1 / 18

Chapter 6 The Nature of Energy

Chapter 6 The Nature of Energy. What is Energy? The capacity to do work or to produce heat The Law of Conservation Of Energy- energy is neither created or destroyed but converted from one form to another. Types of Energy. 1. Potential Energy-energy due to position

barbra
Download Presentation

Chapter 6 The Nature of Energy

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Chapter 6The Nature of Energy • What is Energy? • The capacity to do work or to produce heat • The Law of Conservation Of Energy- energy is neither created or destroyed but converted from one form to another

  2. Types of Energy • 1. Potential Energy-energy due to position • 2. Kinetic Energy- energy due to motion • KE = ½ mv2

  3. More Terms • Heat- the transfer of energy between two objects due to temperature differences • Temperature- a property which determines the direction heat will flow when two objects are brought into contact

  4. Con. • Work- a force acting over a distance • State Function- a property that depends only on its present state • Energy is a state function • System- part of the universe which we are focusing on( usually the reactants and products)

  5. More Terms!!! • Surroundings- everything else in the universe(examples could be the reaction container, the room, and anything else other than the reactants and products) • Exothermic-energy flows out of the system( heat is produced) • Endothermic-energy flows into the system( heat is absorbed

  6. Internal Energy(E) E = q + w E is the change in the system’s internal energy q represents heat w represents work q= +x (endothermic, heat flows in) q= -x (exothermic, heat flows out) w is neg. if energy flows out(system does work on the surroundings) w is pos. if energy flows in( surroundings do work on the system

  7. Example • Calculate E for a system where 1.40 kJ of work is done on the system undergoing an endothermic process in which 15.6 kJ of heat flows into the system. E = q + w = 15.6kJ + 1.4kJ= 17.0kJ

  8. PV Work w = -PV Example: Calculate the work associated with the expansion of a gas from 46 L to 64 L at a constant external pressure of 15 atm.

  9. Examplep.247 6.3 • A balloon is being inflated to its full extent by heating the air inside it. In the final stages of this process, the volume of the balloon changes from 4.00x106 L to 4.50x106 L by the addition of 1.3x108 J of energy as heat. Assuming that the balloon expands against a constant pressure of 1.0 atm, calculate E for the process. ( To convert between L•atm and J, use 1 L•atm=101.3 J.

  10. Enthalpy and Calorimetry Enthalpy (H) = E + PV Remember that E = qp + w so E = qp - P V so qp = E + PV Now if H = E + (PV) so H = E + PV H = qp

  11. Example • When one mole of methane is burned at a constant pressure, 890 kJ of energy is released as heat. Calculate H for a process in which a 5.8 g sample of methane is burned at constant pressure.

  12. Calorimetry • - a device use to determine the heat associated with a chemical reaction • Heat Capacity(C)= heat absorbed increase in temp. Specific heat capacity- the energy required to raise the temperature of one gram of a substance by one degree Celsius Molar heat capacity- the energy required to raise the temperature of one mole of a substance by one degree Celsius

  13. Constant Pressure Calorimetry • Is used in determining the changes in enthalpy(heats of reactions) for reactions occurring in solution • Energy released= s x m x T where • S= specific heat capacity • M= mass of solution • T= increase in temperature

  14. Example p. 252, 6.5 • When 1.00 L of 1.00 M Ba(NO3)2 solution at 25.0°C is mixed with 1.00 L of 1.00 M Na2SO4 solution at 25.0°C in a calorimeter, the white solid BaSO4 forms and the temperature of the mixture increases to 28.1°C. Assuming that the calorimeter absorbs only a negligible quantity of heat, that the specific heat capacity of the solution is 4.18J/°C•g, and that the density of the final solution is 1.0 g/ml, calculate the enthalpy change per mole of BaSO4 formed.

  15. Hess’s Law • In going from a particular set of reactants to a particular set of products, the change in enthalpy is the same whether the reaction takes place in one step or in a series of steps.

  16. Characteristics of Enthalpy Changes • If a reaction is reversed, the sign of H is also reversed. • If the coefficients in a balanced reaction are multiplied by an integer, the value of H is multiplied by the same integer.

  17. Example • Two forms of carbon are graphite and diamond. Using the enthalpies of combustion for graphite and diamond, calculate H for the conversion of graphite to carbon: Cgraphite(s)  Cdiamond(s) The combustion reactions are Cgraphite(s) +O2(g)  CO2(g) H =-394kJ Cdiamond(s) + O2(g)  CO2(g) H =-396kJ

  18. Example Calculate H for the synthesis of diborane from its elements according to the following: 2B(s) + 3H2(g)  B2H6(g) Use the following reactions: 2B(s) +3/2O2(g) B2O3(s) H =-1273kJ B2H6(g) +3O2(g)  B2O3(s)+3H2O(g) H =-2035 kJ H2(g) + ½O2(g)  H2O(l) H= -286 kJ H2O(l)  H2O(g) H = 44kJ

More Related