1 / 1

SMCS332SpW / SMCS116SpW SpaceWire compliant Communication Controller ASICs

SMCS332SpW / SMCS116SpW SpaceWire compliant Communication Controller ASICs Stephan Fischer, Lars Stopfkuchen, Uwe Liebstückel, Paul Rastetter, Luca Tunesi 2 EADS Astrium GmbH Munich, 2 ESA / ESTEC. Applications:

brandi
Download Presentation

SMCS332SpW / SMCS116SpW SpaceWire compliant Communication Controller ASICs

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. SMCS332SpW / SMCS116SpWSpaceWire compliant Communication Controller ASICs Stephan Fischer, Lars Stopfkuchen, Uwe Liebstückel, Paul Rastetter, Luca Tunesi2 EADS Astrium GmbH Munich, 2ESA / ESTEC • Applications: • Typical Environment : SMCS332SpW and SMCS116SpW within a point-to-point SpaceWire network • Motivation for Upgrading SMCS332 and SMCS116: • Existing SMCS332 and SMCS116 are often used, but not compliant to SpaceWire standard (ECSS-E-50-12A) • Anomalies shall be corrected • Need for protocol due to upcoming SpaceWire Networks with Routers • Advantages due to SpaceWire: • Resistance against simultaneous switching on the data and strobe inputs • ‘Hot’ pluggable, i.e. no Master-Slave situation has to be arranged • Time distribution possible • simple interface (approx. 5000 Gates) • high-speed (a few to hundreds of MBit/s) • Features of SMCS116SpW: • 1 SpaceWire link from 1.25 up to 200 MBit/s (100 MBit/s with 3 V supply) • supports Serial Transfer Universal Protocol (STUP) • Host Interface to program and control the SMCS116SpW • FIFO Interface configurable between 8 and 16 bit mode • ADC Interface allows to connect an ADC with a width of up to 16 bits • DAC Interface • Features of SMCS332SpW: • 3 SpaceWire links allowing full duplex communication with selectable bitrate from 1.25 up to 200 MBit/s (100 MBit/s with 3 V supply) • Communication Memory Interface (COMI) provides autonomous access to a communication memory. • 8/16/32-Bit Little or Big Endian mode is configurable • Host Control Interface gives read/write access to the configuration registers • Control-by-Link • Wormhole routing allows hardware routing of packets • RAM Interface provides a 8/16-bit data bus and a 16-bit address bus • 2 UART Interfaces • up to 24 GPIO • Two 32-bit on-chip timer • Enhanced 32-bit processor support • SEU FREE • SMCS332SpW as communicationinterface for a processor • New header field control bit that gives more flexibility for packet generation • Arbitrary packet length • No packet size restriction for data over COMI • SEU FREE • SMCS116SpW as communication controller for a memory • Implementation of SMCS332SpW • SEU free cell library (0,5 µm) from ATMEL • 196 pins ceramic quad flat pack (MQFP) • Power Consumption: 1,7 W (max) • Serial Transfer Universal Protocol (STUP): • implemented in SMCS116SpW • minimized complexity • makes it possible to use SMCS116SpW within a SpaceWire Network with distinct protocols • Implementation of SMCS116SpW • SEU free cell library (0,5 µm) from ATMEL • 100 pins ceramic quad flat pack (MQFP) • Power Consumption: 0,7 W (max) • leading path addresses are stripped off on the way through the network • Protocol Identifier follows the logical address, unknown protocol ID’s are ignored • for SMCS116SpW: first data byte is interpreted as command (read/write) in conjunction with 7- Bit SMCS116SpW register address • Checksum over data bytes is optional MAPLD 2005/182 -- Stopfkuchen

More Related