1 / 14

KE Lee in Tektronix

오실로스코프를 이용한 측정방법. KE Lee in Tektronix. 레이다 관련 측정장비. -. Oscilloscope -. Pulse Counter -. Signal Source -. Power Meter. 오실로스코프 측정기능. -. 전압 -. 전류 -. 주파수 -. Amplitude -. 지터 -. Power. 전압. -. 최소/최대 측정전압: 1 mV-40kV -. probe name: BNC-P6015 - 감쇄비 : 1 X,1000X. 전류.

fisseha
Download Presentation

KE Lee in Tektronix

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. 오실로스코프를 이용한 측정방법 KE Lee in Tektronix

  2. 레이다 관련 측정장비 -. Oscilloscope -. Pulse Counter -. Signal Source -. Power Meter .

  3. 오실로스코프 측정기능 -. 전압 -. 전류 -. 주파수 -. Amplitude -. 지터 -. Power .

  4. 전압 -. 최소/최대 측정전압: 1mV-40kV -. probe name: BNC-P6015 - 감쇄비 : 1X,1000X 전류 -. 최대 측정전류: 20kA Peak -. probe name: P6021 w/CT4 - 감쇄비 : 1000X . .

  5. 주파수 -. 최대 측정 주파수: 6GHz -. name: TDS6604 지터 -. Period, Cycle, Random, Total jitter. Power -. True, 역률, Dynamic Road, Peak Finder .

  6. 지터(Jitter)란? • What is jitter? • “The deviation of an edge from where it should be” • Jitter is caused by: • (among other things) • Thermal noise • Crosstalk • Injected noise (EMI/RFI) • Circuit instabilities .

  7. Jitter Measurement Summary 0.0ns 0.990ns 2.000ns 2.980ns 4.000ns P1 P2 P3 P4 period 0.990ns 1.010ns 0.980ns 1.020ns cy-cy 0.020ns -0.030ns 0.040ns TIE -0.010ns 0.000ns -0.020ns 0.000ns Period Jitter = 18.3ps RMS (0.990/1.010/0.980/1.020) Cy-Cy Jitter = 36.1ps RMS (0.020/-0.030/0.040) TIE = 9.6ps RMS (-0.010/0.000/-0.020/0.000) .

  8. Total Jitter • Total jitter is the sum of all these effects Tj=(N*Rj)+Dj - Total Jitter where N is desired sigma Deterministic jitter . Random components

  9. ET Cursor Method .

  10. TDSJIT3 Real Time Method • Proprietary Rj/Dj Separation and BER Estimation • Based on real time acquisition data • Includes Golden PLL TIE measurements • Spectral Analysis used to decompose jitter • Wide noise margin – works even with substantial system noise • Works with short or long data repeats – no pattern details required (you provide bit rate and pattern length) • Trigger at any random point in your data • Works with CSA7000, TDS5000, TDS6000, TDS7000 instruments • Results for Rj, Dj, Pj, DDj, DCD, BER .

  11. Power Supply and Measurements Core Loss B-H Analysis True Power Apparent Power Power Factor Current harmonic Total Harmonic Distortion (THD) L G D N S G 40KHz CLOCK Switching Loss RDS on SOA . Modulation Analysis

  12. Oscilloscope Based Power Measurement and Analysis for .

  13. TDSJIT3 – TIE: Rj/Dj - BER • Displays results for Rj/Dj • Rj/Dj results are only available for TIE and PLL TIE measurements • Rj/Dj is a two step process: make the TIE measurement; then calculate Rj/Dj • Rj/Dj requires a repeating pattern, such that 100 repeats are captured in a single acquisition • You must know and enter the pattern length Rj is RMS, Dj is Pk-Pk, Tj is Pk-Pk …

  14. THANK YOU FOR YOUR ATTENDANCE

More Related