1 / 21

Caterpillar Cat 320 GC Excavator (Prefix ZBT) Service Repair Manual (ZBT00001 and up)

service repair manual

kmyhu8hnadkm
Download Presentation

Caterpillar Cat 320 GC Excavator (Prefix ZBT) Service Repair Manual (ZBT00001 and up)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Service Repair Manual Models 320 GC Excavator

  2. w 1/18(W) Shutdown SIS Previous Screen Product: EXCAVATOR Model: 320 GC EXCAVATOR ZBT Configuration: 320 GC Excavator ZBT00001-UP (MACHINE) POWERED BY C4.4 Engine Disassembly and Assembly 320GC, 320 and 323 Excavators Machine Systems Media Number -M0080364-08 Publication Date -01/09/2018 Date Updated -12/09/2018 i07505832 Travel Motor - Disassemble SMCS - 4351-015 Disassembly Procedure Reference: Special Instruction, "Visual Service Procedures - Colors and Symbols" , M0066576 Table 1 Required Tools Tool Part Number Part Description Qty 1P-2420 Transmission Repair Stand 1 A FT-0957 Positioning Gp 3 - M16x2 Threaded Rod 3 B 8T-1757 Nut 9 9X-8268 Washer 9 C 421-5662 Lifting Eye Assembly 1 D 421-5663 Lifting Eye Assembly 2 1U-9895 Crossblock 1 E 3H-0465 Push-Puller Plate 1 8T-0298 Bolt 2 Start By: a. Remove the travel motor. https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 2019/12/14

  3. w 2/18(W) Illustration 1 g06345315 Remove plugs and the O-ring seals. Illustration 2 g06344354 Remove plug and the O-ring seal. Repeat for the opposite side. https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 2019/12/14

  4. w 3/18(W) Personal injury can result from being struck by parts propelled by a released spring force. Make sure to wear all necessary protective equipment. Follow the recommended procedure and use all recommended tooling to release the spring force. Illustration 3 g06344402 Remove plug and the O-ring seal. Repeat for the opposite side. https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 2019/12/14

  5. w 4/18(W) Illustration 4 g06344420 Illustration 5 g06344422 Personal injury can result from being struck by parts propelled by a released spring force. https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 2019/12/14

  6. w 5/18(W) Make sure to wear all necessary protective equipment. Follow the recommended procedure and use all recommended tooling to release the spring force. Illustration 6 g06344430 Repeat for the opposite side. https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 2019/12/14

  7. w 6/18(W) Illustration 7 g06344444 Repeat for the opposite side. Personal injury can result from being struck by parts propelled by a released spring force. Make sure to wear all necessary protective equipment. Follow the recommended procedure and use all recommended tooling to release the spring force. Illustration 8 g06344453 Repeat for the opposite side. https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 2019/12/14

  8. w 7/18(W) Illustration 9 g06344464 Illustration 10 g06344670 Repeat for the opposite side. https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 2019/12/14

  9. w 8/18(W) Illustration 11 g06344677 Repeat for the opposite side. Personal injury can result from being struck by parts propelled by a released spring force. Make sure to wear all necessary protective equipment. Follow the recommended procedure and use all recommended tooling to release the spring force. https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 2019/12/14

  10. w 9/18(W) Illustration 12 g06344721 Remove the nuts of Tooling (B). Illustration 13 g06344754 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 2019/12/14

  11. w 10/18(W) Illustration 14 g06344762 Illustration 15 g06344776 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 2019/12/14

  12. w 11/18(W) Illustration 16 g06344788 Remove the housing from the Tooling and place on a suitable bench. To avoid personal injury, always wear eye and face protection when using pressurized air. https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 2019/12/14

  13. w 12/18(W) Illustration 17 g06344880 Use air pressure to unseat the brake piston. Illustration 18 g06344925 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 2019/12/14

  14. w 13/18(W) Illustration 19 g06344940 Illustration 20 g06344938 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 2019/12/14

  15. w 14/18(W) Illustration 21 g06344946 Illustration 22 g06345220 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 2019/12/14

  16. w 15/18(W) Illustration 23 g06345227 Illustration 24 g06345238 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 2019/12/14

  17. Thank you very much for your reading. Please Click Here. Then Get COMPLETE MANUAL. NO WAITING NOTE: If there is no response to click on the link above, please download the PDF document first and then click on it.

  18. w 16/18(W) Illustration 25 g06345243 Illustration 26 g06345252 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 2019/12/14

  19. w 17/18(W) Illustration 27 g06345266 Illustration 28 g06345270 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 2019/12/14

  20. w 18/18(W) Illustration 29 g06345278 Copyright 1993 - 2019 Caterpillar Inc. Sat Dec 14 21:35:51 UTC+0800 2019 All Rights Reserved. Private Network For SIS Licensees. https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 2019/12/14

  21. w 1/16(W) Shutdown SIS Previous Screen Product: EXCAVATOR Model: 320 GC EXCAVATOR ZBT Configuration: 320 GC Excavator ZBT00001-UP (MACHINE) POWERED BY C4.4 Engine Disassembly and Assembly 320GC, 320 and 323 Excavators Machine Systems Media Number -M0080364-08 Publication Date -01/09/2018 Date Updated -12/09/2018 i06969908 Travel Motor - Assemble SMCS - 4351-016 Assembly Procedure Reference: Special Instruction, "Visual Service Procedures - Colors and Symbols" , M0066576 Table 1 Required Tools Tool Part Number Part Description Qty A 1P-0510 Driver Gp 1 https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 2019/12/14

More Related