1 / 1

MGS-153 Matte Coating: Innovative Water-Based Solution for Litho Applications

MGS-153 is a top-tier, water-based matte coating formulated specifically for wet-on-wet lithographic printing. This milky white liquid boasts a semi-gloss finish and is designed to provide excellent block, rub, and heat resistance without causing streaking issues. With a viscosity of 15-21” and a pH of 8.0-8.5, MGS-153 runs effectively on press, ensuring a smooth application. For optimal results, any viscosity adjustments should be made with water, and clean-up is easy with warm water and liquid detergent.

iola-sosa
Download Presentation

MGS-153 Matte Coating: Innovative Water-Based Solution for Litho Applications

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. IdeOnLLC249 Homestead RoadBuilding 5 Unit 1Hillsborough, NJ 08844Phone-908-431-3126 Fax-908-431-3127www.ideonllc.com Innovative Printing Solutions MGS-153 Matte Coating TYPICAL PROPERTIES • Appearance: Milky White Liquid • Viscosity: 15-21” / #3 Signature Zahn • Percent Solids: 41.4 - 45.4 • Density: 8.7 lbs / gallon • pH: 8.0 – 8.5 FEATURES & BENEFITS • MGS-153 is a water based coating formulated primarily for wet on wet litho applications • MGS-153 exhibits a non-burnishing, semi-gloss finish • MGS-153 offers good block, rub and heat resistance • MGS-153 will run extremely well on press and not cause any streaking problems commonly associated with matte coatings • MGS-153 is supplied press ready; any further viscosity reduction should be done with straight water • Clean-up should be done with warm water and liquid detergent immediately upon completion of the press run DISCLAIMER: Although the data supplied herein is believed to be correct in every detail, it is important to recognize that this information is presented without guarantee or responsibility as to the applicability or suitability of our products, whether used singly or in combination with other products. The products referred to above are sold without warranty, expressed or implied, and are purchased at the buyer’s own risk.

More Related