1 / 13

Analog-to-digital Conversion and Digital-to-analog Conversion (with DSP)

Analog-to-digital Conversion and Digital-to-analog Conversion (with DSP). ES-3. 8R. V 1. V OUT. 4R. V 2. 2R. V 4. R. V 8. 8R. A very simple (…too simple!) Digital-to-analog converter. A simple Analog-to-digital converter. Analog Input. +. -. scitec.uwichill.edu.bb.

imani-roman
Download Presentation

Analog-to-digital Conversion and Digital-to-analog Conversion (with DSP)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Analog-to-digital ConversionandDigital-to-analog Conversion(with DSP) ES-3

  2. 8R V1 VOUT 4R V2 2R V4 R V8 8R A very simple (…too simple!)Digital-to-analog converter

  3. A simpleAnalog-to-digital converter Analog Input + - scitec.uwichill.edu.bb

  4. A simpleAnalog-to-digital converter Analog Input 3.5v + high low - 0v 3v 2v 3v 4v 1v 0 0 0 0 0 1 0 0 0 0 0 0 0 0 1 1 0 0 0 0 0 1 0 0 0 0 0 0 0 0 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 1 Improve accuracy: scale the DAC scitec.uwichill.edu.bb

  5. Nyquist Sampling RateThe sampling of data must be at least twice the rate as the maximum frequency of the analog signal: fs>2fmax V(t) Time, t Use a low pass filter with fc = fmax to remove harmonics  sine

  6. Aliasing Nyquist Sampling RateThe sampling of data must be at least twice the rate as the maximum frequency of the analog signal : fs>2fmax V(t) Time, t

  7. Digital Signal Processing

  8. Running average of 10 pts

  9. Find the average of N points Digital FilteringRemoving Noise and Interference from a Digital Signal

  10. sine + noise filtered noise FFT of a noisy sine wave and its digitally filtered signal

  11. DSP Example

  12. Vin(n-12) Vin(n) Simple Notch Filterto remove 60 Hz interference Vin(n) fS = 1440 samples per second 60 Hz sine t (s) 1/60 s Vout(n) = Vin(n) + Vin(n - fs / 2fnotch) = Vin(n)+Vin(n-12) This adds the sample that is 1800 out of phase at 60 Hz

  13. Matlab demo es3_60Hz.m

More Related