1 / 29

Objectives

Objectives. Finish with Electric Systems (protective devices) HW4 (part 2) Practice circuits problems for Next Class Quiz Exams 2 (next Tuesday) FE exam. Next class QUIZ. Circuits Chapters 11 and 13. Exam 2 Tuesday (April 30 th ). In class (same as the previous one)

mangusd
Download Presentation

Objectives

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Objectives • Finish with • Electric Systems (protective devices) • HW4 (part 2) • Practice circuits problems for • Next Class Quiz • Exams 2 (next Tuesday) • FE exam

  2. Next class QUIZ • Circuits • Chapters 11 and 13

  3. Exam 2Tuesday (April 30th) In class (same as the previous one) • Circuits (chapter 10 & 11 & class examples) • AC vs. DC; single phase vs. 3 phase • Pricing (HW4 part 1) • Electric systems and wiring (chapter 11 &13 HW4 part 2)

  4. Protective Devices • What are we protecting from? • Overcurrent • Overvoltage • Circuit breakers • Switch that responds to thermal or short circuit loads • Can be bimetal, magnetic, or electronic • Reusable, remote control, compact, can be used as disconnect switch • Fuses • Melting metal • Self destructive, larger

  5. Why use fuses instead of circuit breakers? • Fuses can be used multiple times • Fuses are more aesthetically pleasing • Fuses are safer • Fuses cause less damage to equipment

  6. Ref: Tao and Janis (2001)

  7. Motor starters • ON-OFF switches are NOT for motors • Motor circuit-rated switches • Reduce the current during the start until the motor rich full speed • Protect the motor form overload • Emergency power systems Batteries Power generators Reading Assignment: Chapter 11

  8. Residential Systems(NEC Article 220-Branch Circuit, Feeder and Service Calculations) • Very little variation between different houses • Many similarities to commercial buildings • Particularly as you get close to end uses • Need to be watchful for unusual circumstances

  9. Wiring from panel to: receptacles, lighting, ceiling fan,….. Feeders and conduit House branch circuits Electric panels

  10. Electric panel - 3 wire 1 phase 120/240

  11. Procedure • Analyze building needs • Determine electrical loads • Select electrical systems • Coordinate with other design decisions • Prepare plans and specifications

  12. List of needs • Appliances (incl. HVAC) • Receptacles • Ground fault protected (GFI/GFCI) • Switched • Lighting • Switches • Ceiling Fans

  13. Example House • Master Bedroom • Bathrooms • Entry and Outdoor (AC compressor) • Bedrooms • Dining and Mechanical Closet (resistance heat) • Kitchen (appliance circuits, range, oven) • Family • Garage/Laundry/Closet (resistance water heater, dryer)

  14. Outdoor Bathroom Closet Bedroom 2 Laundry Kitchen Bathroom Mechanical closet Family room Master Bedroom Entry Bedroom 3 Dining Garage

  15. Residential system sizing Typically 3 wire 1 phase system 120/240 V • Procedure defined by NEC article 220: • Identify characteristic electrical loads • Add lighting (3W/ft2) • Add two 20 Amps circuits for kitchen • Add one 20 Amps circuit for laundry • Electricity for HVAC equipment based on requirement for heating or cooling

  16. Summary of Power Sizing • Include enough capacity for heating and cooling • Work through kitchen and then other rooms • Include any items that are unusual • Take first 10 kVA and then 40% of remaining load

  17. Panel Sizing • Find panel power usage and neutral usage • Size panel conductors and associated conduit and switches

  18. Electric panel - 3 wire 1 phase 120/240

  19. Wiring from panel to: receptacles, lighting, ceiling fan,….. Feeders and conduit House circuits Electric panels

  20. Outdoor Bathroom Closet Bedroom 2 Laundry Kitchen Bathroom Mechanical closet Family room Master Bedroom Entry Bedroom 3 Dining Garage

  21. Homework 4 - problem 2 • Sizing the residential electrical system • Defined by NEC article 220-30 (BOOK chapter 13) • Similar to the example we worked out • You need to collect the data for several characteristic consumers • Includes conductor sizing

  22. HW4 (problem 1)

  23. Circuit problems (for practicing)Start with problems that Yune provided:http://www.ce.utexas.edu/prof/Novoselac/classes/ARE346N/Handouts.html

  24. Example problem 1 What is the potential difference (voltage) across the 20-Ω resistor? a. 3.2 V b. 7.8 V c. 11 V • 5.0 V • 8.6 V

  25. Example problem 2

  26. Example problem 3 NOTE: After t = 5t, the capacitor acts like an open circuit

  27. Example problem 4 NOTE: Time constant of the circuit is t = RC = 15 ms. Time constant is the time to charge capacitor to 63%. [1- e-1]. To charge more (80%) you need more time.

More Related