1 / 3

TRANCO Model SD 1036 Core-Winding Machine

The SD 1036 is the original model of TRANCO core-winding machines. Its small footprint and flexible options make it an ideal solution for most core-winding applications.

iamtheonex
Download Presentation

TRANCO Model SD 1036 Core-Winding Machine

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Model SD 1036 Core-Winding Machine The SD 1036 is the original model of TRANCO core-winding machines. Its small footprint and flexible options make it an ideal solution for most core-winding applications. SD 1036 Features        Maximum Winding Speed: 400 Feet (121.92m) per minute Cut thickness: .007 to .014 inches (.1777mm – .356mm) Cutting Width: 3 inches (76mm) up to 10.5 inches (266mm) Minimum I.D.: 5 inches (114mm) Maximum O.D.: 36 inches (915mm) Max Core weight: 850lbs (385kg) Dimensions: 95” H, 108” W, 46” D

  2. OPTIONAL FEATURES:       5 – 3 inch Strip Width Adapter Pkg. 5 inch I.D. (requires Strip Width Adapter Pkg.) Manual safety door Fully automatic safety door Light curtain Dual cut capability Two servo operation Full PLC motion control system with ability to add up to 2 more servo drives Fused at 40 amps Dual Safety Hand Pads (used to operate machine in manual mode) Memory for recipes (can be held in HMI or PLC motion control) 10” Touchscreen HMI Ethernet connectivity for online support Individual IP address available Distributed Gap Cores Toroid Cores (no cuts) Concentric Cores Zig-Zag Cores Flare Cores Machine “STOP” set to either finished diameter, number of sheets or finished weight Programmable overlap of final cut Programmable to finished angle (for Tig welding or strapping) Sheets/Group can be set to any number Sheets/Group automatic increase HMI with continuous monitoring and display of BUILD, SPEED, CYCLE TIME, WEIGHT and number of SHEETS while machine is in RUN mode Additional displays available at customer’s request Additional module space to allow for expandability of discrete I/O for future sensors & controls Ability to interface with external safety devices 400ft/minute speed capability (based on strip width and thickness) Winding speed increase/decrease in increments of 5ft/per min. Any number of books of Gaps can be increased in size to help with forming process Toroid wraps can be added at beginning of cycle to help with forming process Wrap up turns (optional: additional Toroid wraps can be added to the finished Core) Capable of dual strip widths (additional cost) First gap sizing adjustment capability Speed compensation (ability to maintain approximate gap position when winding speed is changed) Gap Offset variable adjustment (allows operator to adjust spacing between gap start positions) Gap Size variable adjustment (allows operator to adjust the gap size as per Core specs) Density Adjustment (operator can adjust Density setting for correct weight parameters) Local language programmable on HMI (translation to be provided by customer)

  3. Contact TRANCO – The Core-Winding Machine Manufacturer Our Address TRANCO Production Machines Ltd. 20 Furbacher Lane – Unit 6 Aurora, Ontario, CANADA L4G 6W1 Telephone: +1.905.669.4840 Fax: +1.905.669.4841 Website: http://tranco.ca Sales: sales@tranco.ca Tech Support: techsupport@tranco.ca

More Related