ Fermilab. A(D)HCAL, ECAL and Tail Catcher in Test Beam User Areas MT6-B3 / B4. Content. AHCAL Layers HCAL Stack HCAL Movable Table HCAL Setup in Test Beam Area HCAL Stack and Tail Catcher HCAL Stack and ECAL HCAL Stack and DHCAL.

massimo-neeson
Download Presentation

HCAL Test Beam Setup @ Fermilab

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. HCAL Test Beam Setup@ Fermilab A(D)HCAL, ECAL and Tail Catcher in Test Beam User Areas MT6-B3/B4 Technical Review Meeting (extended version)

  2. Content • AHCAL Layers • HCAL Stack • HCAL Movable Table • HCAL Setup in Test Beam Area • HCAL Stack and Tail Catcher • HCAL Stack and ECAL • HCAL Stack and DHCAL Technical Review Meeting (extended version)

  3. AHCAL LayerTile 30(30 mm x 30 mm x 5 mm) scintillator mirror wavelength shifter silicon photo multiplier Technical Review Meeting (extended version)

  4. AHCAL Layer 1-30 (Tile geometry fine)100 x Tile 30 Area dimensions (x/y) 300 x 300 mm² Technical Review Meeting (extended version)

  5. AHCAL Layer 1-30 (Tile geometry fine)100 x Tile 30 + 96 x Tile 60 Area dimensions (x/y) 660 x 660 mm² Technical Review Meeting (extended version)

  6. AHCAL Layer 1-30 (Tile geometry fine)100 Tile 30 + 96 Tile 60 + 20 Tile 120 Tile area dimensions (x/y) 900 x 900 mm² Technical Review Meeting (extended version)

  7. AHCAL Layer 1-30 (Tile geometry fine) complete with spacers limited Scan Area 600 mm x 600 mm defined by Test Beam Area MT6-B3 based on DESY safety rules Technical Review Meeting (extended version)

  8. AHCAL Layer 1-30 (Tile geometry fine) all tiles in the Cassette frame Cassette frame max. dimensions (x/y/z) 1000 x 1000 x 12 mm³ Technical Review Meeting (extended version)

  9. AHCAL Layer 1-30 (Tile geometry fine) all tiles in the Cassette and cabled light fibres readout cables Technical Review Meeting (extended version)

  10. AHCAL Layer closed Cassette with electronic housing Calibration and Monitoring Board (suppressed) max. dimensions (x/y/z) 1000 x 100 x 28 mm³ Very Front end Electronic max. dimensions (x/y/z) 1000 x 300 x 28 mm³ Technical Review Meeting (extended version)

  11. AHCAL Layer between 2 absorber plates (steel) (suppressed CMB) VFE absorber plate dimensions (x/y/z) 1000 x 1000 x16 mm³ Technical Review Meeting (extended version)

  12. AHCAL Layer 1inside the complete Absorber Stack (suppressed CMB) Layer 1 38 pieces of 16 mm thick absorber plates with a 14 mm gap between the plates forms the Absorber Stack Technical Review Meeting (extended version)

  13. AHCAL StackLayer 1-38 inside the complete Absorber Stack Layer 1-38 (suppressed CMB) AHCAL Stack max. dimensions (x/y/z) 1400 x 1000 x 1140 mm³ Technical Review Meeting (extended version)

  14. AHCAL Stackmounted in the Stack Support (suppressed CMB) Stack Support max. dimensions (x/y/z) 2560 x 1300 x 1600 mm³ Technical Review Meeting (extended version)

  15. AHCAL Stackdismounting a Layer from the Stack horizontal (suppressed CMB) 2. Pull out Layer (Cassette with VFE) 1. Remove CMB Technical Review Meeting (extended version)

  16. AHCAL Stackdismounting a Layer from the Stack vertical (suppressed CMB) 3. lift Layer (Cassette with VFE) Technical Review Meeting (extended version)

  17. HCAL Movable Table (old version)with HCAL Stack Support (old version) Required Capabilities : +- 500 mm on x axis +- 500 mm on y axis + 35° around y axis + 90° around x axis Technical Review Meeting (extended version)

  18. HCAL Movable Table (old version) HCAL Stack Support (old version)in cosmic test mode Stack rotated by 90° around x-axis Technical Review Meeting (extended version)

  19. HCAL Movable Table (old version) HCAL Stack and beams IHEP beam height 2150 mm Fermilab beam height @ MTB-6 B3 1650 mm Technical Review Meeting (extended version)

  20. HCAL Movable Table (new version) HCAL Stack and MTB6 beam Reduced Capabilities : +- 300 mm on x axis +- 300 mm on y axis + 35° around y axis Technical Review Meeting (extended version)

  21. HCAL Movable TableHCAL Stack Support and Turning Device Turning Device needs a crane to rotate the Stack Support Not possible in the test beam area ! Technical Review Meeting (extended version)

  22. HCAL Movable Tablerotated HCAL Stack Support and Turning Device Stack rotated by 90° around x-axis Not possible in the test beam area ! Technical Review Meeting (extended version)

  23. HCAL Movable Tablerotated HCAL Stack 35° around y-axis Technical Review Meeting (extended version)

  24. HCAL Setup in test beam areaFermilab test beam area MTB6 HCAL Movable Table 2D drawing from the MTB webpage Technical Review Meeting (extended version)

  25. HCAL Setup in test beam areaconversion to metric and some guesses 3D information about the beam together with old webpage only! HCAL Movable Table placed in MTB6-B3 Technical Review Meeting (extended version)

  26. HCAL Setup in test beam areaguess: 3 Meter inner height dump shielding concrete roof support Technical Review Meeting (extended version)

  27. HCAL Setup in test beam areaguess: roof openings are projected to 2D drawing roof opening Technical Review Meeting (extended version)

  28. HCAL Setup in test beam areaguess: permanent closed roof (except openings) • installation of Movable Table and Stack with “tricks” only • installation of AHCAL Layers in position B3 critical • 90 ° turning of the Stack not possible: No cosmic test! Technical Review Meeting (extended version)

  29. HCAL Setup in test beam areaguess: roof opening is big enough Technical Review Meeting (extended version)

  30. HCAL Setup in test beam areaguess: crane height and crane load critical needed hook height over roof 2.5 m transport weight 12 tons Technical Review Meeting (extended version)

  31. HCAL Setup in test beam areaguess: one escape route is not sufficient Escape rote from B4 blocked Technical Review Meeting (extended version)

  32. HCAL Setup in test beam areaECAL and HCAL on Movable Table and Tail Catcher in MTB6 Tail Catcher Electronic Racks HCAL ECAL Beam Technical Review Meeting (extended version)

  33. HCAL Stack and Tail CatcherTail Catcher installed in B3/B4, transport way kept free transport way Technical Review Meeting (extended version)

  34. HCAL Stack and Tail CatcherHCAL Stack nominal, Tail Catcher nominal distance Stack to Tail Catcher 350 mm Technical Review Meeting (extended version)

  35. HCAL Stack and Tail CatcherHCAL Stack rotated 35°, Tail Catcher retracted distance Stack to Tail Catcher 700 mm Technical Review Meeting (extended version)

  36. HCAL Stack and ECALECAL with standalone movable table only top part will be fixed on HCAL Stack Technical Review Meeting (extended version)

  37. HCAL Stack and ECALECAL is fixed do the first absorber plate ECAL outline ECAL support Technical Review Meeting (extended version)

  38. HCAL Stack and DHCALDHCAL must fit into the Stack Support Problem : no DHCAL drawing available DHCAL has VFE on both sides existing gap between side plate and absorber plate is not wide enough Technical Review Meeting (extended version)

  39. Conclusion many Questions sometime many answers but for sure solutions Technical Review Meeting (extended version)

More Related