SlideServe
Menu
Preferences
© SlideServe · v2026

BIOMED CAST

giulio avatar
5 slides · 319 Views · Sep 15, 2014

BIOMED Healthtech (P) LTD. BIOMED CAST. Biomed Cast orthopaedic casting tape is intended for immobilization of fractures, sprains and strains. Biomed Cast is made of knitted fiberglass substrate (Bio Cast) impregnated with polyurethane resin, which needs water – activating before use.

BIOMED CAST - slide 1
01 / 5BIOMED CAST
1 / 17

Download Presentation

BIOMED CAST
An Image/Link below is provided (as is) to download presentation

Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author.Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server.During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

More Related Content

Presentation Transcript
  1. BIOMED Healthtech (P) LTD. BIOMED CAST Biomed Cast orthopaedic casting tape is intended for immobilization of fractures, sprains and strains. Biomed Cast is made of knitted fiberglass substrate (Bio Cast) impregnated with polyurethane resin, which needs water – activating before use. It will set in approximately 5 minutes and be weight bearing in 20 minutes.

  2. Characteristics : ·Lightweight and strong ·Excellent X-ray radiolucency ·Easy and simple to use ·Superior end lamination ·Moisture resistant after setting ·Superior mouldability and flexibility for patient comfort ·Good air-permeability for reduced odor and skin irritation

  3. Instruction for Use 1.Apply a stockinette and a cotton cloth over the desire area to be cast. 2.Wear protective gloves. 3.Immerse Biomed Cast in water for 1-2 seconds. 4.Squeeze the tape gently to remove excess water. 5.Wrap the desired area with the tape. Do not apply tightly. Moulding and forming should be done at this time. Setting time is approximately 3-5 minutes. Functional strength will be achieved in 20 minutes.

  4. Biomed Healthtech Pvt. Ltd. 207, 2nd Floor, Marthanda, Dr. Annie Besant Road, Worli Naka, Mumbai 400018, India. Tel : 091-22-24911409 Fax : 091-22-24921598 Mobile : 9820235370 Email : biomedimp@vsnl.com Web : www.biomedimporters.com