1 / 54

Psion Teklogix 8580 / 8590 Vehicle Mount Computer

Psion Teklogix 8580 / 8590 Vehicle Mount Computer. New 8580 and 8590. 8580 10.4“ SVGA (800 x 600) 400 NIT 8590 12.2“ XGA (1024 x 768) 400 NIT. Windows XP Professional or Windows XP Embedded. Windows XP Embedded. 100% “Componentized” version of OS

damali
Download Presentation

Psion Teklogix 8580 / 8590 Vehicle Mount Computer

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Psion Teklogix 8580 / 8590 Vehicle Mount Computer

  2. New 8580 and 8590 8580 • 10.4“ • SVGA (800 x 600) • 400 NIT 8590 • 12.2“ • XGA (1024 x 768) • 400 NIT Windows XP Professional or Windows XP Embedded

  3. Windows XP Embedded • 100% “Componentized” version of OS • Uses the same binaries as retail OS release • Divides the OS into fine-grain “components” • Over 10.000 individually selectable OS features, services and drivers • Choose only components needed for your device • “Lean and mean” OS image • Additional embedded-enabling features

  4. Operating System Choice Windows XP Embedded • English only • Very small build • Cost effective 1 GB CF card (2 and 4 GB options) • Less sensitive against temperature, shock and vibrations • For terminal emulation and small client applications (Citrix, Windows Terminal Services) Windows XP Professional • Different languages • Automotive 20 GB HDD • For bigger client applications which require a HDD

  5. 8580 / 8590 Front • Power-on key • Manual brightness adjustment • LEDs • Temperature (environmental controller) • Power • HD/CF activity • Touch screen

  6. 4 Front Panel Buttons

  7. 10 Front Panel Buttons

  8. 25 Front Panel Buttons Key mapping application included on every unit

  9. Config Tool (Front Panel)

  10. 8580 / 8590 Internals • XTX industrial standard CPU board • 800 MHz Intel Celeron M (1 GHz option) • 512 MB RAM • Aluminium Housing • Interface: 2 x serial RS232 (5 or 12 VDC), 2 x USB 2.0,PS/2 (mouse/keyboard), Ethernet 10/100 MBit • Internal: CF Socket and IDE Socket for HD, (PCI Slot)

  11. XTX Processor Board • XTX is an expansion and continuation of the ETX standard • Dedicated to be an open industrial standard (www.xtx-standard.org) Southbridge Northbridge Memory Slot

  12. PCIe MiniCard WLAN card Gigabyte GN-WI01GT • 802.11b/g • Cisco CCX version 3 compliant • Authentication (802.1x) • TLS • PEAP • TTLS • EAP FAST • Encryption • 64/128 bit WEP • TKIP • WPA • WPA2 (802.11i) • AES

  13. Standard and Custom Configurations • Standard Configurations • Short lead time (< 2 weeks) • Aggressive price • Higher volume • Custom Configurations • Longer lead time (6 weeks) • Less aggressive price • Lower volume High volume standard configurations enable decreasing costs and lead times

  14. Standard Configurations • 10” or 12” display • 800 MHz CPU • 4 keys on the display bezel • 1 GB CF card or 20 GB HDD • Windows XP Embedded or Windows XP Professional • Standard temperature • PCIe MiniCard 802.11b/g with 4 dBi internal antenna • 24 – 48 V power supply • 0, 5 or 12 V on COM1

  15. Custom Configurations • 1 GHz CPU • 10 or 25 keys on the display bezel • 2 or 4 GBytes CF card • Freezer version • PCIe MiniCard 802.11b/g with 5 dBi external antenna • 12 V power supply

  16. Baan Configurator Reserved for future options

  17. Baan Configurator Constraints • The O/S selection is linked to the storage choice: • HDD = XP Professional • CF = XP Embedded • A direct choice of the O/S is not possible. The O/S language can only be chosen with XP Professional XP Embedded is available in English only

  18. Connecting & Set-Up

  19. Connectors Below is a view of the unit’s connectors. Please note the voltage and fuse values will depend on the model / power requirements of each unit. • 24-48 VDC, 60 W (Standard) • 24-48 VDC, 100 W (Freezer) • 12 VDC, 100 W (Standard or Freezer) • 6.3 A • 12.5 A • 16 A

  20. Cable Cover Mount

  21. DC Power Cable Adapter Choice The PTX power extension cable (13985-301) is supplied with every unit. Connect to truck power and either Ignition or Screen Blanking signal. Both (auto power-off with ignition and screen blanking) is not possible! Ignition Screen Blanking

  22. On / Off Power Button • As strange as it may seem the Power On / Off button may, or may not, be used to power the device on, or off. • The device is powered up by first connecting it to an appropriate power supply and then, depending on the version of the device, either using the power switch or the ignition signal. • Configuration in the Config Tool!

  23. Switch On • When the ignition is switched on, the 8580/90 is supplied with voltage and begins checking its internal temperature and automatic switch-off function. • Once the ambient conditions have been verified as acceptable, the 8580/90 starts the operating system just like normal. • During the first three minutes of the start-up phase, none of the surrounding conditions, such as the internal temperature or the ignition input status, are checked. This allows the operating system and the operating software for the automatic switch-off module to fully load without interruption.

  24. Automatic Switch-off Process • The internal temperature of the unit and the status of the ignition input are checked continuously. If the inner temperature reaches a critical range, the operating system is shut down regularly and the computer remains switched off until the temperature is back within the permitted range. • If the ignition input is switched to earth potential or a potential-free source during normal operation, the unit shuts down after the delay time. In this state, the unit continues to operate normally until the delay time (for example, 15 minutes) has elapsed. • If the ignition is triggered again during this delay time, the 8580/90 resume normal operation. • After the delay time elapses, the unit is shut down automatically (for example after three minutes elapses, or a signal from the operating system is received).

  25. Config Tool (Automatic Switch-off)

  26. Accessories & Mounts

  27. Power Adapter AC Power Adapter (110/220 V) • Do not use the PS1400! • PS1410 for 24/48 V internal power supply • PS1420 for 12 V internal power supply External Pre-Regulator for trucks with batteries >48V External Uninterrupted Power Supply (UPS) • 2 versions: standard & freezer

  28. Mobile Mounting Bracket MT3420

  29. RAM Mounts

  30. RAM Mounts • Same offering as for the 8525/30 • But different VESA plate on the computer side! Different plates / clamps on the vehicle side 4” or 12” arm Always VESA plate

  31. When use which mount?

  32. Keyboard

  33. 24 Key Keypad

  34. Mounting the Keypad Console Keypad Console Elongated hole for rotating into the desired position

  35. Mounting the 24-Key Keypad The 24-key keypad can be mounted on the keypad console at two different heights.

  36. Scanners • Connect to either the USB, PS/2 or serial port • If connected to COM1, the scanner can be powered through the port • 5 or 12 V • Option, when configuring a unit (no software switch!)

  37. Scanner Holder MT3601-10 MT3601-12 For Symbol and PSC scanners Different holder for 8580 and 8590!

  38. Internal Antenna 4 dBi omni-directional antenna inside of the dome

  39. External Antenna 5 dBi omni-directional antenna connected by a reverse TNC connector The stubby and mag mount antennas of the 8525/30 use a reverse SMA connector!

  40. Software

  41. Config Tool Main features: • Central management tool • Diagnostic possibility for the hardware • Security option (password protected) • Windows network and security options • Enhanced write filter commands (XP embedded only)

  42. Software Keyboard Main view: • Complete keyboard function • Additional keys with „Alt“ „Ctrl“ „Alt Gr“ and „Shift“ function Terminal keyboard (second view): • Optimized for Telnet applications • Can be changed or optimized for other Telnet software programs

  43. Keyboard.cfg file Features: • One file to set all configuration for the software keyboard • Different background colors selectable • Free programmable (complete keyboard) • All possible keyboard layouts can be prepared!

  44. Com2Key (serial wedge) Features: • Software based serial wedge program • Supports a large number of scanners (Symbol, PSC, etc.) • Free programmable „Prefix“, „Suffix“ character • Special defined characters can be filtered • Easy configuration set via one text file

  45. Hampshire Touch Screen configuration • All settings and configuration over one tool: • Calibrate touch screen • Set Right click emulation settings • Touch calibration data can be exported and imported over the registry (8580touch.reg / 8590touch.reg)

  46. Screen Blanking • The program is not installed but can be found on every unit at C:\WIN_SCREEN_BLANKING_2.0.308_I296n • The screen blanking cable has to be connected to COM1 on one side and the fork lift truck on the other side • Set-up in the Control Panel

  47. PTX Standard Software • TekTerm • MCC

  48. Windows XP Pro Restore DVD • Contains all files for restoring the whole XP Professional image • Both images are available for restoring (8580 / 8590) • One language per restore DVD (English, French, German, etc.) • Windows i386 folder available for reinstalling components • Easy usage and restore process (graphical based) • Not supplied with every unit - the customer can to order it as an accessory (for example one per site / customer)

  49. Summary: Key Messages for 8580 8590 • Full Screen versatilityTake Windows XP right into the VMT/Warehouse environment – benefit is that no effort need to be spent to transform traditional full screen applications to small screen Windows CE devices • Front key configurations 4, 10, or 25 keys on the front at no extra cost • Latest industrial technologies and standardsThe unit utilizes the new XTX standard for Intel based industrial computers • Choice of Windows XP Professional or Windows XP Embedded Windows XP Embedded allows a system setup without a spinning drive, increasing the resistance against the violent shock and vibration transferred from vehicles • Large selection of accessoriesDifferent keyboards, scanners and printers allow unit to be customized to fit the application

  50. Further Information “The Source” • http://marketing.ptintranet.com/C4/8580%2090%20Vehicle-Mount%20Computer/default.aspx#List • Pictures, presentations, spec sheet, competition, video clips

More Related