1 / 38

NUMICRO MCU LEARNING BOARD SDK INSTALLATION

NUMICRO MCU LEARNING BOARD SDK INSTALLATION. Outline. 1. Install ARM Keil MDK 2. Install NuLink Driver 3. Install NUC140BSP. SDK INSTALLATIONS. IDE : I ntegrated D evelopment E nvironment ARM Keil MDK https://www.keil.com/demo/eval/arm.htm Execute mdk501.exe to install

baker-mcleod
Download Presentation

NUMICRO MCU LEARNING BOARD SDK INSTALLATION

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. NUMICRO MCU LEARNING BOARD SDK INSTALLATION

  2. Outline 1. Install ARM Keil MDK 2. Install NuLink Driver • 3.Install NUC140BSP

  3. SDK INSTALLATIONS • IDE: Integrated Development Environment • ARM Keil MDK https://www.keil.com/demo/eval/arm.htm • Execute mdk501.exe to install • NuLink Driver : PC USB Driver for NuMicro ICE • Nu-Link_Keil_Driver_1.24.6211 • unzip & run Nu-Link_Keil_Driver_1.24.6211.exe to install • NUC140BSP • MCU Drivers • Sample Project

  4. 1. TO INSTALL KEIL MDK

  5. RUN KEIL MDK

  6. KEIL MDK V5.01 SETUP PROGRAM

  7. KEIL LICENSE AGREEMENT

  8. AGREE & NEXT

  9. NO CHANGE ON FOLDER PATH

  10. ENTER USER INFO

  11. FILES INSTALLING

  12. FILES INSTALLING

  13. KEIL USB U-LINK

  14. KEIL MDK INSTALLATION FINISH

  15. OK ON KEIL PACK INSTALLER

  16. CLOSE PACK INSTALLER

  17. 2. INSTALL NULINK ICE USB DRIVER Click to Unzip This Nu-Link USB driver for on-board ICE to be recognized by PC

  18. NU-LINK_KEIL_DRIVER 1.24.6211.EXE Click to run the driver installation

  19. UNZIP & RUN INSTALLATION Click to run

  20. SELECT SETUP LANGUAGE & RUN Click to run

  21. START TO INSTALL NUMICRO NU-LINK DRIVER

  22. ACCEPT LICENSE AGREEMENT

  23. SETUP NU-LINK_KEIL FOLDER

  24. SELECT KEIL’S INSTALL DIRECTORY

  25. SELECT START MENU FOLDER

  26. SELECT START MENU FOLDER

  27. SETUP – NUMICRO NU-LINK DRIVER FOR KEIL Click to run

  28. INSTALLING

  29. FINISH Click to finish

  30. CONNECT LEARNING BOARD TO PC Nu-Link ICE’s USB connector

  31. PC INSTALLING DEVICE DRIVER PER USB PORT • PC found Nu-Link Device when plugin learning board • PC installing USB driver for Nu-Link ICE

  32. USB INPUT DEVICE INSTALLED • Device driver installed & USB ICE ready for use

  33. 3. UNZIP MCU DRIVER & SAMPLE CODES • Unzip NUC140BSP_EDU_720A to • D:\Nuvoton\ • NUC140BSP_720A contains • MCU Drivers • Sample project

  34. \NUVOTON\NUC140BSP_720A\ MCU documents MCU device drivers/libraries

  35. \NUVOTON\NUC140BSP_720A\LIBRARY MCU sample codes

  36. \NUVOTON\NUC140BSP_720A\SAMPLECODE

  37. BUILD

  38. RUN • 1.按下debug按鈕(同時會將程式Download到晶片中) • 2.按下RUN執行 • 3.結束時”務必”再按一次DEBUG(離開除錯mode)再拔線

More Related