Simple Steps to Unclog Your Bathtub Drain

1. Simple Steps to Unclog Your Bathtub Drain Badly maintained drains may result in either a slow-draining bathtub or a complete clog in the pipes. Such obstacles are typically caused by hairs, thick dirt, or other difficult-to- dissolve waste. Here, the question is: are you able to unclog your drain yourself, or do you have to call a professional plumber in Lake Anna? In this blog, we’ll educate you on how to unclog your bathtub drain effectively in no time. Steps to Unclog Your Bathtub Here are a few easy steps that you can follow to unclog your bathtub. Check below: Step 1: Take away the stopper and strainer. Initially, you need to eliminate the stopper’s cap and remove the strainer’s screws through the right head of a screwdriver. To prevent losing them, place the screws away from the clogged drain. Step 2. Remove additional waste material from the area surrounding the stopper. A large amount of waste material accumulates around the stopper and strainer over time. Use a washcloth or paper towel to remove it. Step 3. Insert the claw into the pipe to clear your clog.

2. After cleaning the stopper and strainer, insert the drain claw as deeply as possible into the pipe. To gather the majority of the debris in your drain, keep pushing into the drain trap as far as you can. Step 4. Take out the drain claw and clean it for further use. Start removing the claw gradually so that the dust, soap, and hair buildup can be collected by the tiny hooks. Step 5. Check the water flow and put everything back together. To check if all the debris has been removed, run some water. Hopefully, the water flows easily via the pipe. It's time to proceed with replacing your strainer if this is the situation. Your Bathtub is Still Not Draining? Sometimes the obstruction is considerably deep down the drain. In that case, DIY tricks don’t work. The best step to take is to call a reputable plumber in Orange City, regardless of the DIY techniques you try.