1 / 13

Rebuilding the Gulf Coast in the Aftermath of Hurricane Katrina: Corrosion Control and Mitigation

Rebuilding the Gulf Coast in the Aftermath of Hurricane Katrina: Corrosion Control and Mitigation. Janice K. Lomness Corrosion Technology Laboratory NASA Kennedy Space Center, FL 32899. Introduction. Corrosion is a widespread and costly problem.

anstice
Download Presentation

Rebuilding the Gulf Coast in the Aftermath of Hurricane Katrina: Corrosion Control and Mitigation

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Rebuilding the Gulf Coast in the Aftermath of Hurricane Katrina: Corrosion Control and Mitigation Janice K. Lomness Corrosion Technology Laboratory NASA Kennedy Space Center, FL 32899

  2. Introduction • Corrosion is a widespread and costly problem. • Corrosion costs the United States over $300 billion each year. • Rebuilding or repairing hurricane damage. • Corrosion control and mitigation into the design, materials selection, or repair stage of development. • Avoid catastrophic failures and expensive repairs.

  3. Corrosion Control and Mitigation • Design Engineers, Material Science Engineers, and Corrosion Experts. • Identify forms of corrosion that will affect system being developed. • Uniform Corrosion, Pitting Corrosion, Crevice Corrosion, Filiform Corrosion, Erosion Corrosion, Galvanic Corrosion, Selective Leaching/Dealloying, Intergranular and Exfoliation Corrosion, Stress Corrosion Cracking, Corrosion Fatigue, Fretting Corrosion

  4. Corrosion Control and Mitigation • Design consideration • Material properties that influence the degradation of the material and the probability for a particular form of corrosion of the material to lead to catastrophic failure. • Determine the extent by which a specific form of corrosion affects a material. • Susceptibility of the material to corrosion • Susceptible alloys • Resistant alloys AMPTIAC Quarterly Volume 9, Number 3, 2005 AMPTIAC Material Failure Modes Desk Reference

  5. Kennedy Space Centers Experience with Corrosion The launch environment at KSC is extremely corrosive: • Ocean salt spray • Heat • Humidity • Sunlight

  6. In 1981 the Space Shuttle introduced acidic deposition conditions SRB Exhaust

  7. Vehicle Assembly Building • 525 ft tall • 716 ft long • 518 ft wide • Covers 8 acres • Encloses 129,428,000 ft3 • Rose Bowl or Yankee Stadium could fit on roof.

  8. VAB Corrosion Mitigation • Corrosion due to the presence of salt resulting from the exposure to sea water or the use of contaminated aggregate in the original concrete mix. • Destroy the structural integrity of steel reinforced concrete structures. • Cathodic protection can eliminate costly cycle of concrete repairs and repeated assessments due to corrosion.

  9. VAB Roof Repair

  10. Mains Power Source DATA OUTPUT METERS COMPUTER CONTROL Monitoring Unit DC Power Supply Signal ANODE CABLING CATHODE CABLING SIGNAL CABLING CONNECTIONS CONNECTIONS PROTECTED STEEL CONCRETE (Electrolyte) ANODE SYSTEM REFERENCE ELECTRODE Cathodic Protection

  11. VAB Corrosion Mitigation

  12. VAB Corrosion Mitigation Conductive Mastic

  13. Conclusions • Incorporation of corrosion control and mitigation into the design and material selection phase of planning and development. • Taking advantage of new and improved technologies could dramatically reduce expensive corrosion related repairs and possible catastrophic failures.

More Related